- Gallery: thumbnails 30 to a page, built only while the screen is still (a decode held the loop and a scroll read as a tap)
- segmented(): CLICK_TRIG, so a swipe starting on a screen's tabs doesn't switch them
- Settings > Device > Home apps removed (hold an app on Home instead)
- platformio.ini: a note that the L2 has no microphone on GPIO15 (verified on hardware)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MyMesh::sendPathDiscovery() shares the request with the app's
CMD_SEND_PATH_DISCOVERY_REQ and hands the reply (the way there and back)
to the UI; PathEditor keeps up to 4 distinct routes with how often each
came. L2: Find the route under Route; L1: Discover row in Path / trace.
Docs: Discover, message routes on the map, Ask status and discovery.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PacketFlow keeps them (each with up to 3 ways it came, contacts by key
prefix) once a frontend asks, in PSRAM; the map frames a replay that's off
screen. Back on the map closes a popup first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An arrow at the target on a round dial whose top is the way you're heading:
turn until it points up. It turns green and the ring doubles when you're
within 12 degrees. The text says how far to turn ("turn right 55") instead of
two bearings to subtract. Standing still there's no course: the arrow greys
out, the top is north and marked red, and the text keeps the bearing.
sim_nav_target() sets a target from the simulator page.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Bluetooth + USB (+ WiFi/Ethernet/UART per build) in one interface_manager,
as upstream; frames go to every enabled link, USB is read while BT is
connected. DUAL_SERIAL now means ENABLE_USB_INTERFACE.
- WiFi interface with upstream's wifi_* prefs and set/get wifi.* CLI.
- isClientConnected moved into ArduinoSerialInterface (DTR on nRF52 and
ESP32 native CDC).
- UI uses isBluetoothEnabled/enableBluetooth/disableBluetooth; turning BT
off leaves USB and the other links on.
- DualSerialInterface removed.
- Sim build gains DynamicConfigSerializer.cpp (broken since bd64c203).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
L2: a Flashlight app on Home (a lightbulb icon added to the fonts): a
white layer over everything, the backlight at 100 %, no auto-off; a tap,
the side or the top button puts it away and the brightness back.
L1: Tools > System > Flashlight, the whole OLED lit at full contrast
until a key. Not on e-ink.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Map tools > Layers > Map picks what the map is drawn from:
- Topo: OpenTopoMap, as before.
- Light and Dark: Esri's grey canvases, no labels, up to z16.
- Satellite: Esri World Imagery.
- Esri Topo.
Each layer has its own folder for downloaded areas (/sdcard/maps-light,
-dark, -sat, -esritopo; Topo stays in /sdcard/maps) and its own live-tile
cache. Live-cache records carry the layer.
Esri serves JPEG: decoded with LVGL's tjpgd (LV_USE_TJPGD), whatever the
file name says. The layer is kept in NVS (mc_ui/layer); switching waits
while a download or a deletion runs in the current folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Every packet heard is drawn, by kind in fixed colours: advert, DM,
channel, request, ack, other, sent. One that can't be placed on the map
is a ring at your own position.
- A legend pill at the top counts each kind over the last minute.
- On a map without node markers, a flow brings its own nodes (a dot and
the name), fading with it.
- Copies of one packet (the same packet hash) share one fade, so a path
goes out as a whole, not segment by segment.
- 32 flows kept on ESP32 (12 on nRF).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WiFi starts and joins on internal RAM: ~42 KB the first time, ~25 KB after,
more for WPA. Free internal RAM had shrunk to ~20 KB after opening the map
(the tile decoder's 12 KB stack, the 32 KB I-cache, the DMA draw buffers,
UI statics), so a scan failed at once (esp_wifi_init: no memory) and a join
during a tile download timed out (AUTH_EXPIRE).
- ESP-IDF: CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY, and the esp_timer
task stack 8 -> 4 KB (it uses ~0.4 KB). Rebuild the framework libs:
pio run -e Wio_Tracker_L2_idf_libs.
- PSRAM_BSS (EXT_RAM_BSS_ATTR) on the UI's big statics: QR codes, map
state, charts, lists. .dram0.bss 115 -> 66 KB.
- The tile decoder's and fetcher's task stacks in PSRAM.
