Squash merge of feat/location-beacon-alerts-autopause (v1.21).
Features:
- Live Location Sharing — broadcast position as movement-gated [LOC]
messages to a channel or contact; live shares show as map pins with
distance/bearing in Nearby Nodes and a status-bar indicator. [LOC] is
parsed in DMs, channel messages and room messages; DM shares name the
sender.
- Locator (geofence) — arm a geofence around a saved waypoint or a person
(live [LOC] or last-known position), alert on arrive/leave or near/far,
with an optional homing beeper (gated to arrive/both modes). Arm from
Tools > Locator, Nearby Nodes, or Waypoints; target picker lists
favourites first, clearable via a "None" entry. Active target is drawn
as a flag on the map.
- One active target shared across Locator / Navigate / Map via a single
resolver (resolvePersonPos / activeTargetPos) that prefers a live
[LOC] share over the last-advertised GPS fix.
- Follow live contacts — Navigate to a live-sharing contact follows them
as they move and adds an ETA line; quick-share your own position from
the Map.
- Map & status-bar upgrades — home mini-map gets a north marker, scale
tick, and a connected trail line (was disconnected dots); status line
shows tracked-node count, an arrow + distance to the active Locator/Nav
target (falling back to the nearest live-tracked contact); GPS fix icon
in the top status bar, shown only on GPS boards with GPS enabled.
- Trail auto-pause — recording freezes on stops (banking elapsed time,
breaking the map line across the idle gap) and resumes on movement
without ending the session.
- Streaming trail simplification — GPS points are simplified in-stream
via a fixed-corridor (Reumann-Witkam) pass tuned for fidelity: straight
runs collapse to their endpoints, curves stay bounded to the Min-dist
tolerance, so the 512-point buffer covers a far longer route than a
flat point budget would suggest.
- Collapsible Tools (Location / Comms / System sections, fold-in-place
like Settings) and page-indicator icons on the home carousel.
- Waypoint coordinate editor — add a waypoint by scroll-editing lat/lon
digit by digit.
Fixes:
- Critical: low-heap hang and contact loss on RAM-tight builds. Halved
message-history scrollback rings (recovering ~14 KB free heap) and
made contacts/channels/prefs persistence atomic (temp file + rename),
so an interrupted save can no longer corrupt or wipe the store.
- Serial.write() bounded so a stalled USB host can't hang the device.
- Nearby Nodes: live [LOC] senders respect the type filter, sort by
shared position, and the list refreshes so live shares bubble up.
- Map: live contacts are labelled before waypoints.
- GPS status icon hidden when GPS is off in Settings.
- Splash screen no longer truncates a pre-release tag's own dash (e.g.
v1.21-rc1) when stripping the build's commit-hash suffix.
- Null-guarded the Locator target picker; clamped loc-share channel
index on load.
Under the hood:
- -Os size optimisation on the e-ink and GAT562 30S solo envs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
isValidRepeaterProfile() hard-coded the 150-960 MHz SX1262 range, which
would wrongly reject legal frequencies on any other chip. Take the freq
bounds as parameters and pass radio_driver.getFreqBounds() at both call
sites (repeaterProfileValid() and the load-time migration), so the chip's
own validated range is the single source of truth. DataStore.cpp gains a
target.h include for radio_driver (declared extern there).
DigitEditor::render() now zero-pads the integer part to int_digits: the
cursor addresses place values (100/10/1/0.1…), so a value with fewer
integer digits than int_digits would shift every glyph and misplace the
highlight. No visual change for the frequency field (always 3 digits).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the repeater filter knobs from "politeness" to "forwarding
filters" across code comments, FEATURES.md and the docs, and correct
references that hadn't followed the controls when they moved from
Settings › Radio to the dedicated Tools › Repeater screen.
Comment/doc accuracy fixes:
- NodePrefs: user_radio_presets are now written by both Settings and
Repeater (shared picker), not Settings only.
- DiagnosticsScreen: class header listed only some rows; spell out the
full set (forwarded, signal, pool/queue, error flags, reset gesture).
- RepeaterScreen header no longer claims to show live forwarding stats
(they live on Diagnostics).
- tools_screen.md: drop the stale paragraph claiming the Repeater screen
shows live stats at the bottom — it is config-only.
