- Add Firmware Variants table (OLED vs e-ink) with filenames
- Add E-ink Display section covering adaptive layout, rotation, scaled dots,
suppressed clock seconds
- Update Settings > Display: add Display rotation (e-ink only) entry, update
Font entry to reflect it's now built into all builds
- Update Settings > Home Pages: document LEFT/RIGHT ordering and always-visible
Settings/Messages pages
- Replace "Font Switcher Build" section with "Font Switcher" — font is now
built into every variant, no separate download needed
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NodePrefs: add page_order[11] (1-indexed bit-index, 0=end/legacy).
DataStore: persist page_order appended after use_lemon_font.
UITask/HomeScreen:
- bitToPage(): maps stable bit indices 0-10 to HomePage enum values
- buildVisibleOrder(): respects page_order when initialised, else
falls back to default enum sequence
- navPage() and navigation dots use buildVisibleOrder()
SettingsScreen Home Pages section:
- Add Settings (bit 9) and Messages (bit 10) — show as "always"
- LEFT/RIGHT on any home page item moves it earlier/later in order
- ENTER toggles ON/OFF for pages that can be disabled
- Position number shown before label once custom order is active
- ensurePageOrderInit() seeds default order on first reorder action
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Split the single build job into two independent jobs:
- build-oled: checks out wio-tracker-l1-improvements, builds WioTrackerL1_companion_radio_dual_settings
- build-eink: checks out eink-ui, builds WioTrackerL1Eink_companion_radio_dual
Both artifacts are merged into a single draft release.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Font-switcher is now part of wio-tracker-l1-improvements, so there is
no longer a separate branch to check out. Drop the build-font-switcher
job and its download step in release; a single build produces the
combined dual-BLE/USB + font-switcher firmware.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The font preference was not saved to or loaded from flash, so it would
reset to default (Adafruit font) on every boot. Added to the versioned
DataStore read/write chain in the same pattern as other recently added
fields (auto_lock, dm_melody etc.).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without _next_refresh = 0 the Settings screen would continue using its
2-second refresh interval after a font change, showing stale rendering
for up to 2 seconds. Mirrors the pattern used by setBrightnessLevel().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add Lemon font (LemonFont.h, LemonIcons.h) to the standard build
alongside the Adafruit built-in font; ~101 KB added to flash
- SH1106Display: add _use_lemon flag + setLemonFont(bool) to switch
at runtime; print() and getTextWidth() use Lemon path when active;
translateUTF8ToBlocks() passes UTF-8 through unchanged (Lemon supports
full Unicode U+0020-U+04FF) vs transliterating for the default font
- DisplayDriver: add getCharWidth()/getLineHeight() virtuals (defaults 6/8);
SH1106Display returns 5/9 for Lemon, 6/8 for default; add setLemonFont()
no-op virtual; fix orphaned UTF-8 leading byte in drawTextEllipsized
- FullscreenMsgView: replace fixed-char-count word-wrap with pixel-accurate
wrap using display.getTextWidth(); use getLineHeight() for spacing so
Lemon (9 px) and default (8 px) both render correctly
- NodePrefs: add use_lemon_font field (0=default, 1=Lemon)
- SettingsScreen: add "Font" item in Display section (Default / Lemon),
calls UITask::applyFont() on change
- UITask: add applyFont() that calls display->setLemonFont(use_lemon_font);
called at startup (begin()) and when the setting changes
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- DualSerialInterface: guard writeFrame/isWriteBusy/isBLEConnected with
_ble_enabled to avoid BLE-after-disable race
- NearbyScreen: initialize all fields in constructor; promote D_* layout
constants to class scope; clamp _dscroll on result count change;
replace hardcoded 2 with D_VISIBLE in scroll logic; allow re-scan
from detail view via KEY_CONTEXT_MENU/KEY_ENTER
- variant.cpp: fix inconsistent indentation in initVariant()
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Toggle in Settings > Display > Format. In 12h mode the clock shows
h:mm AM/PM (or h:mm:ss AM/PM with seconds, no space before AM/PM).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reply prefix was eating ~9 chars of display width, causing the actual
message body to be ellipsized in list cards. Fullscreen view already
showed the recipient correctly via the To: header line.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- DualSerialInterface: enable()/disable() control BLE only, USB always on;
USB state machine not read while BLE connected to avoid partial-frame
corruption; reset USB on BLE disconnect for clean reconnect
- Fix -UBLE_DEBUG_LOGGING (no space) to avoid PlatformIO SCons parse error
- build.sh: drop separate USB/BLE builds, dual_settings only
- wio-tracker-l1-eink: enable DUAL_SERIAL in companion_radio_ble build
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
base64.hpp is header-only; including it in a .h file pulled into multiple
translation units caused duplicate symbol errors at link time.
