Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Turn Nearby Nodes into the single node hub and make its navigation legible.
Node management (no phone app needed):
- MyMesh gains addDiscoveredContact() and deleteContactByKey(); CMD_REMOVE_CONTACT
now reuses deleteContactByKey() (one delete path: contact + blob + room password
+ UI cleanup + lazy write).
- Action menu (Hold Enter) gains Add contact (a new scanned node), Favourite /
Unfavourite (pin to the first free dial slot), and Delete contact (confirm first,
defaults to Cancel). Actions are offered contextually per row.
- A pinned contact shows a star in the list row, next to any live-share diamond.
Absorb passively-heard adverts: refreshStored() folds getRecentlyHeard() nodes that
aren't already listed as name+age rows (All filter only — AdvertPath has no type),
so "recently heard" no longer needs its own page.
Legible filter navigation: the filter (LEFT/RIGHT) is now a visible tab strip — the
active filter is a centred inverted pill, neighbours fan out and wrap around
(circular, first<->last). Only whole tabs are drawn so labels never wrap a line.
Rename Tools > "Nearby Nodes" to "Nodes".
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Surfaces the Alarm/Timer/Stopwatch screen (previously reachable only
from the home Clock page) as a System tool, via the existing
UITask::gotoClockTools() and ICON_ALARM.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every drawList/AccordionList row opened with the same hand-written
display.drawSelectionRow(0, y-1, width-reserve, lineStep-1, sel) line —
14 copies of the same geometry and magic offsets. Add a drawRowSelection(d,
y, sel, reserve) helper in icons.h next to drawList and route the canonical
sites through it (Bot/LiveShare/Locator/Repeater/Settings/Tools/Nearby/
QuickMsg/Waypoints).
Rows that intentionally differ (full-width DashboardConfig/QuickMsg, the
keyboard/ringtone grids) keep their explicit drawSelectionRow() call — the
helper is opt-in rather than baked into drawList, so legitimate variants
aren't forced into one geometry. Framework doc updated to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the ad-hoc enter()/markClean() entry methods (which lived outside
the UIScreen interface and were invoked via casts from each gotoX) with a
virtual onShow() lifecycle hook called centrally by setCurrScreen().
This removes the "forgot to call enter() in a new navigator" footgun and
the unchecked cast smell: 12 navigators collapse to one-line
setCurrScreen(x) calls, and override enforces signature match. Two entries
that carry a parameter/variant keep an explicit typed call after
setCurrScreen(): RingtoneEditor::selectSlot(slot) and TrailScreen::showMapView().
Behaviour-preserving: only screens that previously had enter() get an
onShow() override; Splash/Home/QuickMsg/Diag keep no reset as before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Squash merge of feat/location-beacon-alerts-autopause (v1.21).
Features:
- Live Location Sharing — broadcast position as movement-gated [LOC]
messages to a channel or contact; live shares show as map pins with
distance/bearing in Nearby Nodes and a status-bar indicator. [LOC] is
parsed in DMs, channel messages and room messages; DM shares name the
sender.
- Locator (geofence) — arm a geofence around a saved waypoint or a person
(live [LOC] or last-known position), alert on arrive/leave or near/far,
with an optional homing beeper (gated to arrive/both modes). Arm from
Tools > Locator, Nearby Nodes, or Waypoints; target picker lists
favourites first, clearable via a "None" entry. Active target is drawn
as a flag on the map.
- One active target shared across Locator / Navigate / Map via a single
resolver (resolvePersonPos / activeTargetPos) that prefers a live
[LOC] share over the last-advertised GPS fix.
- Follow live contacts — Navigate to a live-sharing contact follows them
as they move and adds an ETA line; quick-share your own position from
the Map.
- Map & status-bar upgrades — home mini-map gets a north marker, scale
tick, and a connected trail line (was disconnected dots); status line
shows tracked-node count, an arrow + distance to the active Locator/Nav
target (falling back to the nearest live-tracked contact); GPS fix icon
in the top status bar, shown only on GPS boards with GPS enabled.