Comments/docs only; no behaviour change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings > Radio gains a repeater toggle, 16 community-suggested radio
presets plus manual Freq/SF/BW/CR tuning (digit-by-digit Freq editor),
4 persisted user preset slots, and the packet pool bumped 16->32 so
queued retransmits stop starving incoming-packet allocation while
relaying.
Four opt-in politeness knobs (skip-advert, max-hops, yield, min-SNR),
all flood-only and off by default, plus overhear suppression that
cancels a queued retransmit if a peer relays the same packet first.
Adaptive Power Control is suppressed while relaying (pins TX power to
the ceiling) and duty-cycle RX is forced off, since a repeater needs
to hear and relay at consistent power.
A dedicated Tools > Repeater screen consolidates the toggle, the
politeness knobs, and live forwarding stats, plus an optional "Custom"
radio profile — a dedicated frequency/SF/BW/CR for relaying, separate
from the companion's own network, band-matched to the companion
frequency by default and used everywhere a radio change can happen
(boot, on-device toggle, app-driven CMD_SET_RADIO_PARAMS, Settings
radio edits) so the device never silently falls back to the wrong
params mid-relay.
Diagnostics gains the actually-forwarded packet count, real heap-free
via mallinfo(), a reset-counters popup, and hardened loop-detect
bounds. Also: a frequency-floor fix and a float-equality preset-match
fix in the repeater profile logic, deduped BW-table/valCol/profile-
seeding helpers shared between Settings and the Repeater screen, and
a build.sh fix tolerating control characters in `pio project config`'s
JSON dump.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reply-bot overhaul on top of the trigger/reply auto-reply:
Robustness
- single botTriggerMatches() shared by DM/channel paths; named constants
(BOT_REPLY_COOLDOWN_MS / BOT_SCRATCH) replace magic numbers.
- per-contact DM throttle (8-entry ring) so a second sender isn't starved
while one contact is on cooldown.
- channel anti-loop: skip only when an incoming message equals our own reply
(was: any reply containing the trigger word — which silently killed channel
replies for the common "trigger word in reply" setup).
Features
- away / reply-to-all: a lone "*" trigger matches every message.
- independent DM vs channel triggers (bot_trigger / bot_trigger_ch); "*" works
on the channel too, bounded by cooldown + echo guard.
- query commands: a DM or monitored-channel message is scanned for "!word"
tokens — !ping/!batt/!loc/!time/!temp/!hops/!status/!help — merged into one
combined reply. DM = per-contact throttle, ignores quiet hours; channel =
broadcast, per-channel cooldown, respects quiet hours. !hops uses
getPathHashCount() (0 = direct).
- quiet hours (bot_quiet_start/end, local, wraps midnight) silence push replies.
- reply counter shown in the BotScreen header.
UI / storage
- BotScreen: 9 rows, scrolling list (no more cramming), field I/O via
fieldBuf()/fieldCap().
- prefs bot_commands_enabled / bot_quiet_start / bot_quiet_end / bot_trigger_ch
persisted; schema 0xC0DE000A → 0xC0DE000C with clamping + migration
(bot_trigger_ch seeded from bot_trigger on upgrade).
- docs: tools_screen bot section rewritten; FEATURES.md refreshed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
End-to-end delivery indicators on the device UI, drawn next to outgoing
messages and auto-scaled to the font (legible on landscape e-ink).
DM (and room servers, which share the DM path):
- Pending / delivered / failed marker driven by the real end-to-end ACK.
Pending shows a row of dots — one per send — so auto-resend progress is
visible before it resolves to ✓ / ✗.
- Auto-resend: new pref dm_resend_count (0-5, default 2), Settings ›
Messages › Resend. A pending DM whose ACK times out is re-sent (reusing
the original timestamp) until resends run out, then ✗. Driven from
UITask::loop so it completes in the background, independent of screen.
- Incoming dedup: a retry reuses the sender timestamp + text but carries a
fresh packet hash, so addDMMsg drops copies matching prefix+ts+text.
Channels (flood, no recipient ACK):
- ✓ only once a repeater echo confirms the send was relayed into the mesh;
no echo is normal, not a failure (no pending/fail shown). A small ring
tracks a burst of sends so each matches its echo. Receive-path hashing is
gated so the hot flood path is untouched when idle.