Replaced with a self-contained static pubKeyToBase64() method inside
NearbyScreen that implements the same standard base64 encoding without
any external include.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces "Type: Repeater" line with the node's full public key encoded
as base64 (44 chars). drawTextEllipsized clips it with ... to fit the
128px wide display. Type is already visible in the inverted header.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Card body now shows only "RSSI:-87 SNR:7" (Rem was too long to fit).
List view:
- UP/DOWN selects items; selected card fully inverted, unselected keeps header-only highlight
- Enter opens full-screen detail for selected node
- Long-press Enter (context menu) re-scans
Detail screen:
- Inverted title bar with node name (or [Type])
- Type / RSSI / SNR / Rem / Status lines
- Cancel or context menu returns to discover list
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Each discovered node now renders as a boxed 2-line card (same style as
message history):
┌──────────────────────────────┐
│ NodeName (or [Sensor]) Type │ ← inverted header
│ RSSI:-87 SNR:7 Rem:5 │ ← signal stats
└──────────────────────────────┘
Add snr_x4 and remote_snr_x4 to DiscoverResult:
snr_x4 = _radio->getLastSNR()*4 (how well we heard the response)
remote_snr_x4 = payload[1] (how well responder heard our request)
2 items visible at a time; UP/DOWN scroll through results.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add rssi field to DiscoverResult, captured from _radio->getLastRSSI()
when the discover response is received.
Display format in the right column:
known node → "Rpt-87" / "Snsr-92" (type + dBm)
new node → "*-87" (asterisk + dBm; type already visible in "[Rpt]" label)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The !isBLEConnected() check was too restrictive — if BLE happened to be
connected (app in background) the standalone discover would silently drop
all responses. Tag matching already provides correct isolation: responses
matching _pending_node_discover_tag are handled by the standalone UI and
not forwarded to the BLE app; responses with a different tag fall through
to the normal forward path.
Also show short type names (Rpt/Snsr/Room) in the discover results list
instead of generic "known"/"NEW", with a '*' prefix for nodes not yet
in contacts — matching the repeater/sensor distinction the app shows.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
[M] key doesn't exist on the device; context menu is long-press Enter.
Also handle KEY_ENTER directly when the list is empty so the hint
is accurate — pressing Enter with no contacts enters discover mode
without going through the context menu.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces the inline advert scan in the nearby list with a proper
CTL_TYPE_NODE_DISCOVER_RESP-based sub-screen accessible via the context menu.
- DiscoveredEntry → DiscoverResult: adds name[32] and is_known flag so
both known contacts and unknown nodes are shown with useful labels
- getDiscoveredNodes → getDiscoverResults, capacity 8 → 16
- onControlDataRecv populates name from contacts for known nodes and
records all respondents (not just unknowns)
- NearbyScreen gains _discover_mode sub-screen: 8-second scan window,
live result polling each render cycle, UP/DOWN scroll, CANCEL to
return, ENTER/M to re-scan; known nodes show actual name + "known",
unknown nodes show "[Type]" + "NEW"
- List view is clean: no discovered nodes mixed in, no scanning banner
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NearbyScreen now sends CTL_TYPE_NODE_DISCOVER_REQ (same protocol as the
companion app) instead of a plain self-advert. Nearby repeaters, sensors
and room servers respond with their pub_key and type. Known contacts get
their lastmod refreshed; unknown nodes appear as temporary entries (e.g.
"Repeater") in the list until their advert is received.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BLE takes priority when connected; USB is always ready as fallback.
Both state machines run continuously — no BLE disconnect on USB connect.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Build firmware from the font-switcher branch instead of font-lemon.
The font-switcher build includes both Adafruit and Lemon fonts in one
binary with a runtime toggle in Settings > Display.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Use inverted PWM polarity (0x8000) with PCT {2,5,12,25,50} giving
~6-8 dB perceptual steps (-24/-16/-9/-3/0 dB) vs the original
uneven steps where levels 4 and 5 were only 1 dB apart
- Guard against cmp=0 truncation in both _nrfStartPwm and applyVolume:
at level 1 with high notes (freq > ~2.5 kHz) integer math gives
cmp=0 which with inverted polarity means 100% HIGH → complete silence
- Change volume preview note from C5 (523 Hz) to C6 (1047 Hz) to better
match the piezo resonant frequency range and actual notification sounds
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stores RTC timestamp on each history entry and renders it right-aligned
on the sender row using a compact format (Xs/Xm/Xh/>1d).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Describes the font-lemon branch variant with native Unicode rendering,
pixel-accurate word wrap, and a link to the Lemon font source.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add build-lemon-font job that checks out the font-experiments branch and
builds with FIRMWARE_VERSION suffixed with -lemon-font, producing files
like WioTrackerL1_*-v1.15-plus.1.7-lemon-font-SHA.uf2. A separate
release job collects artifacts from both builds into one draft release.
