- GxEPDDisplay now uses the same single misc-fixed 6x9 font as the OLED
driver (Lemon retired there too), with baseline math updated for the
new ascent.
- Clock Tools' Alarm screen: Repeat and Armed now respond to LEFT/RIGHT
like every other multi-value/toggle field in Settings, not Enter-only;
Hour/Minute merged into one Time row edited with a hand-rolled HH:MM
digit cursor (like the Timer's), replacing the two-row DigitEditor
popups; Repeat's "Off" label now matches the codebase-wide ON/OFF
casing.
- Top status bar: battery icon now shares the same box height as the
other status icons (Bluetooth/mute/etc.) instead of standing 2px
taller, and its charge nub is properly vertically centred instead of
drifting off-centre at non-multiple-of-4 box heights.
- Small settings-gear icon glyph tweak; wio-tracker-l1 screenshot build
variant now enables DUAL_SERIAL.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-Reply Bot gains a third target (room servers, alongside DM and
channel), new {name}/{hops} reply placeholders, and a DM all/favourites
allow-list. BotScreen is redesigned as a circular tab carousel (Direct /
Channel / Room / Other, same interaction as Nearby Nodes' filter tabs)
instead of one long scrolling list, which also exposed and fixed a
leftover coupling where Channel/Room trigger-replies and their !command
handling secretly depended on the DM tab's Enable/Commands toggles —
each target's Enable and Commands are now fully independent.
- NodePrefs: bot_room_enabled/prefix/trigger/reply, bot_dm_scope,
bot_commands_ch/bot_commands_room (bot_commands_enabled repurposed as
DM-only). SCHEMA_SENTINEL 0xC0DE001D -> 0xC0DE001F; sizeof unchanged
at 2712 (new bytes absorbed existing padding, verified via a
standalone host compile + offsetof check).
- DataStore: persists all new fields; seeds bot_commands_ch/room from
the old shared bot_commands_enabled on upgrade so existing
channel/room command behaviour isn't silently lost.
- MyMeshBot: tryBotReplyRoom/tryBotRoomCommand mirror the channel bot's
shape but post via sendMessage (room relays to members itself);
requires an existing login session with that room, same as a manual
post would. botDmSenderAllowed() gates DM trigger-reply/commands on
the favourites bit when bot_dm_scope=Fav.
- MsgExpand: {name}/{hops} as optional trailing params (default
nullptr/-1, no existing caller affected) — deliberately not exposed
on the general compose keyboard, only on bot Reply fields.
- QuickMsgScreen/UITask: room-target picker (mirrors the channel
picker), routing through the existing room-login prompt when there's
no saved password yet.
- BotScreen: tab carousel (LEFT/RIGHT switches tabs, UP/DOWN moves
rows, Enter is now the only way to change a value); Enable split out
of Channel/Room's combo row; Quiet Hours gained a stepper sub-mode;
Commands moved from a shared toggle into each tab.
- docs/tools_screen.md updated for the new tab layout and behaviour.
Not build-verified — no PlatformIO toolchain in this environment.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Alarm repeat (Clock Tools):
- NodePrefs::alarm_repeat_mask (weekday bitmask, struct tm::tm_wday
convention) — new Repeat row cycles Off/Daily/Weekdays/Weekends.
computeAlarmNextFire() scans the next 7 days for a matching weekday when
set; evaluateAlarm() only clears alarm_on (one-shot) when the mask is
empty, otherwise re-arms. mask==0 is byte-for-byte the original one-shot
behaviour, so existing users see no change.
On-screen keyboard alphabets (Settings > Keyboard > Alphabet):
- KeyboardWidget reworked from single-byte ASCII cells to UTF-8 codepoints
(insertion, backspace and T9 in-place cycling all codepoint-aware now, so a
multi-byte character is never split) — see kbApplyCapsUtf8/kbUtf8Len/
kbUtf8CharAt/kbUtf8LastCharBytes.
- Cyrillic, Greek and an Extended Latin set (Polish/Czech/Slovak/German/
French/Spanish/Nordic diacritics) join the keyboard's existing #@/abc page
cycle (Latin -> alt alphabet -> Symbols -> Latin) — no new key needed.
NodePrefs::keyboard_alt_alphabet picks which one, if any, is active.
- Lemon font is forced on transiently inside KeyboardWidget::render() (saved
and restored every call) whenever the alt-alphabet page is showing or
already-typed text has non-ASCII bytes, so composing is visible even if
Font is set to Default.