- Trail auto-pause — recording freezes on stops (banking elapsed time,
breaking the map line across the idle gap) and resumes on movement
without ending the session.
- Streaming trail simplification — GPS points are simplified in-stream
via a fixed-corridor (Reumann-Witkam) pass tuned for fidelity: straight
runs collapse to their endpoints, curves stay bounded to the Min-dist
tolerance, so the 512-point buffer covers a far longer route than a
flat point budget would suggest.
- Collapsible Tools (Location / Comms / System sections, fold-in-place
like Settings) and page-indicator icons on the home carousel.
- Waypoint coordinate editor — add a waypoint by scroll-editing lat/lon
digit by digit.
Fixes:
- Critical: low-heap hang and contact loss on RAM-tight builds. Halved
message-history scrollback rings (recovering ~14 KB free heap) and
made contacts/channels/prefs persistence atomic (temp file + rename),
so an interrupted save can no longer corrupt or wipe the store.
- Serial.write() bounded so a stalled USB host can't hang the device.
- Nearby Nodes: live [LOC] senders respect the type filter, sort by
shared position, and the list refreshes so live shares bubble up.
- Map: live contacts are labelled before waypoints.
- GPS status icon hidden when GPS is off in Settings.
- Splash screen no longer truncates a pre-release tag's own dash (e.g.
v1.21-rc1) when stripping the build's commit-hash suffix.
- Null-guarded the Locator target picker; clamped loc-share channel
index on load.
Under the hood:
- -Os size optimisation on the e-ink and GAT562 30S solo envs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings > Radio gains a repeater toggle, 16 community-suggested radio
presets plus manual Freq/SF/BW/CR tuning (digit-by-digit Freq editor),
4 persisted user preset slots, and the packet pool bumped 16->32 so
queued retransmits stop starving incoming-packet allocation while
relaying.
Four opt-in politeness knobs (skip-advert, max-hops, yield, min-SNR),
all flood-only and off by default, plus overhear suppression that
cancels a queued retransmit if a peer relays the same packet first.
Adaptive Power Control is suppressed while relaying (pins TX power to
the ceiling) and duty-cycle RX is forced off, since a repeater needs
to hear and relay at consistent power.
A dedicated Tools > Repeater screen consolidates the toggle, the
politeness knobs, and live forwarding stats, plus an optional "Custom"
radio profile — a dedicated frequency/SF/BW/CR for relaying, separate
from the companion's own network, band-matched to the companion
frequency by default and used everywhere a radio change can happen
(boot, on-device toggle, app-driven CMD_SET_RADIO_PARAMS, Settings
radio edits) so the device never silently falls back to the wrong
params mid-relay.
Diagnostics gains the actually-forwarded packet count, real heap-free
via mallinfo(), a reset-counters popup, and hardened loop-detect
bounds. Also: a frequency-floor fix and a float-equality preset-match
fix in the repeater profile logic, deduped BW-table/valCol/profile-
seeding helpers shared between Settings and the Repeater screen, and
a build.sh fix tolerating control characters in `pio project config`'s
JSON dump.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Shows packet counts by category (RX/TX), radio noise floor/RSSI/SNR,
packet-pool free count and outbound queue length, uptime, and heap/stack
headroom on a single scrollable screen.
Adds generic per-payload-type RX/TX counters to Dispatcher (mesh layer),
plus pool-free/queue-length getters, and a new DeviceDiag helper for
nRF52 heap (linker-symbol + sbrk) and stack (FreeRTOS high-water-mark)
stats — the only platform needed for the 3 in-scope boards (Wio Tracker
L1 OLED/Eink, GAT562 30S), all nRF52840.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Trail map dots/diamonds/cross/start markers and the north indicator were
drawn as raw unscaled pixels, so they shrank to near-invisible specks on
landscape e-ink's larger font scale; they now route through the mini-icon
framework (icons.h) like the rest of the UI, and the grid intersection dots
scale with it too. The keyboard's preview/grid separator had the same bug
(hardcoded 1px) and now uses display.sepH().