Tag pattern narrowed from wio-tracker-* to wio-tracker-v* to avoid
triggering on wio-tracker-lemon-* tags.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Reply prefix changed to "@[nick] " format — bracket delimiter handles
nicks with spaces unambiguously
- FullscreenMsgView: parse "@[nick] body" to show "To: nick" header;
fall back gracefully if format not matched
- Reduce FS_CHARS 21→20 to prevent scroll arrows overlapping last char
- Transliterate nick before displaying in "To:" header and "RE:" title
so non-ASCII characters render correctly on the OLED font
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
_ctx_menu.render() was only called in CONTACT_PICK and CHANNEL_PICK,
so the reply popup was active but invisible in history views. Added
render calls for list view and fullscreen view in both DM_HIST and
CHANNEL_HIST phases.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Long-press Enter (KEY_CONTEXT_MENU) on a selected message shows an
'Options / Reply' popup in both list and fullscreen views. Confirming
opens MSG_PICK with 'RE: nick' title — the reply can be sent via
keyboard or quick message templates, both automatically prefixed with
'@nick '.
- Channel: reply prefix extracted from 'sender: message' format
- DM: reply available only on incoming messages, uses contact name
- FullscreenMsgView: REPLY added to Result enum, KEY_CONTEXT_MENU handled
- MSG_PICK: _reply_mode flag routes prefix through keyboard and templates
- Guard: prevent sending empty reply (prefix-only keyboard input ignored)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When a message starts with @nick, the fullscreen view expands the header
to show a second row 'To: nick' below the sender name, and displays the
message body without the @nick prefix.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
custom_msgs templates are up to 140 chars; the 80-byte msg[] buffer
silently truncated any message longer than 79 characters before sending.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
tryBotReplyChannel checked bot_channel_enabled but not bot_enabled,
so disabling the bot via the main Enable toggle had no effect on
channel replies. Added bot_enabled to the guard condition.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
auto_lock was defined in NodePrefs but missing from both loadPrefsInt
and savePrefs in DataStore.cpp. Added at the end of the serialization
chain (inside if(file.available())) for backwards compatibility with
existing saved files — old files default to auto_lock=0 (disabled).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Previously each LPP sensor field called querySensors() separately.
Now a single querySensors() call fills a shared buffer used by both fields.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Previously every key press while locked reset _lock_wake_until to now+5s,
so multiple presses (or spurious button events) kept extending the window.
Now the 5s timer is set only when the display first wakes from dark.
The unlock sequence still extends the window on each Back+Enter step.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds ð/Ð (eth), þ/Þ (thorn) for Icelandic, and ţ/Ţ (t with cedilla)
for legacy-encoded Romanian text.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds háček and other Czech/Slovak characters (č š ž ř ě ů ď ť ň ľ ĺ ŕ)
to the UTF-8 transliteration table so they display as ASCII letters
instead of █ blocks.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Turn display on at first Back+Enter press so hints are visible even when screen was dark
- Extend _lock_wake_until on every sequence step to prevent screen blanking mid-press
- Set _next_refresh=0 on every Enter press (not just on completion) for immediate hint redraw
- Add _lock_seq_used flag to suppress the Back CLICK that fires on release after unlock
- Block triple-Back (buzzer toggle) when screen is locked
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Long press detection on back_btn was unreliable — the release generated
a spurious CLICK that cancelled the sequence. Now the Enter click handler
checks back_btn.isPressed() directly: holding Back and clicking Enter 3×
within 3 seconds locks/unlocks the screen.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reuses dashboard_fields[0] and [1] from NodePrefs — left-aligned and
right-aligned in one row under the clock, no labels to save space.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Long press Back starts lock sequence; 3 Enter presses within 3s toggle lock
- Locked screen wakes for 5 seconds on any key, showing clock and unlock hint
- Incoming messages do not wake the display while locked
- Auto Lock setting in Display section: locks automatically when screen turns off
- Lock state persisted in UITask; NodePrefs gains auto_lock flag
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Static screens (SettingsScreen, BotScreen, FullscreenMsgView, message
list, contact picker) were re-rendering every 300ms with no visible
benefit. New messages still trigger immediate refresh via newMsg() →
_next_refresh=100, so responsiveness is unchanged. Reduces unnecessary
SPI transfers and CPU wakeups ~6x on idle static screens.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Text lines fill the full display width, causing the last chars to bleed
into the scroll arrow area. Draw a DARK fillRect behind each arrow before
rendering it, so the arrow appears on a clean black background without
truncating the text width.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Single shared _bot_last_reply_ms caused a DM reply to block the
channel bot for 10s and vice versa. Split into _bot_last_dm_reply_ms
and _bot_last_ch_reply_ms so each cooldown is independent.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- with_sender[160] could hold only ~160 chars but node_name(32) +
expanded(200) needs up to 234; snprintf would silently truncate
the UI display entry. Increased to 240.