- Each script's caps-shift rule is distinct and documented in
kbApplyCapsUtf8: flat -0x20 for ASCII/Cyrillic/Greek (with the ё/ς
exceptions), flat -0x20 for Latin-1 (à-þ), and an adjacent-pair -1 for
Latin Extended-A (verified against every character actually used, not a
blanket rule for that whole Unicode block).
NodePrefs schema: two tail-appended fields this session (alarm_repeat_mask,
keyboard_alt_alphabet), SCHEMA_SENTINEL 0xC0DE001B -> 0xC0DE001D,
sizeof(NodePrefs) 2496 -> 2504 (verified via a standalone host compile).
Docs: Clock Tools' Repeat row, Settings > Keyboard > Alphabet, and the
Rooms keyboard note (no longer ASCII-only once an alphabet is enabled).
Not build-verified — no PlatformIO toolchain available this session. Caps
mappings cross-checked against Python's Unicode case tables; UTF-8 literal
bytes verified at the byte level.
UI-polish trio from CODE_REVIEW (biggest "feels finished" gain per line):
- Pill unread badges: new DisplayDriver::drawUnreadBadge()/unreadBadgeWidth()
draw a filled capsule with the count knocked out (corners knocked back for a
rounded look; inverts on a selected row). Replaces the bare right-aligned
digits in MODE_SELECT, the contact/channel pickers and favourites tiles.
No <stdio.h> in the header — fmtBadgeCount formats manually, clamps to 99+.
- Unified DM/CH history headers: DM_HIST and CHANNEL_HIST drew their titles by
hand (drawTextCentered + fillRect at lh+1), a different height/separator than
every other screen. Both now route through drawCenteredHeader().
- Trimmed default home carousel: new NodePrefs::HP_DEFAULT (Clock, Tools,
Shutdown, Favourites, Map; Messages + Settings always visible = 7 pages).
applyDefaults() seeds it instead of HP_ALL. Recent/Radio/BT/Advert/GPS/Sensors
are opt-in via Settings > Home Pages. Existing users keep their saved mask —
factory default only; no migration, no schema bump.
Both solo envs build green (OLED RAM 69.9%/Flash 62.8%; e-ink SUCCESS).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Losing the whole route on a low-battery auto-shutdown was the worst solo-mode
failure. New NodePrefs::trail_autosave_lowbatt toggle (Tools > Trail >
Settings > Auto-save, default OFF): UITask::shutdown() writes the live trail
to /trail when the toggle is on and _trail.count() > 0. The count guard stops
an empty trail from wiping a previously saved one; it overwrites the same
/trail file the manual Trail > Save uses.
Schema bumped 0xC0DE001A -> 0xC0DE001B: append-only tail field with a load
clamp, so pre-0x1B saves default to off. sizeof(NodePrefs) is unchanged (the
byte fits existing padding after keyboard_type), so the tripwire assert stays
2496.
Builds green: WioTrackerL1_companion_solo_dual (RAM 69.9%, Flash 62.8%).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The on-screen keyboard grid has been a-b-c...z alphabetical order since
it was first introduced, never an actual QWERTY row layout. The
"QWERTY" name only appeared with the T9 option (needed something to
contrast it against) and was inaccurate from the start.
keyboard_type was inserted into the append-only NodePrefs layout without
bumping SCHEMA_SENTINEL, leaving it at 0xC0DE0019 — the same value plain
main already uses without this field. A device already on that schema
would silently misalign every field read after alarm_min once updated
to a build containing this change. Bump to 0xC0DE001A and fix the
migration comment's stale version label (it said 0xC0DE0018, which was
already taken by the MAP home-page migration).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Growing page_order 11 → 13 bumped sizeof(NodePrefs) 2488 → 2496 (the 2 added
bytes plus alignment padding to the next 8-byte boundary). Save/load/clamp and
SCHEMA_SENTINEL were already updated; this syncs the static_assert. Verified
with a host compile (fixed-width members → layout matches the target).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Map page had no Settings entry and Shutdown was pinned to the end of the
carousel because page_order held only 11 slots — full in the common
GPS+SENSORS config, so both pages fell back to being appended at nav time and
couldn't be moved. Grow page_order to 13 (== HPB_COUNT) so every page has a
reorderable slot, and add Map + Shutdown to the default order and the
required-append list.