Shared:
- Markers shown in both the history list and the fullscreen message view.
- Reusable scalable mini-icon facility in icons.h (bitmap + auto-scale);
adding a new status icon is a bitmap plus one draw call.
No changes to the upstream mesh library (src/).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two independent, default-off toggles under Settings › Radio.
Pwr save: hardware RX duty-cycle (SX126x SetRxDutyCycle via
startReceiveDutyCycleAuto). The chip cycles RX↔sleep and wakes on a preamble —
no MCU state machine; recvRaw reads the packet exactly as in continuous RX.
Falls back to continuous RX on non-SX126x. (Replaces an earlier software-CAD
state machine that fought the hardware: polling a warm-sleeping chip gave a
phantom-busy channel that stalled TX ~4 s and dropped ACKs in the scan gaps.)
Auto pwr: Adaptive Power Control. tx_power_dbm becomes a ceiling; actual TX
power tracks the reverse-link SNR margin (measured above the per-SF demod floor,
EWMA-smoothed, proportional step with a deadband). Feedback comes from direct /
room-server ACKs and, for channels (no ACK), from hearing a repeater rebroadcast
our own flood; a lost confirmation ramps power back up so channel sends can't get
stranded below what the repeaters can hear.
Prefs schema 0xC0DE0009 (rx_powersave, tx_apc). Radio page / name bar show the
live TX power; noise floor reads n/a while duty-cycling.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Follow the global Units preference in the two remaining Trail distance
spots that were still metric-only:
- Min dist gate: the index is now a unit-agnostic level (0=finest..3).
Metric stays 5/10/25/100 m; imperial uses round 15/30/75/300 ft (applied
as their metre equivalents in the sampling gate).
- Map scale grid: imperial mode uses round ft/mi steps (10 ft … 100 mi)
instead of metric steps with a converted label. Step storage moved to
float metres so sub-metre imperial steps keep their geometry; labels come
from a parallel table so the scale bar reads an exact round value.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a single "Units" choice (Settings › System: Metric / Imperial) that
governs every distance and speed shown in Tools — Nearby Nodes, the Trail
views, and the navigate-to-point screen.
- NodePrefs: units_imperial (global) + trail_show_pace (Trail readout mode),
schema bumped 0xC0DE0005 → 0006. The old combined trail_units_idx is kept
for file-layout stability but no longer drives anything; upgraders default
to metric + speed.
- geo::fmtDist gains an imperial mode (ft below ~1000 ft, then miles).
- NavView / Nearby / Trail (waypoint list, Summary distance, List deltas,
map scale-bar label) all format through the global preference.
- Trail's action-menu "Units" row becomes a Speed/Pace readout toggle; the
km-vs-mi unit now follows the global setting instead of being one of four
combined options.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add per-channel favourite marking and a Settings filter (all/fav) for
the channel list, symmetric with the existing DM and Room filters.
NodePrefs:
- ch_fav_bitmask (uint64_t): bit i = channel i is marked favourite
- ch_fav_only (uint8_t): 0=show all channels, 1=favourites only
- SCHEMA_SENTINEL bumped to 0xC0DE0005
DataStore: save/load both new fields before the sentinel.
SettingsScreen: new CH_FILTER item ('Channels: all/fav') in the
Contacts section, positioned between DM_FILTER and ROOM_FILTER.
QuickMsgScreen:
- buildChannelList() skips non-favourite channels when ch_fav_only=1
- Channel context menu gains a 4th option 'Fav'/'Unfav' that toggles
ch_fav_bitmask for the selected channel and rebuilds the list
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Second row in the Config view: UP/DOWN moves focus between Min dist
and Units, LEFT/RIGHT cycles the focused row's value. Units propagates
to the Summary view, which now shows either "Avg: N km/h" / "N mph"
or "Pace: M:SS /km" / "/mi" depending on the choice.
Pace renders as "--:-- /unit" when distance or elapsed time is zero
(avoids divide-by-zero glitches with one-point trails). mph conversion
uses the 0.621371 ratio with rounding; pace works in floating point
off raw metres and seconds for accuracy at low speeds.