Also makes UP/DOWN (and the keyboard's LEFT/RIGHT/UP/DOWN) wrap top<->bottom
across every list, menu and form selector, matching the behavior PopupMenu
already had.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- drawList(): scrollable list skeleton (visible window, keep-sel-in-view,
scroll-column reserve, per-row callback, indicator). Migrate Tools, Bot,
Nearby, Waypoints list and the three QuickMsg lists onto it; centralises the
scroll-clamp/reserve/indicator that each had open-coded (and inconsistently).
- drawCenteredHeader(): centred title + separator, replacing the duplicated
two-liner across ~10 screens (incl. QuickMsg, which used width()/2 spacing and
was missed before); unifies the separator at headerH()-sepH().
- keyIsPrev()/keyIsNext() in UIScreen.h for the LEFT||PREV / RIGHT||NEXT idiom;
applied to 6 screens, behaviour-preserving. Cancel/context-menu stay
per-screen (they mean different things on different screens).
- rotLabel() dedups the 0/90/180/270 array in Settings.
- Unify selection-row height to lineStep()-1 (Tools/Bot matched the rest).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the text ^/v scroll arrows with a font-scaling indicator drawn in
icons.h: a proportional thumb between fixed up/down triangle mini-icon caps.
drawScrollIndicator() lives in a ~5px right-edge column and scales via
miniIconScale (1x OLED, 2x landscape e-ink).
- Mini-icons: ICON_SCROLL_UP/DOWN; miniIconDrawTop (exact placement) and
miniIconDrawHalo (shape-hugging 1px DARK halo, clip_top to spare the header
separator) so caps stay visible on the LIGHT selection bar without a box.
- Thumb is 3*s wide so it centres on the triangle column; caps are static end
markers (always drawn) so neither vanishes at the extremes.
- scrollIndicatorReserve(): right-edge gutter (0 when the list fits). Content,
the selection bar and the message-history bubbles are all narrowed by it so
nothing renders under the scrollbar. Portrait e-ink wrap width subtracts the
reserve in both the box-height pass and render so wrapped text can't spill.
- Drop the redundant ">" selection marker (the highlight bar already shows
selection) and shift rows to x=2, reclaiming left-edge space.
- Wire the indicator into every scrollable list (Bot, Settings, Nearby, Tools,
Trail, QuickMsg lists + DM/channel history) and add one to WaypointsView,
which scrolled with no indicator before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pull repeated UI idioms into DisplayDriver and remove duplicated logic:
- DisplayDriver: add drawScrollArrows() and drawInvertedHeader(); replaces 11
copy-pasted scroll-arrow blocks across 5 screens and 3 inverted title-bar
blocks (NearbyScreen x2, NavView). Standardises the detail-view separator.
- useImperial(): single source on UITask; NearbyScreen/TrailScreen delegate
instead of each re-reading NodePrefs.units_imperial.
- NearbyScreen: extract saveSelectedWaypoint() (two identical blocks -> one);
drop the redundant local label buffer (WaypointStore truncates).
- UITask::shutdown(): power GPS off through LocationProvider::stop() instead of
poking PIN_GPS_EN directly — centralises enable/reset-pin + active-level logic.
Net -58 lines. Verified: GAT562 (SSD1306) and WioTrackerL1Eink (GxEPD) solo
builds compile clean.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The Tools menu rendered all items from listStart() with no scroll, so the
6th entry (Compass) fell off the bottom on the OLED's short panel and was
unreachable. Add a scroll offset that keeps the selection in view, with
the usual ^/v indicators.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tools › Compass shows the device's course over ground (from the GPS COG
ring — no magnetometer) as a rotating arrow in a ring with a north tick,
plus a large degrees + cardinal readout. "No GPS fix" without a fix;
"move to set heading" when stationary (course undefined). Reuses
UITask::currentCourse, so it works without recording a trail.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds Tools › Breadcrumb. Enter on the screen toggles tracking; while
active, UITask::loop samples GPS at the cadence chosen in settings
(default 1 min) and drops the point into a 256-entry RAM ring guarded
by a min-distance gate (default 25 m). A "G" indicator joins "A" in
the status bar with the same blink convention.