To keep the persisted format backward-compatible (page_order sits mid-record,
not at the tail), the on-disk head stays the original 11 bytes at its existing
offset and the 2 new slots are appended at the file tail, matching the
append-only schema design. Bump SCHEMA_SENTINEL to 0xC0DE0019; on a pre-0x19
save the tail bytes are the old sentinel/EOF, so they're clamped to 0 and
ensurePageOrderInit re-appends Map/Shutdown into the freed slots on first use.
Drop the now-dead Shutdown-eviction path (13 slots fit all pages).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The prefs schema-migration block runs on every SCHEMA_SENTINEL mismatch, and
the "turn Favourites on" step was ungated. Since each firmware release bumps
the sentinel, every update re-applied `home_pages_mask |= HP_FAVOURITES`,
clobbering a user who had hidden it. Gate it to the transition that added
Favourites (sentinel < 0xC0DE0002), matching the trail_units_idx migration.
The Map/Trail carousel page shipped with no visibility toggle: pageBit(MAP)
returned -1 so it was always visible with no Settings row. Add a proper "Map"
toggle (new HPB_MAP/HP_MAP bit, pageBit/bitToPage cases, HOME_MAP settings
row) plus a gated one-time migration (sentinel < 0xC0DE0018) that keeps it
visible for upgraders. Bump SCHEMA_SENTINEL to 0xC0DE0018; page_order[] stays
a literal 11 so the persisted layout is unchanged.
Also fix the fresh-install seed, which used a stale 0x01FF literal that left
Favourites hidden on new installs despite its "all pages visible" comment;
seed NodePrefs::HP_ALL so fresh installs match upgraders (Favourites + Map).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a Clock Tools screen (Enter on the home Clock page) with three time
utilities, plus the engine that drives them from UITask::loop() so they
work regardless of the current screen / display state:
- Alarm: a single one-shot wake alarm. Persisted in NodePrefs as a local
time-of-day; UITask schedules it as an ABSOLUTE fire instant recomputed
from that time, so it survives RTC re-syncs (mesh/app/GPS/CLI all jump
the clock) — small corrections still fire on time, a jump over the
target still fires (late, up to 6 h). Disarms after firing. A bell
icon signals an armed alarm on the clock face and the top status bar.
- Timer: a millis-based countdown (sync-immune), big HH:MM:SS readout,
rings even when off-screen.
- Stopwatch: millis-based, keeps running in the background.
Numeric fields use the shared framework DigitEditor (digit-by-digit,
min/max enforced). The alarm/timer/ring engine lives in UITask alongside
the locator/live-share engines (no screen-cast for time-critical logic).
E-ink: live readouts refresh coarsely (and on any key); timing is exact
regardless, and the countdown's buzzer fires on time. Rings override mute
and are dismissed by any key (auto-stop after 1 min). Cannot wake from a
full Shutdown (CPU/RAM powered down).
NodePrefs: +alarm_on/alarm_hour/alarm_min (fit existing tail padding,
sizeof unchanged 2488), SCHEMA_SENTINEL 0xC0DE0016 -> 0xC0DE0017,
DataStore read/clamp/write in lockstep.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a "Mark avg" trail setting (Off/5/10/30 s). When set, Tools › Trail ›
Mark here samples the GPS fix once a second for the chosen window and stores
the mean position instead of one instantaneous fix — a steadier, more
accurate mark for a precise spot. A progress screen shows time left + sample
count; Cancel aborts; the window then opens the label keyboard as usual.
Off (default) keeps marking instant.
Sampling runs in WaypointsView::poll() (forwarded from TrailScreen::poll())
so it ticks on the main loop, independent of the slow e-ink render cadence;
int64 accumulators avoid overflow over 30 samples.
Persisted as NodePrefs::gps_avg_idx (schema 0xC0DE0016): struct field +
option table, DataStore rd/write/clamp in lockstep. sizeof unchanged (the
uint8_t fits existing tail padding) so the 2488 tripwire still holds.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The onContactRemoved/onChannelRemoved hooks already clear every NodePrefs
field keyed on a contact pubkey or channel index (verified complete), but the
convention was opt-in with no reminder — new per-entity state could silently
forget to register, the class of bug fixed earlier this session.
Add a CONTRACT comment above each hook listing what it covers and instructing
additions to land there, plus a terse [del->onContactRemoved] /
[del->onChannelRemoved] tag on each of the eight keyed fields in NodePrefs.h.
Now editing either side (struct field or hook) points at the other. Comments
only; no behaviour change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
NodePrefs is written/read field-by-field in DataStore::savePrefs/loadPrefsInt;
the on-disk format is the struct's field layout, with nothing checking that the
two hand-written sequences still match the struct. A forgotten read/write
silently misaligns every later field — the highest-blast-radius convention in
the codebase.