NodePrefs gains trail_units_idx as another reserved-ish byte; old saves
load with 0 = km/h, no schema bump needed since the rd() lambda already
defaults missing fields to zero.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
GPS NMEA polling is cheap, and a slower cadence just hides motion from
the trail; the min-delta gate already filters jitter without throttling
the GPS. Both knobs that exposed cadence-style controls to the user are
removed:
- Trail sampling is fixed at TrailStore::SAMPLING_SECS = 1 s, matching
the sensor manager's built-in GPS update default. The
intervalSecs / intervalLabel / INTERVAL_COUNT helpers go with it.
- GPS update rate ("GPS upd" entry) leaves the sensor manager on its
built-in 1 s default. applyGPSInterval and the GPS_INTERVAL_OPTS /
LABELS tables / gpsIntervalIndex helper are deleted.
Both NodePrefs fields (gps_interval, trail_interval_idx) are retained
as reserved so the schema sentinel doesn't have to bump — older saves
load cleanly, the bytes are just ignored.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds Tools › Breadcrumb. Enter on the screen toggles tracking; while
active, UITask::loop samples GPS at the cadence chosen in settings
(default 1 min) and drops the point into a 256-entry RAM ring guarded
by a min-distance gate (default 25 m). A "G" indicator joins "A" in
the status bar with the same blink convention.
New storage:
- examples/companion_radio/Breadcrumb.h — BreadcrumbStore class
- 256 × 12 B = 3 KB RAM (survives auto-off, lost on reboot — explicit
flash-slot save comes in phase 4)
- Haversine min-delta gate, total distance, elapsed seconds, current
km/h, bounding-box helper
New screen:
- examples/companion_radio/ui-new/BreadcrumbScreen.h — Summary view
with Status, Points, Dist (m or km), Time (h:mm), Speed; Enter
toggles tracking, Esc returns to Tools
Schema bump 0xC0DE0002 → 0xC0DE0003 for two new NodePrefs bytes:
breadcrumb_interval_idx (1min default) and breadcrumb_min_delta_idx
(25m default). Older saves leave both at zero, which matches the new
defaults. DataStore::loadPrefsInt/savePrefs read/write the pair.
Logging on/off is a runtime flag inside BreadcrumbStore — not a
preference — so reboot returns to the off state cleanly; the user
will be able to persist a snapshot to a slot in phase 4.
Phase 2 (map view), 3 (point list), 4 (slot save/load, GPX export over
USB), and 5 (settings UI) follow incrementally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New home page rendering 6 pinned-contact slots. Grid transposes to
orientation: landscape → 3×2, portrait → 2×3. Joystick claims UP/DOWN
and inner LEFT/RIGHT for grid nav; edge LEFT/RIGHT fall through to
page navigation. Selected tile inverts via drawSelectionRow, filled
tile shows contact name + unread badge, empty tile shows "+".
Storage:
- NodePrefs::favourite_contacts[6][6] (6-byte pub_key prefix per slot,
all-zero = empty; collision probability with a real key is 2^-48)
- HomePageBit gains HPB_FAVOURITES = 11 (HPB_COUNT = 12), with a new
HP_FAVOURITES mask bit so the page is toggleable in Settings
- New PAGE_ORDER_LEN constant decouples the persisted array length (11)
from the page-type count; loops over page_order now use it, value-range
checks still use HPB_COUNT
- homePageBit returns 0 for HPB_SETTINGS / HPB_QUICK_MSG explicitly
rather than by bit-index range, so HPB_FAVOURITES (bit 11) is correctly
treated as toggleable
- Default order inserts FAVOURITES after CLOCK; SHUTDOWN drops to the
fallback "missing pages" append (still reachable, lands at end)
Schema sentinel bumped to 0xC0DE0002. DataStore::loadPrefsInt and
savePrefs read/write the new field. Older saves leave the field
zero-initialised (all slots empty), which is the natural starting state.
Phase 2 (Pin from Contact options) and Phase 3 (Pin from empty-slot
mini picker) wire interactions; this commit handles render + nav only.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
pageBit/bitToPage in HomeScreen and homePageBitIndex in SettingsScreen
each spelled out the bit assignment with magic numbers 0..10. Lift the
numbering into a NodePrefs::HomePageBit enum (HPB_CLOCK … HPB_QUICK_MSG,
HPB_COUNT) and route every reference through it: mapping functions, the
HP_* bitmasks, the homePageLabel table sizing, loop bounds over
page_order, the bounds check on page_order[0], the "always-visible"
discriminator for SETTINGS/QUICK_MSG.
