- ui-lvgl: navTextEntry()/TextEntry replace eight copies of popup + field +
keyboard wiring; one byte-capped insert callback instead of two.
- ui-new: drawHeadedBubble()/BubbleMark replace the duplicated DM and channel
bubble drawing in MessagesScreen.
- GpsSky::halt(): stopping the receiver ends an unfinished search but keeps
the first-fix time; keyboard cursor blink restarts after a key.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
- GPS: stop() resets the sky state so the 'Searching' timer does not run
while the receiver is off; the status page shows it only when GPS is on.
- L2 keyboard: put the FOCUSED state back after typing a key or picking a
variant, so the cursor is drawn again after characters like a-ogonek.
- Quick panel: drop the full-screen dim (a blend per frame), so the screen
below stays interactive; tiles are one sideways-scrolling, snapping row;
the brightness slider no longer animates and only updates the backlight
when the value changes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
The L1 e-ink solo build splits in two, one per screen shape, so each
screen can be laid out for a single shape. Settings > Rotation now only
turns the screen upside down, and the joystick turns with it.
Landscape writes in misc-fixed 8x13 at the panel's own resolution
(EINK_LARGE_FONT); portrait keeps the 6x9. All drawing moves into
EinkGfxDisplay, which the panel driver and the simulator share; the
FreeSans fonts and the CRC32 library go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-core: Diagnostics::systemLines, NearbyModel::typeShort,
rptctl::currentPresetName, RoomSessions::pendingKey, settings::isSwitch,
UiCore::reconcileDMUnread.
- ui-new: the retired Recent page, fmtAlt, the battMvToPercent wrapper,
setFavouriteChannelSlot, AccordionList onHeader/visibleCount, drawBoxedIcon
and seven unused icons; info::row folded into info::valueRow.
- ui-lvgl: onOpenNav, TileDownloader::withTrails; the trail header size is
one constant (TRAIL_HDR) for live and saved trails.
- Home quick panels save prefs only when a value changed.
- Comments brought in line with the code (status bar reserve, settings rows,
page order, SH1106 frame skip, UiCore header).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DisplayDriver gains slideBegin()/slideCompose(): the driver keeps the frame
on screen and, in the next one, moves it out while the new rows follow.
SH1106 does it on its 1 KB buffer (+1 KB RAM for the copy), the sim on its
canvas; drivers that can't read their frame back keep cutting over (e-ink).
Home slides the content below the page-icon row in 220 ms with an ease-out
(the whole screen to and from the header-less clock), and the current-page
pill glides between icons.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Splash: the L2 wordmark and lettering, shared through ui-core/Lettering.h,
rise in with loading dots under the version line (static frame on e-ink).
- Home: the header shows the time once the clock is set; icon pages carry
only their title. One 32 px icon family (3 px strokes) bobs 2 px over a
dithered blob shadow that shrinks as it rises; the unread badge rides on
the Messages bubble; Bluetooth off is the icon at half density.
- Soft corners on every selection, the page pill, tabs and popups;
dotted scrollbar track with a rounded thumb; the tab bar lays out whole
tabs and shows edge arrows only in free space.
- DM bubbles drop the sender row and wrap to a second line, with the
delivery mark and age closing it.
- Keyboards name what is typed (channel, contact, Password, Scope...)
and show characters left near the limit; PIN entry has its own preview.
- Loading dots for waits (login, scan, GPS) and signal bars in place of
raw RSSI in Nearby.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DisplayDriver gets drawSoftRect / fillSoftRect / drawPanel (the unread badge's
corner knockout; a panel also clears a 1 px moat so lines below stop short of
its border). Used by alerts, popups, the accent picker, the lock hint, chat
bubbles and the send button.