Add a static_assert on sizeof(NodePrefs): changing a data member trips it with
a checklist (sync save/load, clamp on load, bump SCHEMA_SENTINEL, update the
size). A manual checkpoint, not a proof, but it turns silent drift into a build
break. Size is variant-stable (all arrays sized by NodePrefs' own constants),
verified on both nRF52 boards.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Squash merge of feat/location-beacon-alerts-autopause (v1.21).
Features:
- Live Location Sharing — broadcast position as movement-gated [LOC]
messages to a channel or contact; live shares show as map pins with
distance/bearing in Nearby Nodes and a status-bar indicator. [LOC] is
parsed in DMs, channel messages and room messages; DM shares name the
sender.
- Locator (geofence) — arm a geofence around a saved waypoint or a person
(live [LOC] or last-known position), alert on arrive/leave or near/far,
with an optional homing beeper (gated to arrive/both modes). Arm from
Tools > Locator, Nearby Nodes, or Waypoints; target picker lists
favourites first, clearable via a "None" entry. Active target is drawn
as a flag on the map.
- One active target shared across Locator / Navigate / Map via a single
resolver (resolvePersonPos / activeTargetPos) that prefers a live
[LOC] share over the last-advertised GPS fix.
- Follow live contacts — Navigate to a live-sharing contact follows them
as they move and adds an ETA line; quick-share your own position from
the Map.
- Map & status-bar upgrades — home mini-map gets a north marker, scale
tick, and a connected trail line (was disconnected dots); status line
shows tracked-node count, an arrow + distance to the active Locator/Nav
target (falling back to the nearest live-tracked contact); GPS fix icon
in the top status bar, shown only on GPS boards with GPS enabled.
- Trail auto-pause — recording freezes on stops (banking elapsed time,
breaking the map line across the idle gap) and resumes on movement
without ending the session.
- Streaming trail simplification — GPS points are simplified in-stream
via a fixed-corridor (Reumann-Witkam) pass tuned for fidelity: straight
runs collapse to their endpoints, curves stay bounded to the Min-dist
tolerance, so the 512-point buffer covers a far longer route than a
flat point budget would suggest.
- Collapsible Tools (Location / Comms / System sections, fold-in-place
like Settings) and page-indicator icons on the home carousel.
- Waypoint coordinate editor — add a waypoint by scroll-editing lat/lon
digit by digit.
Fixes:
- Critical: low-heap hang and contact loss on RAM-tight builds. Halved
message-history scrollback rings (recovering ~14 KB free heap) and
made contacts/channels/prefs persistence atomic (temp file + rename),
so an interrupted save can no longer corrupt or wipe the store.
- Serial.write() bounded so a stalled USB host can't hang the device.
- Nearby Nodes: live [LOC] senders respect the type filter, sort by
shared position, and the list refreshes so live shares bubble up.
- Map: live contacts are labelled before waypoints.
- GPS status icon hidden when GPS is off in Settings.
- Splash screen no longer truncates a pre-release tag's own dash (e.g.
v1.21-rc1) when stripping the build's commit-hash suffix.
- Null-guarded the Locator target picker; clamped loc-share channel
index on load.
Under the hood:
- -Os size optimisation on the e-ink and GAT562 30S solo envs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
isValidRepeaterProfile() hard-coded the 150-960 MHz SX1262 range, which
would wrongly reject legal frequencies on any other chip. Take the freq
bounds as parameters and pass radio_driver.getFreqBounds() at both call
sites (repeaterProfileValid() and the load-time migration), so the chip's
own validated range is the single source of truth. DataStore.cpp gains a
target.h include for radio_driver (declared extern there).
DigitEditor::render() now zero-pads the integer part to int_digits: the
cursor addresses place values (100/10/1/0.1…), so a value with fewer
integer digits than int_digits would shift every glyph and misplace the
highlight. No visual change for the frequency field (always 3 digits).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the repeater filter knobs from "politeness" to "forwarding
filters" across code comments, FEATURES.md and the docs, and correct
references that hadn't followed the controls when they moved from
Settings › Radio to the dedicated Tools › Repeater screen.
Comment/doc accuracy fixes:
- NodePrefs: user_radio_presets are now written by both Settings and
Repeater (shared picker), not Settings only.
- DiagnosticsScreen: class header listed only some rows; spell out the
full set (forwarded, signal, pool/queue, error flags, reset gesture).