Per-class enums (HomeScreen::HomePage, SettingsScreen::SettingItem)
stay — they index different concerns (navigation page vs. settings
row). The mapping functions still exist, but now reference a single
source of truth for the bit values.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Old saves (without sentinel) load unchanged — rd() lambda zero-inits
anything not on disk. New saves append a 4-byte sentinel that encodes
the schema revision; the low byte is bumped on every layout change in
loadPrefsInt/savePrefs. Mismatch on load logs a warning and continues
with defaults; the next savePrefs writes the current sentinel so the
file self-heals.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Previously page_order_set status was inferred from page_order[0] being
in 1..11, so a single junk byte in that range falsely triggered
custom-order mode. Add explicit page_order_set magic (0xA5) written
alongside the array; pre-magic saves are migrated once on load when
their first byte still passes the legacy range check.
Also fix(ui): keep "@[nick] " prefix out of placeholder expansion in
QuickMsgScreen reply path, so a nick containing a token like {loc}
isn't substituted.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add "Full rfsh" setting (e-ink only) with options off/5/10/20/30
partial refreshes between full refreshes. Prevents ghosting on panels
that accumulate artifacts after many partial updates.
GxEPDDisplay counts partial refreshes and calls display.display(false)
every N frames when the interval is set. Persisted in DataStore and
applied at startup via applyFullRefreshInterval().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add NodePrefs::joystick_rotation (0-3 steps CW), persisted in DataStore
alongside display_rotation. rotateJoystickKey() now takes a runtime rot
parameter instead of compile-time JOYSTICK_ROTATION macro. UITask::loop()
reads joystick_rotation from NodePrefs each frame. Settings screen exposes
"Joystick" rotation item on any build with UI_HAS_JOYSTICK. JOYSTICK_ROTATION
macro still works as compile-time default for legacy/non-prefs builds.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Resolved conflicts to preserve eink-ui layout helpers (valCol, lineStep, sepH)
while integrating the page_order persistence, buildVisibleOrder(), and
Settings/Messages ordering UI from the wio-tracker-l1-improvements branch.
display_rotation is now written before page_order in the save/load sequence.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NodePrefs: add page_order[11] (1-indexed bit-index, 0=end/legacy).
DataStore: persist page_order appended after use_lemon_font.
UITask/HomeScreen:
- bitToPage(): maps stable bit indices 0-10 to HomePage enum values
- buildVisibleOrder(): respects page_order when initialised, else
falls back to default enum sequence
- navPage() and navigation dots use buildVisibleOrder()
SettingsScreen Home Pages section:
- Add Settings (bit 9) and Messages (bit 10) — show as "always"
- LEFT/RIGHT on any home page item moves it earlier/later in order
- ENTER toggles ON/OFF for pages that can be disabled
- Position number shown before label once custom order is active
- ensurePageOrderInit() seeds default order on first reorder action
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds Settings > Display > Rotation (0°/90°/180°/270°) that persists to
NodePrefs and is applied on startup. Falls back to compile-time
DISPLAY_ROTATION when the field is missing from an older prefs file.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add Lemon font (LemonFont.h, LemonIcons.h) to the standard build
alongside the Adafruit built-in font; ~101 KB added to flash
- SH1106Display: add _use_lemon flag + setLemonFont(bool) to switch
at runtime; print() and getTextWidth() use Lemon path when active;
translateUTF8ToBlocks() passes UTF-8 through unchanged (Lemon supports
full Unicode U+0020-U+04FF) vs transliterating for the default font
- DisplayDriver: add getCharWidth()/getLineHeight() virtuals (defaults 6/8);
SH1106Display returns 5/9 for Lemon, 6/8 for default; add setLemonFont()
no-op virtual; fix orphaned UTF-8 leading byte in drawTextEllipsized
- FullscreenMsgView: replace fixed-char-count word-wrap with pixel-accurate
wrap using display.getTextWidth(); use getLineHeight() for spacing so
Lemon (9 px) and default (8 px) both render correctly
- NodePrefs: add use_lemon_font field (0=default, 1=Lemon)
- SettingsScreen: add "Font" item in Display section (Default / Lemon),
calls UITask::applyFont() on change
- UITask: add applyFont() that calls display->setLemonFont(use_lemon_font);
called at startup (begin()) and when the setting changes
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Toggle in Settings > Display > Format. In 12h mode the clock shows
h:mm AM/PM (or h:mm:ss AM/PM with seconds, no space before AM/PM).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Long press Back starts lock sequence; 3 Enter presses within 3s toggle lock
- Locked screen wakes for 5 seconds on any key, showing clock and unlock hint
- Incoming messages do not wake the display while locked
- Auto Lock setting in Display section: locks automatically when screen turns off
- Lock state persisted in UITask; NodePrefs gains auto_lock flag
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add second ringtone slot (ringtone2_*) to NodePrefs and DataStore.