Free internal RAM, idle: 48 -> 105 KB; WiFi up: 57 KB, 29 KB at the
lowest while downloading tiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Density from less chrome instead of smaller rows (ROW_H stays 44):
- titled screens drop the status bar; the title bar (APPBAR_H) holds back,
the title, the screen's actions and the time/battery on a pill; the status
bar returns for Home, the map, typing, the quick panel and the lock
- one radius (RADIUS) for everything tapped: buttons, tabs, choices, chips
- tabs are all segmented at TAB_H in the body (GPS, Clock converted)
- Nodes: chips row + sort + status line become one toolbar row with
Show / Order choices; Messages' All/Favourites is the same choice
- nav map: the target bar only while there is a target; the pin opens one
"Places" popup; back from a map options page restores the map and Map
tools as left, without a jump
- node detail actions at the top of the scroll; Home tiles fill the page
- rowsFit() leaves growing labels to the flex (a screen title cut to one
letter after Messages' filter changed)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every packet heard runs from its origin through the repeaters with a
position to this device; a packet sent is a ring. ui-core/PacketFlow.h
resolves them (UiCore::flow, MyMesh logRx/logTx -> Listener). ui-lvgl
draws them on the map's marker layer and repaints only their area while
they move; ui-new draws the last minute on the Nodes map ("Flow" in its
options). Setting: Map options > On the map > Packet flow, CLI map.flow.
Off by default. Sim-checked only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Core: PathEditor results are links (node k hearing k-1 and back); toNode()
off traces only the repeaters (a companion answers only with repeat on);
probe() traces to each repeater in turn after no reply; failures carry a
reason; an empty list saves "direct". PingEngine takes over a slot left past
its timeout. A kept route: the dropped heard path isn't announced to the app
nor bumps lastmod; an app update keeps the flag only if it leaves the route.
Marker boxes sized for every dot and name (overflow).
ui-lvgl Route: one line per node with out / back dB coloured by quality, tap
a hop to move / remove, tap the node to include it, Keep in the header, Find
where beside a no-reply status. ui-new Path: To node / Find break rows,
result alerts, cursor kept on its action.
Channels: ui-new re-sorts the list on entering it, cursor on the same channel.
Docs: Path and trace, Channel order. Sim hooks: open route, add channel,
open messages.
Checked in the browser sim (L2 + ui-new peer + repeater); not on hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Core: PathEditor (UiCore::route) loads, edits, traces and saves the route to
a contact; MyMesh::sendTrace over an explicit route with per-hop SNRs,
setContactPath / setContactPinned. A route can be kept
(CONTACT_FLAG_ROUTE_PINNED, ContactInfo::flags bit 4): a path heard from the
node doesn't replace it and the last DM resend doesn't drop it.
ui-lvgl: Route screen (node detail), repeater picker by distance, picking
hops by tapping the nodes map (numbered badges, line, Undo / Done). The
map's markers are one drawn layer with hit-testing and name decluttering
instead of three objects per node.
ui-new: Path / trace view in the Nodes action menu; Add reuses the list
filtered to repeaters.
First cut: built for L2 LVGL, L1 OLED and L1 e-ink, tried on L2 only.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Nodes: telemetry permissions per contact, reset path, share nearby
(L1 options menu; L2 node card with "Can ask for" switches)
- Settings > Privacy: fixed position (typed in, from a waypoint, cleared)
and the Bluetooth PIN; Settings > System: factory reset, asked twice
- Companion CLI (CMD_RUN_CLI_COMMAND 66 / RESP_CODE_CLI_REPLY 29, as
upstream; FIRMWARE_VER_CODE 14): upstream's command names plus a key for
every schema setting (get / set / keys)
- Screenshots move to 0x7E; tools/screenshot.py falls back to 66 / 29
- Your contact as a QR code (meshcore://contact/add): Status > System on
ui-new, Settings > About on the L2; Nayuki's qrcodegen made header-only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nearby › Map (ui-new): the positioned nodes and you on one view, scaled
to fit, with north, a scale bar and the selected node's name and
distance; Left / Right picks a node, Up / Down zooms on it, Enter opens it.
- Clock tools › Calendar (ui-new): the month with today and the alarm's
days; a tight grid on small screens, Left / Right pages the months.
- L2 Settings: a Message banner switch (on / off) in place of ui-new's
three-way alert setting.