- RepeaterScreen header no longer claims to show live forwarding stats
(they live on Diagnostics).
- tools_screen.md: drop the stale paragraph claiming the Repeater screen
shows live stats at the bottom — it is config-only.
Comments/docs only; no behaviour change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings > Radio gains a repeater toggle, 16 community-suggested radio
presets plus manual Freq/SF/BW/CR tuning (digit-by-digit Freq editor),
4 persisted user preset slots, and the packet pool bumped 16->32 so
queued retransmits stop starving incoming-packet allocation while
relaying.
Four opt-in politeness knobs (skip-advert, max-hops, yield, min-SNR),
all flood-only and off by default, plus overhear suppression that
cancels a queued retransmit if a peer relays the same packet first.
Adaptive Power Control is suppressed while relaying (pins TX power to
the ceiling) and duty-cycle RX is forced off, since a repeater needs
to hear and relay at consistent power.
A dedicated Tools > Repeater screen consolidates the toggle, the
politeness knobs, and live forwarding stats, plus an optional "Custom"
radio profile — a dedicated frequency/SF/BW/CR for relaying, separate
from the companion's own network, band-matched to the companion
frequency by default and used everywhere a radio change can happen
(boot, on-device toggle, app-driven CMD_SET_RADIO_PARAMS, Settings
radio edits) so the device never silently falls back to the wrong
params mid-relay.
Diagnostics gains the actually-forwarded packet count, real heap-free
via mallinfo(), a reset-counters popup, and hardened loop-detect
bounds. Also: a frequency-floor fix and a float-equality preset-match
fix in the repeater profile logic, deduped BW-table/valCol/profile-
seeding helpers shared between Settings and the Repeater screen, and
a build.sh fix tolerating control characters in `pio project config`'s
JSON dump.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reply-bot overhaul on top of the trigger/reply auto-reply:
Robustness
- single botTriggerMatches() shared by DM/channel paths; named constants
(BOT_REPLY_COOLDOWN_MS / BOT_SCRATCH) replace magic numbers.
- per-contact DM throttle (8-entry ring) so a second sender isn't starved
while one contact is on cooldown.
- channel anti-loop: skip only when an incoming message equals our own reply
(was: any reply containing the trigger word — which silently killed channel
replies for the common "trigger word in reply" setup).
Features
- away / reply-to-all: a lone "*" trigger matches every message.
- independent DM vs channel triggers (bot_trigger / bot_trigger_ch); "*" works
on the channel too, bounded by cooldown + echo guard.
- query commands: a DM or monitored-channel message is scanned for "!word"
tokens — !ping/!batt/!loc/!time/!temp/!hops/!status/!help — merged into one
combined reply. DM = per-contact throttle, ignores quiet hours; channel =
broadcast, per-channel cooldown, respects quiet hours. !hops uses
getPathHashCount() (0 = direct).
- quiet hours (bot_quiet_start/end, local, wraps midnight) silence push replies.
- reply counter shown in the BotScreen header.
UI / storage
- BotScreen: 9 rows, scrolling list (no more cramming), field I/O via
fieldBuf()/fieldCap().
- prefs bot_commands_enabled / bot_quiet_start / bot_quiet_end / bot_trigger_ch
persisted; schema 0xC0DE000A → 0xC0DE000C with clamping + migration
(bot_trigger_ch seeded from bot_trigger on upgrade).
- docs: tools_screen bot section rewritten; FEATURES.md refreshed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
End-to-end delivery indicators on the device UI, drawn next to outgoing
messages and auto-scaled to the font (legible on landscape e-ink).
DM (and room servers, which share the DM path):
- Pending / delivered / failed marker driven by the real end-to-end ACK.
Pending shows a row of dots — one per send — so auto-resend progress is
visible before it resolves to ✓ / ✗.
- Auto-resend: new pref dm_resend_count (0-5, default 2), Settings ›
Messages › Resend. A pending DM whose ACK times out is re-sent (reusing
the original timestamp) until resends run out, then ✗. Driven from
UITask::loop so it completes in the background, independent of screen.
- Incoming dedup: a retry reuses the sender timestamp + text but carries a
fresh packet hash, so addDMMsg drops copies matching prefix+ts+text.
Channels (flood, no recipient ACK):
- ✓ only once a repeater echo confirms the send was relayed into the mesh;
no echo is normal, not a failure (no pending/fail shown). A small ring
tracks a burst of sends so each matches its echo. Receive-path hashing is
gated so the hot flood path is untouched when idle.