Add per-channel and per-DM melody assignment (built-in / melody 1 / 2)
stored in NodePrefs bitmasks and DmMelodyEntry table.
Settings screen exposes DM/CH sound items; RingtoneEditorScreen supports
switching between slots. notify() uses buildMelodyFromPrefs() to select
the correct RTTTL string per contact.
Remove broken nRF52 volume control from buzzer.cpp: tone() uses
NRF_PWM2 with DECODER.MODE=Auto so TASKS_NEXTSTEP has no effect and
duty cannot be changed before the first DMA read without patching the
Arduino core. applyVolume() is now a no-op on nRF52.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds configurable periodic 0-hop self-advert that includes GPS coordinates,
making the device's position visible in other nodes' Nearby Nodes screen.
Options: off / 1min / 2min / 5min / 10min / 30min / 1h.
Accessible via Tools → Auto-Advert. Timer runs in MyMesh::loop().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add NearbyScreen: GPS contact list with haversine distance sort,
type filter (ALL/Chat/Rpt/Room/Snsr), detail view with ping (RTT via
ACK poll), node scan via advert(), context menu
- Add DashboardConfigScreen: configure up to 3 data fields on the clock
page (Battery, Temp, Humidity, Pressure, GPS, Altitude, Lux, CO2,
Contacts); entered via long-press ENTER on clock page
- Rework HP_CLOCK layout: full-screen clock (size 2 at y=0), date at
y=19, separator at y=28, three data field rows at y=31/41/51;
hide node name/battery indicator on clock page
- Persist dashboard_fields[3] in NodePrefs and DataStore
- Add isAckPending() to MyMesh for NearbyScreen ping detection
- Wire NearbyScreen into ToolsScreen and UITask
- Reduce NearbyScreen entry buffer from MAX_CONTACTS(100) to 32,
saving ~3.3 KB RAM
- Switch haversine/bearing math from double to float (sinf/cosf/atan2f),
eliminating double libm and saving ~5-10 KB flash
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Long-press ENTER in the DM contact list opens a context menu with:
- "Mark as read": clears unread counter for that contact
- "Notif: default/OFF/ON": cycles notification state (same as channels)
Notification state is persisted in NodePrefs (dm_notif[16] table,
keyed by 4-byte pub_key prefix). When muted, the buzzer is silenced
for that contact's messages; when force-on, buzzer plays even in
quiet mode. Default follows the global buzzer setting.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Bot redesign: DM bot active for all private messages (no pubkey filter),
channel bot optional with separate enable flag; both can run simultaneously
- Bot: one shared trigger, separate reply texts for DM and channel
- Buzzer: add Auto mode (mutes when BT connected, unmutes on disconnect);
per-channel force-on overrides still work as intended
- Settings: defer flash writes to menu exit (only when dirty)
- Settings: add Seconds toggle (hide clock seconds, refresh drops 1s→60s)
- Fullscreen msg preview: fix truncation (fmsg buf 79→140 chars)
- RingtoneEditor: fix melody playback cut after first note (RTTTL lib holds
pointer — moved play buffer to member variable)
- BotScreen: remove key hint footer
- .gitattributes: protect README.md from upstream merge conflicts
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The bot can now reply to a specific DM contact instead of a channel.