- Simulator: sim_nodes() puts eight positioned contacts around Kraków.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new's messagesInView() and ui-lvgl's threadInView() hold the
lit-and-unlocked test the viewing checks repeated; the keyboard's three
copies of the backspace call deleteBeforeCursor(). A stale comment on the
cursor-mode hint goes, onDisplayOn() sits after the view helpers it calls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A conversation left open under the lock screen or a dark display no longer
counts as read: the counters and the lock screen's tally go up, and on
waking (L2: on unlocking) the conversation reopens on its first unread
under the "New" line, a typed draft kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both UIs: a channel, DM or room with unread messages opens on the oldest of
them (MessageHistory::firstUnreadChannel / firstUnreadDm, own messages not
counted), a "New" line above it, so it reads down to the newest. Nothing
unread: the newest, as before.
L1: the first unread is selected and scrolled up top with the line in view;
the channel's unread count now counts down as you read towards the newest.
L2: the page holding it, scrolled to the line; an incoming message scrolls
down only when the list is already at its end. Sim hooks: sim_unread (L1),
sim_open("unread") (L2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A pending DM shows a dot per send, as on the L1. The thread is read from
the SD archive, which a resend never updated: it does now, and the
thread's signature and patch state count the attempt.
- Nearby redraws when a node goes live, changes type or the units change;
the scan popup when a name or the remote SNR arrives.
- The user LED is active high: it was lit all the time and went dark
while transmitting.
- Sim hooks "dm" and "send" for testing a DM thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The limit is what the send leaves of MAX_TEXT_LEN: a channel post carries
"<node name>: ", a direct message resent more than three times keeps two
bytes spare, and placeholders count as they expand (msgtext::limit/sentLen).
Bytes, not characters. The path and packet header sit outside the payload;
static_asserts keep a full message within the radio frame on the longest path.
From 40 bytes left the count shows: on the L2 as a tag on the field's top
edge, on OLED/e-ink at the right of the preview's last line with the text
wrapped short of it. Input stops at the limit; a send still over (a
placeholder grew) is held. Sim hooks to open a compose with text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-lvgl: navTextEntry()/TextEntry replace eight copies of popup + field +
keyboard wiring; one byte-capped insert callback instead of two.
- ui-new: drawHeadedBubble()/BubbleMark replace the duplicated DM and channel
bubble drawing in MessagesScreen.
- GpsSky::halt(): stopping the receiver ends an unfinished search but keeps
the first-fix time; keyboard cursor blink restarts after a key.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
The quick panel, as a phone's: pulled down from the status bar (or a tap
on it). Bluetooth, WiFi, GPS, sound, trail and live share switch at a
tap; Advert opens the advert popup (moved here from the Nodes header);
Lock locks the screen; a brightness slider. Holding a tile opens its
settings. Lock and sun glyphs added to the fonts.
Fixes from rc1 testing on the L2:
- GPS status icon: none when GPS is off (the module kept its last fix
valid, so it stayed green); grey on, green with a fix. ensureGps()
turns GPS on before trusting that stale fix.
- Screen wake: the panel wakes dark, a frame is drawn, then the
backlight fades in -- no white flash. Off fades out first.
- Power off / flat battery: the chip wakes every 30 s to look for USB
power and starts when plugged in (it slept with no wake source before,
until the reset button). Plugged in when switched off: stays off until
re-plugged.
- Message ages in a conversation refresh every 2 s, as on ui-new; the
message popup keeps its age, repeaters heard and delivery up to date.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Node detail: a card with a compass rose and the hop chain over the info;
the bar keeps Message / Admin / Add, Ping and Navigate, the rest goes to a
"More" group under the info (favourite toggled in place, delete by a second
tap). Nodes: an arrow by each distance. A trail's height profile in Map
tools and a saved trail's popup. Diagnostics > History: battery, noise,
SNR and traffic charts. Clock > Calendar: today, the weekend and alarm days.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Battery curve: NodePrefs batt_curve_mv[11] (voltage at 0..100 %, all
zeros = built-in LiPo curve, sentinel 0xC0DE0032). ui-core/Battery.h
uses it for every percentage. L1: Settings > System > Batt curve list
(Left/Right 10 mV, Reset); L2: Settings > Power > Battery curve chart
with draggable points and a line at the cell's voltage.