Shared:
- Markers shown in both the history list and the fullscreen message view.
- Reusable scalable mini-icon facility in icons.h (bitmap + auto-scale);
adding a new status icon is a bitmap plus one draw call.
No changes to the upstream mesh library (src/).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two independent, default-off toggles under Settings › Radio.
Pwr save: hardware RX duty-cycle (SX126x SetRxDutyCycle via
startReceiveDutyCycleAuto). The chip cycles RX↔sleep and wakes on a preamble —
no MCU state machine; recvRaw reads the packet exactly as in continuous RX.
Falls back to continuous RX on non-SX126x. (Replaces an earlier software-CAD
state machine that fought the hardware: polling a warm-sleeping chip gave a
phantom-busy channel that stalled TX ~4 s and dropped ACKs in the scan gaps.)
Auto pwr: Adaptive Power Control. tx_power_dbm becomes a ceiling; actual TX
power tracks the reverse-link SNR margin (measured above the per-SF demod floor,
EWMA-smoothed, proportional step with a deadband). Feedback comes from direct /
room-server ACKs and, for channels (no ACK), from hearing a repeater rebroadcast
our own flood; a lost confirmation ramps power back up so channel sends can't get
stranded below what the repeaters can hear.
Prefs schema 0xC0DE0009 (rx_powersave, tx_apc). Radio page / name bar show the
live TX power; noise floor reads n/a while duty-cycling.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Follow the global Units preference in the two remaining Trail distance
spots that were still metric-only:
- Min dist gate: the index is now a unit-agnostic level (0=finest..3).
Metric stays 5/10/25/100 m; imperial uses round 15/30/75/300 ft (applied
as their metre equivalents in the sampling gate).
- Map scale grid: imperial mode uses round ft/mi steps (10 ft … 100 mi)
instead of metric steps with a converted label. Step storage moved to
float metres so sub-metre imperial steps keep their geometry; labels come
from a parallel table so the scale bar reads an exact round value.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a single "Units" choice (Settings › System: Metric / Imperial) that
governs every distance and speed shown in Tools — Nearby Nodes, the Trail
views, and the navigate-to-point screen.
- NodePrefs: units_imperial (global) + trail_show_pace (Trail readout mode),
schema bumped 0xC0DE0005 → 0006. The old combined trail_units_idx is kept
for file-layout stability but no longer drives anything; upgraders default
to metric + speed.
- geo::fmtDist gains an imperial mode (ft below ~1000 ft, then miles).
- NavView / Nearby / Trail (waypoint list, Summary distance, List deltas,
map scale-bar label) all format through the global preference.
- Trail's action-menu "Units" row becomes a Speed/Pace readout toggle; the
km-vs-mi unit now follows the global setting instead of being one of four
combined options.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add per-channel favourite marking and a Settings filter (all/fav) for
the channel list, symmetric with the existing DM and Room filters.
NodePrefs:
- ch_fav_bitmask (uint64_t): bit i = channel i is marked favourite
- ch_fav_only (uint8_t): 0=show all channels, 1=favourites only
- SCHEMA_SENTINEL bumped to 0xC0DE0005
DataStore: save/load both new fields before the sentinel.
SettingsScreen: new CH_FILTER item ('Channels: all/fav') in the
Contacts section, positioned between DM_FILTER and ROOM_FILTER.
QuickMsgScreen:
- buildChannelList() skips non-favourite channels when ch_fav_only=1
- Channel context menu gains a 4th option 'Fav'/'Unfav' that toggles
ch_fav_bitmask for the selected channel and rebuilds the list
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Second row in the Config view: UP/DOWN moves focus between Min dist
and Units, LEFT/RIGHT cycles the focused row's value. Units propagates
to the Summary view, which now shows either "Avg: N km/h" / "N mph"
or "Pace: M:SS /km" / "/mi" depending on the choice.
Pace renders as "--:-- /unit" when distance or elapsed time is zero
(avoids divide-by-zero glitches with one-point trails). mph conversion
uses the 0.621371 ratio with rounding; pace works in floating point
off raw metres and seconds for accuracy at low speeds.
NodePrefs gains trail_units_idx as another reserved-ish byte; old saves
load with 0 = km/h, no schema bump needed since the rd() lambda already
defaults missing fields to zero.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
GPS NMEA polling is cheap, and a slower cadence just hides motion from
the trail; the min-delta gate already filters jitter without throttling
the GPS. Both knobs that exposed cadence-style controls to the user are
removed:
- Trail sampling is fixed at TrailStore::SAMPLING_SECS = 1 s, matching
the sensor manager's built-in GPS update default. The
intervalSecs / intervalLabel / INTERVAL_COUNT helpers go with it.