Fixes: no "Msg:" toast for a message landing in the open thread; Nodes scan
text fits the screen; the PIN pad skips the blanks beside 0; Auto-Advert is a
plain value row; the Admin picker says what it needs when empty; the GPS page
shows "-" instead of 999 before a first fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each frame is hashed per 32-column block of each 8-px page and only changed
blocks go over I2C. A full frame was 1 KB / 31 ms on every change; a moved
selection, a scrolling name or a clock tick is now 1-8 ms. 128 B of hashes,
no frame copy; full sends stay for wake/clear and SPI panels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- CPU at 80 MHz with the screen on after 2 s without touch or animation;
a touch restores the full clock before its frame is drawn
- setText(): periodic refreshes no longer redraw unchanged labels
(status bar, Home, lock, Diag, GPS, compass, clock, map, nav, nearby)
- map markers kept across the 3 s rebuild when unchanged
- app connected: the loop blocks until a BLE frame arrives
(serialFrameArrived / hasPendingFrames) instead of polling every 2 ms
- PSRAM: boot frame sprite and the HTTP response buffer released
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Working plans (docs/development, docs/design redesign notes) removed; the
two developer guides moved to docs/developer/. README cut to devices,
flashing, links and building (Wio Tracker L2 added); its feature list and
doc tables moved to docs/solo_features/README.md. RELEASE.md describes the
Solo release flow. Upstream's GitHub Pages workflow (docs.meshcore.io)
dropped, CLAUDE.md untracked, Buy Me a Coffee back in FUNDING.yml.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two views, swapped with left / right: a polar sky plot (filled = used in the
fix, hollow = tracked, a pixel = no signal) beside fix, used / in view, HDOP,
PDOP and time to first fix; and a signal bar per satellite (used first, a
dotted 30 dB-Hz line) under per-constellation counts. The GPS stays awake
while it's open. Data from GpsSky (-D GPS_SKYVIEW, now on the L1 solo build).
The simulator's made-up sky moves from the L2's GpsScreen into
helpers/sensors/GpsSkySim.h, so both sims show it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
helpers/esp32/InternalFS.h picks the filesystem: -D ESP32_LITTLEFS mounts
LittleFS on the same "spiffs" partition, otherwise SPIFFS as before. Only the
L2 LVGL envs set it; every other ESP32 board is unchanged. A settings save
drops from ~0.5 s to ~80 ms and the files survive power loss mid-write.
No migration: the first boot formats the partition (fresh identity).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While nothing is connected, every 5 s: if advertising has stopped (a host
reset ends it with no disconnect to restart it), start it again. A link up
for 60 s without pairing is dropped, so advertising comes back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- BLE (ESP32): fast advertising (20-30 ms) for 30 s, then 152.5 ms, as the
nRF52 interface; the library default kept 30-60 ms forever
- Live map tiles: the WiFi drops after a minute with nothing missing
- ES8311 to standby while the I2S clocks are off, set up again before the
amp comes on
- Buzzer: no channel (DMA out of memory) waits out the samples instead of
spinning above the UI loop
- OTA: the image header check waits for its 16 bytes
- Comments: P10 is just the LED; the LCD SPI clock is 40 MHz on the wire
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The speaker's I2S channel was only disabled when idle, which leaves MCLK
running. Its fractional divider (160 MHz / 39 1/16 = 4.096 MHz) makes a
comb of lines every 256 kHz: one at 869.632 MHz, in the EU narrow mesh
channel, lifted the LoRa noise floor from ~-102 to ~-85 dBm, and others
land near GPS L1 and BeiDou B1. The channel is now deleted and its pins
held low after each sound, and made again for the next one. Measured:
noise floor -102 dBm, outdoor first fix 87 s (was 620 s and more).