- L2: the Nodes map is the full navigation map plus the nodes, Back
returns to Nodes; the favourite button is lit while it is one; pinning
to the Home dial uses a thumbtack (fonts regenerated); minimap dots
follow the accent; arranging tiles shows where they land while dragging;
emoji row in Diagnostics > Font.
- Sim hooks: sim_open nodesmap / accent@N / homeedit / battcurve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New message, Nodes (and its Scan popup), Admin and Messages show their
items through one virtual list: a screenful of rows, handed to the next
item as one scrolls out, the scroll extent from the items' heights. 256
contacts: 522 objects and ~950 ms of filling in (frames up to 96 ms)
before, 19 objects at once now; a scrolled frame 28.5 -> 11.7 ms. Nodes
257 -> 49 objects. A new message rewrites Messages' rows in place
(46 -> 20 ms) instead of building the screen again; it's rebuilt only
when "Read all" comes or goes. A held row keeps what it shows until let
go. Perf tools: -D PERF_LISTS, -D PERF_LIST_MUL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A popup over a still screen is frozen and dimmed as it opens, so the
panel's rise redraws only the panel: 6-8 frames of 19-25 ms instead of
3-4 of 45-65 ms. Picker options are one label each (time zone list
97 -> 52 ms to build). The bottom popup no longer animates a dim of 0.
Repeater updates its hint in place (130 ms rebuild gone); Auto power,
Imperial units and Relay on rebuild the screen after the knob has
moved (rebuildSoon). -D PERF_CONTROLS times every control on the
settings screens.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A 404/503 answer (OpenTopoMap renders on demand) went to an immediate
2 s retry and counted as network loss, so each tile then waited up to
60 s. Answered errors now go straight to the retry list; long pauses
only when there is no answer at all. Three retry rounds (20/60/120 s)
for the tiles still missing, transfers cut after 30 s, failures logged
on serial.
Download popup tidied: title + floating close, percentage instead of
tile counts (also on the map pill), no dead zoom row, no finish toast
after Stop or while the popup shows the result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The list fill becomes a small job queue (fill/then/fillStart, fillTick with a
25 ms budget per pass). Settings pages build section by section in
schemaRows, with the trailing extras (melodies, prune, quick messages) queued
after them so the order stays; Radio and Repeater build by group, Admin's
repeater pick like the contact list, Diag's Live tab by section. Rebuilds
that restore the scroll flush the queue first. Screens went from 220-360 ms
to 80-175 ms (build + first frame).
Diag's crash line read the core dump in flash every second (~44 ms each);
it is read once now. The perf run times every page and dismisses the USB
popup, which had covered all earlier measurements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A widget costs ~1 ms on the L2, so Nodes with 48 rows held the screen for
~600 ms and a full contact list for over a second. fillStart() builds the
first screenful at once and fillTick() adds the rest ~25 ms a pass.
- Nodes: 6 rows first; the 2 s refresh rewrites built rows in place
- New message: contacts filled the same way
- Settings: a group at a time (all at once when coming back scrolled)
- Nodes 671 -> ~200 ms, Settings 376 -> ~190 ms longest UI stall
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- TileCache: request() hands z/x/y to a task on core 0, which renders into
a spare buffer; poll() swaps it into the LRU slot (stale results dropped
after drop()/invalidate()); the sim runs the job at once
- MapScreen / Home map place finished tiles as they arrive; the longest
UI stall with the map opening goes from ~340 to ~170 ms
- LVGL allocates from the PSRAM heap (lv_mem_psram.h), safe from both
tasks; LVGL's own pool is gone
- lv_conf: notes why LV_OS_FREERTOS with two draw units stays off
(measured slower: drawing is bound by PSRAM bandwidth)
- UI_PERF_TEST: the map (tile read/decode, pan, redraw), build time and
the longest loop pass per screen
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Trail on the L2: 32768 points every 5 m, no simplification, no point
spacing setting; copied to the card every minute and restored at power-on.
The line keeps up with the position dot (incremental sync, pending point).
Map: a tap's finger jitter no longer turns follow off; the GPS button
shows when the map follows. The trail is drawn as one polyline with
breaks and off-view chunks skipped (an lv_line queued a draw task per
point).