- GPS update rate ("GPS upd" entry) leaves the sensor manager on its
built-in 1 s default. applyGPSInterval and the GPS_INTERVAL_OPTS /
LABELS tables / gpsIntervalIndex helper are deleted.
Both NodePrefs fields (gps_interval, trail_interval_idx) are retained
as reserved so the schema sentinel doesn't have to bump — older saves
load cleanly, the bytes are just ignored.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds Tools › Breadcrumb. Enter on the screen toggles tracking; while
active, UITask::loop samples GPS at the cadence chosen in settings
(default 1 min) and drops the point into a 256-entry RAM ring guarded
by a min-distance gate (default 25 m). A "G" indicator joins "A" in
the status bar with the same blink convention.
New storage:
- examples/companion_radio/Breadcrumb.h — BreadcrumbStore class
- 256 × 12 B = 3 KB RAM (survives auto-off, lost on reboot — explicit
flash-slot save comes in phase 4)
- Haversine min-delta gate, total distance, elapsed seconds, current
km/h, bounding-box helper
New screen:
- examples/companion_radio/ui-new/BreadcrumbScreen.h — Summary view
with Status, Points, Dist (m or km), Time (h:mm), Speed; Enter
toggles tracking, Esc returns to Tools
Schema bump 0xC0DE0002 → 0xC0DE0003 for two new NodePrefs bytes:
breadcrumb_interval_idx (1min default) and breadcrumb_min_delta_idx
(25m default). Older saves leave both at zero, which matches the new
defaults. DataStore::loadPrefsInt/savePrefs read/write the pair.
Logging on/off is a runtime flag inside BreadcrumbStore — not a
preference — so reboot returns to the off state cleanly; the user
will be able to persist a snapshot to a slot in phase 4.
Phase 2 (map view), 3 (point list), 4 (slot save/load, GPX export over
USB), and 5 (settings UI) follow incrementally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New home page rendering 6 pinned-contact slots. Grid transposes to
orientation: landscape → 3×2, portrait → 2×3. Joystick claims UP/DOWN
and inner LEFT/RIGHT for grid nav; edge LEFT/RIGHT fall through to
page navigation. Selected tile inverts via drawSelectionRow, filled
tile shows contact name + unread badge, empty tile shows "+".
Storage:
- NodePrefs::favourite_contacts[6][6] (6-byte pub_key prefix per slot,
all-zero = empty; collision probability with a real key is 2^-48)
- HomePageBit gains HPB_FAVOURITES = 11 (HPB_COUNT = 12), with a new
HP_FAVOURITES mask bit so the page is toggleable in Settings
- New PAGE_ORDER_LEN constant decouples the persisted array length (11)
from the page-type count; loops over page_order now use it, value-range
checks still use HPB_COUNT
- homePageBit returns 0 for HPB_SETTINGS / HPB_QUICK_MSG explicitly
rather than by bit-index range, so HPB_FAVOURITES (bit 11) is correctly
treated as toggleable
- Default order inserts FAVOURITES after CLOCK; SHUTDOWN drops to the
fallback "missing pages" append (still reachable, lands at end)
Schema sentinel bumped to 0xC0DE0002. DataStore::loadPrefsInt and
savePrefs read/write the new field. Older saves leave the field
zero-initialised (all slots empty), which is the natural starting state.
Phase 2 (Pin from Contact options) and Phase 3 (Pin from empty-slot
mini picker) wire interactions; this commit handles render + nav only.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
pageBit/bitToPage in HomeScreen and homePageBitIndex in SettingsScreen
each spelled out the bit assignment with magic numbers 0..10. Lift the
numbering into a NodePrefs::HomePageBit enum (HPB_CLOCK … HPB_QUICK_MSG,
HPB_COUNT) and route every reference through it: mapping functions, the
HP_* bitmasks, the homePageLabel table sizing, loop bounds over
page_order, the bounds check on page_order[0], the "always-visible"
discriminator for SETTINGS/QUICK_MSG.