Also: TCXO at 3.0 V (the L2's part, as Meshtastic has it); GLONASS
enabled on the L76K after each power-up; begin() on a running receiver
no longer resets it (a reset threw away the acquisition in progress).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Home > GPS and Settings > System > GPS details: satellites on a sky plot
(filled = used in the fix, colour = C/N0), a bar per satellite with its
dB-Hz, fix state with time to first fix, DOPs, position, altitude, speed,
UTC and per-constellation counts; a Turn on button while GPS is off
- helpers/sensors/GpsSky.h parses GSV / GSA / GGA / RMC from any talker,
fed from MicroNMEALocationProvider behind -D GPS_SKYVIEW (L2 and the
sim only; L1 unchanged); the sim feeds it made-up NMEA
- Roadmap: GPS indoors diagnosed with it - on the USB cable the L76K
tracks satellites but never decodes navigation data; on battery it
gets UTC within seconds and a fix
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Message history archived per conversation on the SD card (HIST_ARCHIVE):
restored on boot, Older/Newer paging in threads, kept count selectable
- Settings > System > Storage: card and flash usage, breakdown by maps,
messages, trails and other, kept-per-chat setting, delete history;
reads the mounted volume and warns when the FAT partition is much
smaller than the card
- Saved trails on the card: every Save is a new file, Load opens a list
with load (framed on the map), GPX export and delete
- Diagnostics: GPS data rows, last start reason, last crash summary
- Messages restored before the clock is set show their date instead of 0s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- New env Wio_Tracker_L2_companion_solo_lvgl_v3 on pioarduino 55.03.312-1;
the 2.0.17 env stays until the new one passes the hardware checklist
- SerialBLEInterface: NimBLE variant (PIN pairing through encrypted,
authenticated characteristic properties; setAccessPermissions is a no-op)
- buzzer: i2s_std driver on IDF 5 (legacy driver kept for 2.0.17)
- ESPNOWRadio: IDF 5 callback signatures
- ui-lvgl: psramBuf() for trail drawing, tile cache, map marks, list rows,
keyboard maps and message metadata; internal heap back to 2.0.17 level
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- genericBuzzer I2S path (BUZZER_I2S): an audio task synthesises the notes
with eased edges and keeps the DMA queue fed with silence between sounds;
ES8311 setup; amp powered through the board only around sounds
- ui-core/SoundControl.h (mode, volume, built-in sounds, melody model),
SoundNotifier moved to the Core, chanctl::melody, schema Sound page
- L2: notifications, alarm / timer ring, locator sounds, Settings > Sound,
melody editor with the playing note lit, per-chat sound, mute icon
- noteIndex() on every buzzer backend; scrolling popups past screen height
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- FEAT_RX_POWERSAVE lived in MyMesh.h, but SettingsScreen.h only pulls
Features.h -- it saw the flag only via include order, and an undefined
macro in `#if` silently reads as 0, which would split the build the day
it's flipped to 1. Now defined in Features.h (the home of FEAT_* flags),
which MyMesh.h includes; comment/doc pointers updated.
- Changing Live Share's "Stop after" restarted the whole session, forcing
an immediate re-announce [LOC] although the position hadn't changed. It
now restarts only the duration clock (restartLocShareClock()).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GxEPD2 polls the panel's BUSY pin for the whole refresh (up to ~1-2s),
stalling the main loop. A TX finishing in that window left the SX126x in
standby -- deaf -- until the refresh ended; packets received meanwhile could
be lost (only the latest is readable, and a later CRC failure rejects a good
one still pending). Hook GxEPD2's busy callback to finish TX / drain RX into
a small staging queue and re-arm right away, without touching dispatch/UI.
Wired only where the display driver supports it (GxEPD2: the two e-ink Solo
boards); OLED and sim builds are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DM and channel history each live in a fixed-size ring (32 DM / 48
channel entries). A conversation that outpaces reading can fill its
ring, evicting the oldest entries — including unread ones that were
never opened — so the unread badge silently caps at ring capacity
instead of reflecting how many messages actually arrived.
MessageHistory now tracks a sticky per-channel overflow flag, set at
the exact point an unread channel entry gets evicted (mirroring the
existing unread-decrement logic) and cleared once the count reads back
down to 0. DMUnreadEntry gains the same bit for DM contacts, detected
by comparing the raw per-contact counter against actual ring occupancy
on each new message (the DM ring, unlike the channel ring, doesn't
proactively decrement on eviction).
DisplayDriver::drawUnreadBadge/unreadBadgeWidth/fmtBadgeCount take an
optional overflow flag (default false, existing call sites unchanged)
that appends "+" to the badge. Wired into every place an unread count
is shown: DM/favourites and channel lists, the DM/Channels/Rooms
mode-select screen, favourite tiles, and the aggregate "Msgs" field on
the clock and lock dashboards plus the Messages home-carousel page.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Field report: a user on the stock SF8 "EU/UK (Narrow)" preset saw reception
drop from ~1-5 msg/min to ~1/3h with Pwr save on, unaffected by a better
antenna. Root cause, confirmed against the SX1262 datasheet and RadioLib's
own maintainers (jgromes/RadioLib#1597, closed as inherent chip behaviour):
the SX126x's duty-cycle preamble detection needs the sender's actual
preamble to closely match what we've configured our receiver to expect.