New storage:
- examples/companion_radio/Breadcrumb.h — BreadcrumbStore class
- 256 × 12 B = 3 KB RAM (survives auto-off, lost on reboot — explicit
flash-slot save comes in phase 4)
- Haversine min-delta gate, total distance, elapsed seconds, current
km/h, bounding-box helper
New screen:
- examples/companion_radio/ui-new/BreadcrumbScreen.h — Summary view
with Status, Points, Dist (m or km), Time (h:mm), Speed; Enter
toggles tracking, Esc returns to Tools
Schema bump 0xC0DE0002 → 0xC0DE0003 for two new NodePrefs bytes:
breadcrumb_interval_idx (1min default) and breadcrumb_min_delta_idx
(25m default). Older saves leave both at zero, which matches the new
defaults. DataStore::loadPrefsInt/savePrefs read/write the pair.
Logging on/off is a runtime flag inside BreadcrumbStore — not a
preference — so reboot returns to the off state cleanly; the user
will be able to persist a snapshot to a slot in phase 4.
Phase 2 (map view), 3 (point list), 4 (slot save/load, GPX export over
USB), and 5 (settings UI) follow incrementally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Eight screens repeated the same if/else block to invert the row
background for selected items. Add DisplayDriver::drawSelectionRow that
sets LIGHT, optionally fills the rect, and leaves the colour as DARK
when sel (so the caller's text renders inverted). 61 lines removed
across SettingsScreen, KeyboardWidget (cells + special row), ToolsScreen,
DashboardConfigScreen, BotScreen, RingtoneEditorScreen (note slots +
menu), NearbyScreen, QuickMsgScreen (4 list views).
Card-style rows (QuickMsg hist, NearbyScreen discover, RingtoneEditor
notes display) keep their original drawRect/partial-fill outline for
unselected — they don't match the simple-invert pattern.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds configurable periodic 0-hop self-advert that includes GPS coordinates,
making the device's position visible in other nodes' Nearby Nodes screen.
Options: off / 1min / 2min / 5min / 10min / 30min / 1h.
Accessible via Tools → Auto-Advert. Timer runs in MyMesh::loop().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add NearbyScreen: GPS contact list with haversine distance sort,
type filter (ALL/Chat/Rpt/Room/Snsr), detail view with ping (RTT via
ACK poll), node scan via advert(), context menu
- Add DashboardConfigScreen: configure up to 3 data fields on the clock
page (Battery, Temp, Humidity, Pressure, GPS, Altitude, Lux, CO2,
Contacts); entered via long-press ENTER on clock page
- Rework HP_CLOCK layout: full-screen clock (size 2 at y=0), date at
y=19, separator at y=28, three data field rows at y=31/41/51;
hide node name/battery indicator on clock page
- Persist dashboard_fields[3] in NodePrefs and DataStore
- Add isAckPending() to MyMesh for NearbyScreen ping detection
- Wire NearbyScreen into ToolsScreen and UITask
- Reduce NearbyScreen entry buffer from MAX_CONTACTS(100) to 32,
saving ~3.3 KB RAM
- Switch haversine/bearing math from double to float (sinf/cosf/atan2f),
eliminating double libm and saving ~5-10 KB flash
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move three custom screens out of UITask.cpp into their own .h files
(RingtoneEditorScreen.h, BotScreen.h, ToolsScreen.h) and replace them
with three #include lines. UITask.cpp now only contains screens that
overlap with upstream (SplashScreen, SettingsScreen, QuickMsgScreen,
HomeScreen), making future upstream merges easier — custom screens live
in files that upstream will never touch.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