Per-class enums (HomeScreen::HomePage, SettingsScreen::SettingItem)
stay — they index different concerns (navigation page vs. settings
row). The mapping functions still exist, but now reference a single
source of truth for the bit values.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Old saves (without sentinel) load unchanged — rd() lambda zero-inits
anything not on disk. New saves append a 4-byte sentinel that encodes
the schema revision; the low byte is bumped on every layout change in
loadPrefsInt/savePrefs. Mismatch on load logs a warning and continues
with defaults; the next savePrefs writes the current sentinel so the
file self-heals.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Previously page_order_set status was inferred from page_order[0] being
in 1..11, so a single junk byte in that range falsely triggered
custom-order mode. Add explicit page_order_set magic (0xA5) written
alongside the array; pre-magic saves are migrated once on load when
their first byte still passes the legacy range check.
Also fix(ui): keep "@[nick] " prefix out of placeholder expansion in
QuickMsgScreen reply path, so a nick containing a token like {loc}
isn't substituted.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add "Full rfsh" setting (e-ink only) with options off/5/10/20/30
partial refreshes between full refreshes. Prevents ghosting on panels
that accumulate artifacts after many partial updates.
GxEPDDisplay counts partial refreshes and calls display.display(false)
every N frames when the interval is set. Persisted in DataStore and
applied at startup via applyFullRefreshInterval().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add NodePrefs::joystick_rotation (0-3 steps CW), persisted in DataStore
alongside display_rotation. rotateJoystickKey() now takes a runtime rot
parameter instead of compile-time JOYSTICK_ROTATION macro. UITask::loop()
reads joystick_rotation from NodePrefs each frame. Settings screen exposes
"Joystick" rotation item on any build with UI_HAS_JOYSTICK. JOYSTICK_ROTATION
macro still works as compile-time default for legacy/non-prefs builds.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Resolved conflicts to preserve eink-ui layout helpers (valCol, lineStep, sepH)
while integrating the page_order persistence, buildVisibleOrder(), and
Settings/Messages ordering UI from the wio-tracker-l1-improvements branch.
display_rotation is now written before page_order in the save/load sequence.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
NodePrefs: add page_order[11] (1-indexed bit-index, 0=end/legacy).
DataStore: persist page_order appended after use_lemon_font.
UITask/HomeScreen:
- bitToPage(): maps stable bit indices 0-10 to HomePage enum values
- buildVisibleOrder(): respects page_order when initialised, else
falls back to default enum sequence
- navPage() and navigation dots use buildVisibleOrder()
SettingsScreen Home Pages section:
- Add Settings (bit 9) and Messages (bit 10) — show as "always"
- LEFT/RIGHT on any home page item moves it earlier/later in order
- ENTER toggles ON/OFF for pages that can be disabled
- Position number shown before label once custom order is active
- ensurePageOrderInit() seeds default order on first reorder action
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds Settings > Display > Rotation (0°/90°/180°/270°) that persists to
NodePrefs and is applied on startup. Falls back to compile-time
DISPLAY_ROTATION when the field is missing from an older prefs file.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add Lemon font (LemonFont.h, LemonIcons.h) to the standard build
alongside the Adafruit built-in font; ~101 KB added to flash
- SH1106Display: add _use_lemon flag + setLemonFont(bool) to switch
at runtime; print() and getTextWidth() use Lemon path when active;
translateUTF8ToBlocks() passes UTF-8 through unchanged (Lemon supports
full Unicode U+0020-U+04FF) vs transliterating for the default font
- DisplayDriver: add getCharWidth()/getLineHeight() virtuals (defaults 6/8);
SH1106Display returns 5/9 for Lemon, 6/8 for default; add setLemonFont()
no-op virtual; fix orphaned UTF-8 leading byte in drawTextEllipsized
- FullscreenMsgView: replace fixed-char-count word-wrap with pixel-accurate
wrap using display.getTextWidth(); use getLineHeight() for spacing so
Lemon (9 px) and default (8 px) both render correctly
- NodePrefs: add use_lemon_font field (0=default, 1=Lemon)
- SettingsScreen: add "Font" item in Display section (Default / Lemon),
calls UITask::applyFont() on change
- UITask: add applyFont() that calls display->setLemonFont(use_lemon_font);
called at startup (begin()) and when the setting changes
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Toggle in Settings > Display > Format. In 12h mode the clock shows
h:mm AM/PM (or h:mm:ss AM/PM with seconds, no space before AM/PM).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Long press Back starts lock sequence; 3 Enter presses within 3s toggle lock
- Locked screen wakes for 5 seconds on any key, showing clock and unlock hint
- Incoming messages do not wake the display while locked
- Auto Lock setting in Display section: locks automatically when screen turns off
- Lock state persisted in UITask; NodePrefs gains auto_lock flag
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