Fewer rebuilds: conversation bubbles patched (new messages, delivery
marks), home mini-map dots reused, Nearby rows rewritten in place,
history read in runs and each file opened once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- CMD_GET_SCREENSHOT on colour screens: display type 2 (RGB565 LE),
32-bit payload size; ui-lvgl captureFrame() shared with the SD BMP
- ENABLE_SCREENSHOT in the L2 build; tools/screenshot.py decodes type 2
- docs and READMEs point to solo.marekzegarek.com/#pc-tools
- USB popup: "Keep card" instead of "Charge only" (only the card is lent;
charging and USB serial work either way)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- CPU at 80 MHz with the screen on after 2 s without touch or animation;
a touch restores the full clock before its frame is drawn
- setText(): periodic refreshes no longer redraw unchanged labels
(status bar, Home, lock, Diag, GPS, compass, clock, map, nav, nearby)
- map markers kept across the 3 s rebuild when unchanged
- app connected: the loop blocks until a BLE frame arrives
(serialFrameArrived / hasPendingFrames) instead of polling every 2 ms
- PSRAM: boot frame sprite and the HTTP response buffer released
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Short pages by feature (getting started, messages, contacts, navigation,
tools, settings, lock, hardware) instead of one page per OLED screen, with
Wio Tracker L2 differences as notes; facts checked against the code
(keyboard scripts vs. hold-for-accents, {batt}/{dist}, L2 limits and
settings layout). Developer guides and build flags under docs/solo/developer.
Old docs/solo_features and its ~50 screenshots removed; a hero banner and
three simulator screenshots added; links updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Working plans (docs/development, docs/design redesign notes) removed; the
two developer guides moved to docs/developer/. README cut to devices,
flashing, links and building (Wio Tracker L2 added); its feature list and
doc tables moved to docs/solo_features/README.md. RELEASE.md describes the
Solo release flow. Upstream's GitHub Pages workflow (docs.meshcore.io)
dropped, CLAUDE.md untracked, Buy Me a Coffee back in FUNDING.yml.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The contributor's feature -- a PIN asked before the screen unlocks, on
boot, and when the magnet cover opens, stored as a salted SHA-256 -- on
top of this branch, with:
- ui-core/ScreenLock.h: set / check / isSet and the tries limit, shared by
L1 and L2. isSet looks at every byte (the PR tested only the first, so one
PIN in 256 silently disabled the lock). 5 misses pause entry for 30 s.
- NodePrefs: the fields at the tail after quiet hours, sentinel 0xC0DE0031,
sizeof 2880; an older file's bytes there are cleared. A sentinel bump no
longer resets display_brightness_pct from a file that already has it.
- DataStore: no AGPL header (the project is MIT), no whitespace churn.
- Keyboard: the number pad is a widget flag (pin_mode) with a prompt in the
preview ("New PIN", "Again", "PIN"), not keyboard_type = 2 written into the
prefs and restored after.
- L1 Settings: "Lock PIN" right after the schema's "Lock screen" row, typed
twice, at least 4 characters, saved at once (a power-off right after
setting it kept no PIN). Home is told about a boot-time lock once it
exists (also fixes booting with the cover closed).
- L2: the screen PIN moves from plain text in NVS to the same hash in
NodePrefs; the old one is migrated on first boot and removed. The pad
unlocks as soon as the hash matches from 4 digits on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- L1's MessagesScreen sends through UiCore::sendDirectText / sendChannelText
(its own copy of send + file + ACK tracking gone).
- ui-core/Telemetry.h: the dashboard fields (numbers, names, formats) and
sensor readings as text, each frontend passing its Style; L2 Home, L1's
clock page, lock screen, sensors page and GPS altitude use it.
- L2: the side button held in the first 8 s is the CLI rescue, as on L1.
- L1's repeater radio goes through rptctl.
- L1 Settings are built from SettingsSchema: short labels for small
screens, SCHEMA_* placeholders expand to the schema's sections, one
generic row (switch ON/OFF, bars for brightness / volume). 20 hand-written
rows and their tables gone; L1 implements applyDisplayPrefs /
applySoundPrefs. settings::text / step / indexOf shared with L2.