- FS_LINE_H was 9 but Adafruit 5x7 font line height is 8, wasting
1px per line and showing 5 lines instead of 6.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Channel messages have the format "sender_name: body". The trigger was
being searched across the whole string, so a nick containing the trigger
word would fire a reply even with an unrelated message. Now the match
skips past the ": " separator and only checks the message body.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Loading... screen was always shown at full brightness because prefs
are not yet loaded at that point. Apply setBrightness() in the first
common code path after the_mesh.begin() loads prefs, so at least the
tail of the loading screen and the entire splash screen respect the
saved brightness level.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Size 2 rendered text wider than display width. Switched to size 1
and adjusted y-positions to keep both lines visible.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Raw UTF-8 message body was passed directly to display.print(), rendering
Polish and other accented chars as garbage on the Adafruit font.
Transliterating before wrapLines also fixes byte-count wrapping for
multi-byte UTF-8 characters.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Names printed via drawTextEllipsized (contacts, senders) bypassed
translateUTF8ToBlocks, causing raw UTF-8 bytes to render as garbage
on the Adafruit font. Now transliteration happens inside the method.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces the block-character fallback with proper transliteration for
Polish (ą→a, ć→c, ę→e, ł→l, ń→n, ó→o, ś→s, ź→z, ż→z), German (ä ö ü ß),
and common French/Spanish/Portuguese accents. Unknown codepoints fall back
to '?' instead of █.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Splash screen bar changes from "Plus for Wio" to "Plus 1.4 for Wio"
by extracting the suffix after "plus." from FIRMWARE_VERSION.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Expand README: ringtone editor now documents two melody slots, full
note spec, and melody assignment to DM/channel notifications; settings
section lists DM Melody and Channel Melody options; context menu
description updated with melody override detail
- Rename quick reply template labels from M1-M10 to Q1-Q10 to avoid
ambiguity with melody slot identifiers M1/M2
- Increase DM message history buffer from 32 to 64 entries
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Previously empty slots used drawRect and filled slots used fillRect,
so at max value (e.g. volume=4) no drawRect was called and no slot
borders were visible when selected (inverted colors). Brightness at
default (2/5) always had visible outlines, making the two bars look
inconsistent.
Now drawRect is called for every slot, with fillRect(+1,+1,w-2,h-2)
on top for filled ones. All 5 slots are always visually distinct.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- DataStore: validate ringtone2_len <= 32 after loading from flash
(same guard as ringtone_len on line 252; we introduced this field
but forgot the validation)
- UITask: fix shutdown buzzer timeout to conventional unsigned form
(millis() - start) < timeout to avoid unsigned underflow if called
within first 2.5s of boot
- UITask: guard _last_notif_ch_idx < 64 before 1ULL shift in notify()
(defensive; MAX_GROUP_CHANNELS=40 so currently unreachable, but
prevents UB if the value is ever unexpectedly out of range)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
##*- strips to the last hyphen, so wio-tracker-v1.15-plus.1.3 yielded
"plus.1.3" instead of "v1.15-plus.1.3". Switch to #*-v (shortest prefix
ending with -v) which preserves hyphens inside the version string.
Also remove the -Plus suffix appended in build_wio_tracker_l1_firmwares()
since the version scheme already encodes "plus" in the tag/version string,
making the suffix redundant and producing doubled output like "plus.1.3-Plus".
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
tone() dynamically computes seq_refresh so the DMA repeats 50% duty for
~13-30ms per note before re-reading its buffer — volume cannot take effect
until that delay passes, producing a staircase artifact.