UI (BotScreen): item 1 cycles through all channels followed by all DM
contacts (ADV_TYPE_CHAT). The label switches between "Channel" / "Contact"
and the value shows the channel or contact name. Left/right/enter navigate
the combined list.
Logic (MyMesh::onMessageRecv): when bot_target_type==1, match the trigger
against incoming DM text and reply via sendMessage(). A 4-byte pubkey
prefix identifies the target; all-zero prefix matches any DM sender.
Persistence: bot_target_type and bot_dm_pubkey[4] appended to prefs with
backward-compat read guard (old firmware defaults to channel mode).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New 'Tools' page on the home screen carousel with Ringtone Editor and Auto-Reply Bot items
- Bot settings: enable/disable toggle, channel picker, trigger phrase, reply text (keyboard with pre-fill)
- Bot logic in MyMesh: case-insensitive substring match, 10 s cooldown to prevent reply loops
- Settings: Home Pages visibility control (which carousel pages are shown; Settings and Messages always visible)
- DataStore: persist home_pages_mask and bot fields with backward-compat guards on read
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New "Home Pages" section in Settings lets the user toggle which pages
appear in the home screen carousel. Settings and Messages are always
shown; Clock, Recent, Radio, Bluetooth, Advert, GPS, Sensors, Tools
and Shutdown can each be hidden individually.
- NodePrefs: home_pages_mask uint16_t (bit per page, 0=all visible)
- HomeScreen: isPageVisible/navPage skip hidden pages; dots indicator
counts only visible pages; enforces visible page on re-entry
- SettingsScreen: SECTION_HOME_PAGES with per-page ON/OFF toggles
- DataStore: persisted at offset 1598
- Default: all pages visible (0x01FF)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- RingtoneEditorScreen: 32-note step sequencer accessible via new Tools page on home screen. U/D=pitch, ENTER=octave cycle, L/R=cursor, MENU=options (play, duration, BPM, insert/delete, save). Notes stored packed in NodePrefs and persisted via DataStore.
- ToolsScreen: new "Tools" home page entry launching the editor
- Buzzer volume: 0-4 bar control in Settings > Sound, persisted to prefs
- Buzzer notifications: fixed notify() firing inside wrong serial-guard branch and before addChannelMsg set the channel index
- Unread counter: fixed newest-first index direction; watermark formula now correct
- OLED brightness: wider range via pre-charge register 0xD9 combined with contrast
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- NodePrefs: add buzzer_volume field (0=min..4=max, default 4)
- DataStore: persist buzzer_volume at end of prefs file (backward-compat)
- buzzer: setVolume()/getVolume(); applyVolume() sets PWM duty cycle via
analogWrite() after each rtttl::play() call to control output amplitude
- Settings UI: new BzrVol bar item in Sound section (left/right to adjust)
- UITask: apply saved volume on startup alongside brightness
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds SECTION_CONTACTS with two items under Settings:
- DM: "fav" (default) / "all" — controlled by dm_show_all in NodePrefs
- Rooms: "all" (default) / "fav" — controlled by room_fav_only in NodePrefs
Both fields default to 0, preserving current behaviour on firmware upgrade.
buildContactList() reads the prefs to filter accordingly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Long-pressing ENTER on a channel in the channel picker opens a
2-item context menu: "Mark all read" and "Notif: default/OFF/ON".
Muted channels still increment the unread counter silently; force-ON
overrides global buzzer mute. Settings persist to flash via NodePrefs
(ch_notif_override / ch_notif_muted bitmasks).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Settings → Messages section: 10 user-editable message slots (M1–M10)
with on-screen keyboard editor; slot M1 defaults to "OK" on first boot
- Keyboard: add Caps Lock [^] button — stays highlighted when active,
all letters display and insert as uppercase until toggled off
- Keyboard: add [{}] placeholder picker overlay — inserts {loc} or {time}
into the message at cursor position; available in both compose and
settings slot editor
- Max message length raised to 139 chars to match the companion app;
ChHistEntry text buffer extended to 140 chars
- NodePrefs: custom_msgs slot size extended to 140 chars per slot
- KB constants (KB_MAX_LEN, KB_CHARS, etc.) moved before SettingsScreen
so both SettingsScreen and QuickMsgScreen can reference them
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