- Schema: auto-off gains 5 s; the advert sound scope reads "Direct".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dead code gone: anim::fadeHide, radioctl::presetCount, the L2 board's
setSdPower / setGrovePower / expanderOK (awRead, gnssReset now private).
- buttonBar() / barButton() replace 7 copies of the popup button row.
- confirmBody(): one red-button confirm for reboot / power off, reset
counters, admin commands, preset and scope delete.
- tapConfirmed(): the 11 "tap again" buttons share one mechanism, 3 s
everywhere, the label restored when left alone.
- noteLabel() for ~30 wrapped notes.
- localTm() in NodePrefs.h and one MONTHS table: lvgl, MsgExpand, the L1
clock and lock screen.
- The sim keeps UI settings in an in-memory nvs::, so one set of load /
save helpers serves both.
- Asleep, the loop wakes every 50 ms (the button / touch poll), not 20.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Noise tab held the L2's interference hunt: parts of the board off one
by one, a slow cycle for a second radio, a spike hunt and three sweeps
(~90 s, L2 only). It is now one Measure: the noise floor on the mesh
frequency (median and 10th percentile of 5 s) and a +-1.1 MHz sweep round
it, ~12 s, with a short legend for reading it. Works wherever the variant
defines the radio.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Map tools: TRAIL, LIVE SHARE and ARRIVAL ALERT each with their own options
page (that section of Map options; back returns to Map tools), the arrival
alert switch where its state is shown, OFFLINE MAPS (Map areas, Live
tiles; the separate Download an area is gone -- a running or unfinished
download shows at the top of Map areas) and LAYERS.
Map areas: picking one frames it on the map above a small sheet (no Show
button, the map above isn't dimmed); closing the sheet, however it's
closed, puts the map back where it was and drops the outline -- it used
to stay on the map. New popup kind POP_BOTTOM.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hold an app on Home (or Settings > Home apps) to arrange them: every app
is shown, hidden ones dimmed with a +; a drag drops the app into the slot
under the finger, held at a screen edge it goes to that page; a tap hides
or shows it. Settings stays shown. The order is kept in NVS (letters per
app, lower case = hidden), saved on Done or on leaving Home.
Roadmap: note the speaker-knock experiment (DAC ramp didn't help).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- USB through TinyUSB (ARDUINO_USB_MODE=0) instead of USB-Serial/JTAG: the
serial port stays, and plugged into a computer (enumerated, the bus not
suspended -- on battery an unplug only shows as a suspend) the device asks
"Charge only / USB drive". As a drive the firmware lets go of the card and
the computer gets its sectors; ejected or unplugged, the device restarts.
- Incoming messages: a banner slides down from under the status bar (icon,
sender or channel, two lines of the text from history); a tap opens the
conversation (not while locked), a swipe up dismisses it, not shown for
the conversation already open. Toasts moved up there too, under the banner
when both are up; the ones only echoing a switch or a choice are gone.
- Storage > Format card: a popup saying what goes, then Format tapped twice;
one FAT32 volume over the whole card (readable or not), then a restart.
- A deliberate restart shows a full "Restarting..." screen with the reason
instead of the screen just freezing.
- The screenshot flash is a thin frame round the edges: a full-screen fade
redrew all 320x240 each step and tore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Settings > WiFi keeps up to 8 networks (NVS "s0".."s7" / "p0".."p7"; the
single one older builds saved moves over). A tap loads one to change its
password, Forget asks with a second tap, a scan marks the known ones.
- Map downloads, live tiles and updates join the strongest saved network in
range (a short scan first when more than one is saved), else the newest
one -- which also covers a hidden network.
- Save joins the network once: "password OK", turned away (forgotten again,
the form keeps it to fix) or not in range (kept, checked later).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Side button held + top button saves the screen, popups and toasts included,
to /sdcard/screenshots/scr_NNNN.bmp (24-bit BMP). The flush callbacks copy
one forced full re-render into a PSRAM buffer. A white flash and a toast
confirm it. The side button's mute now fires on release, so holding it a
little long before the top button doesn't also mute. In the sim, the page's
Screenshot button downloads the file.
- The lock screen goes dark after 30 s even with auto-off at Never (a boot
PIN, a pocket wake-up, a message), and sooner if auto-off is shorter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JakubandClaude Opus 5.5
MarekZegare4andClaude Sonnet 5.5