Replace tone()/NonBlockingRtttl with a custom RTTTL parser that drives
NRF_PWM2 directly using REFRESH=0. DMA now re-reads _duty_buf every
PWM period so:
- Duty is set before SEQSTART fires → no initial full-volume burst
- applyVolume() writes to _duty_buf and takes effect within one period (<2.3ms at A4)
- setVolume() during playback adjusts loudness immediately and smoothly
Non-nRF52 platforms continue to use NonBlockingRtttl + analogWrite.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add second ringtone slot (ringtone2_*) to NodePrefs and DataStore.
Add per-channel and per-DM melody assignment (built-in / melody 1 / 2)
stored in NodePrefs bitmasks and DmMelodyEntry table.
Settings screen exposes DM/CH sound items; RingtoneEditorScreen supports
switching between slots. notify() uses buildMelodyFromPrefs() to select
the correct RTTTL string per contact.
Remove broken nRF52 volume control from buzzer.cpp: tone() uses
NRF_PWM2 with DECODER.MODE=Auto so TASKS_NEXTSTEP has no effect and
duty cannot be changed before the first DMA read without patching the
Arduino core. applyVolume() is now a no-op on nRF52.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Swap left/right navigation in fullscreen view: left=newer, right=older
- Update arrow indicators to match new direction
- Remove # prefix from channel name in message and compose view titles
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Move "A" (auto-advert) indicator left of BT "B" in status bar
- Ellipsize node name to fit available width instead of overflowing
- Shrink A and B background rectangles by 1px right, 2px bottom
- Change A blink to 2s on / 2s off at 1000ms refresh rate
- Auto-advert sends GPS position directly via createSelfAdvert/sendZeroHop
- Align Settings and Tools home page titles to y=22, same as Messages
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BT indicator and mute icon were at y=1 (1px below text baseline).
Battery icon height reduced 10→8px to match text height.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Changed ~ to " A" (space + capital A, no inverted background)
- Blink: on 500ms / off 1500ms (once per 2s)
- Home screen refresh rate drops to 500ms when auto-advert is active
so the blink is actually visible
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Blinks at 4Hz (250ms toggle) with inverted background so it's clearly
visible without being distracting.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace getAvailableLPPTypes() (hardware-detected) with a live querySensors()
call so only placeholders for sensors currently returning values appear in
the picker.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Scan does not discover others — it announces our own presence.
Updated labels: "Scan for nodes"→"Send my advert", "SCANNING..."→"ADVERTISING...", "[M]=Scan"→"[M]=Advert".
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Detail view now shows "Seen: Xs/Xm/Xh ago" using ContactInfo.lastmod
- Periodic detail refresh exits back to list view if the contact is no
longer in the filtered list (e.g. removed from favourites)
- Rearranged detail layout to fit 6 rows within 64px display
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add "Fav" as first filter category (contacts with flags & 1)
- Show distance and bearing on separate lines in detail view
- Add cardinal direction to bearing: "Az: 245d (SW)"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Ping sent empty messages appearing in target's chat history, and RTT
measurement never worked for direct sendMessage() calls. Removed all
ping state machinery and registerExpectedAck(); detail view now shows
node info only (lat/lon/dist/bearing/type).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds configurable periodic 0-hop self-advert that includes GPS coordinates,
making the device's position visible in other nodes' Nearby Nodes screen.
Options: off / 1min / 2min / 5min / 10min / 30min / 1h.
Accessible via Tools → Auto-Advert. Timer runs in MyMesh::loop().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Direct sendMessage() calls bypass the BT serial handler that populates
expected_ack_table; add registerExpectedAck() to MyMesh and call it from
NearbyScreen so isAckPending() can actually track the outstanding ping.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove gps_lat/lon == 0 filter: screen now shows all contacts
reachable by radio; distance column shows ?GPS when coords unavailable
- Guard haversine: only compute distance when both own AND remote GPS
are valid (prevents bogus distance to 0 N 0 E)
- Fix sort: nodes without GPS (-1) sort to end instead of front
- Rename Chat filter label to Comp, type display to Companion
- Update empty list message to "No contacts found"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stale _ping_ack_seen=true from a previous ping attempt could cause an
immediate PING_OK (with wrong RTT) on the next ping if the new ACK entry
hadn't appeared in the table yet. Reset the flag everywhere _ping_state
is set to PING_IDLE.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Ping: add _ping_ack_seen flag; RTT is measured only after ACK entry
was first confirmed present in the table, preventing false 0ms when
isAckPending() returns false before the entry is registered
- NearbyScreen: replace unsupported degree symbol \xb0 with 'd'
in bearing format ("Dist:1.5km 45d")
- Clock page: hide page indicator dots (already hides node name/battery);
eliminates overlap with size-2 clock text drawn at y=0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
JakubandClaude Sonnet 4.6