A mismatch — e.g. a repeater still on pre-v1.16 firmware sending 16 symbols
against our 32 — doesn't cost a little sensitivity, it silently drops every
packet from that sender regardless of signal strength. There's no local
parameter fix: shortening minSymbols to tolerate shorter preambles directly
shortens the wake-window's correlator dwell time, trading the preamble
mismatch failure mode for a marginal-signal one instead. Checked whether
IoTThinks' MeshCore fork solved this differently — it doesn't hit the
problem at all, because its "power saving" only light-sleeps the MCU on the
radio's own GPIO interrupt and never touches RX duty-cycle.
examples/companion_radio/MyMesh.h now defines FEAT_RX_POWERSAVE 0, gating
out the Settings row, the Diagnostics RXPS watchdog row, and every call site
that would apply rx_powersave to the radio or CAD auto-enable — including
forcing setPowerSaving(false) unconditionally so a stale rx_powersave=1 byte
from before this change can't do anything either. The real duty-cycle
implementation in RadioLibWrapper/CustomSX1262Wrapper is left in place,
unneutered, for if a network-wide compatibility mechanism (e.g. the
still-unused ADV_FEAT1/FEAT2 advert bits) is ever built to make it safe.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
95e3cf26 raised LORA_TX_POWER to 30 for the GAT562 30S, but CustomSX1262 passed
it straight to RadioLib's begin(), whose setOutputPower() rejects anything over
22 dBm (ERR_INVALID_OUTPUT_POWER) -- so radio init would fail on that board.
With NUM_PA_POINTS/TX_GAIN_LORA defined, LORA_TX_POWER is a radiated power, not
a chip register value: init at register 0 and let RadioLibWrapper::setTxPower()
apply the real power through the curve right after (companion applyApc(),
repeater setTxPower at begin). Other boards are unchanged.
Verified by build (GAT562 30S companion + repeater, Heltec V3 repeater) and by
reading RadioLib's SX1262::checkOutputPower(); not tested on hardware.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
gat562_30s_mesh_kit has an always-on external PA rated at +30dBm, but the
firmware wrote tx_power_dbm straight to the SX1262 register (capped at 22),
so the app/CLI/UI never matched the real radiated power and couldn't ask
for more than 22 even though the hardware supports it.
Add a generic, macro-gated PA gain-curve resolution in
RadioLibWrapper::setTxPower() (the single choke point every TX-power path
already funnels through), reusable by any future board with a similar PA.
For this board, reuse the vendor-measured 869MHz curve from the open
upstream Meshtastic PR that added it for the same physical module
(meshtastic/firmware#11212): pick the lowest SX1262 setting whose measured
output reaches the requested dBm, clamped at the PA's saturation knee.
Bump LORA_TX_POWER/MAX_LORA_TX_POWER to 30 for this variant only -- the
other three GAT562 boards use the SX1262's own PA_BOOST (22dBm, no
external PA) and are unaffected.
Since a request below the PA's floor gain (14dBm) still radiates at that
floor, also make CommonCLICallbacks::setTxPower() return what was actually
applied, and have every setter (BLE CMD_SET_RADIO_TX_POWER, CLI "tx",
simple_repeater/room_server/sensor) persist and report that value instead
of the raw request -- so tx_power_dbm never silently disagrees with the
physical output in either direction.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
User report: a repeater path popup's short "?A1B2C3D4"-style hop tags
(often just a couple pixels over the box width) felt stuck rather than
scrolling, while longer names (Nodes list) already felt right after the
recent marqueeHoldMs() speedup.
Root cause: the swing marquee's hold applies uniformly regardless of how
much text is actually hidden. When only 1-2 codepoints overflow, the full
cycle is hold + a single, barely-there step + hold + step back -- nearly
all hold, for almost no new information revealed each side. New
marqueeHoldForSkip(skip_cp) scales the hold down (to 1/3 or 1/2) when the
computed reveal distance is small; longer overflows keep the full hold,
since there's real text worth pausing to read.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
release-notes.md was missing three shipped changes: the Msg-wake toggle +
all-home-pages default, the repeater advert-interval default (2min->6min),
and three Fixes (settings-persist-on-reboot, RTC bootstrap floor-not-
rollback, ESP32 diagnostics heap/stack).
marqueeHoldMs() reverted 1500/2500 -> 700/1200 (OLED/e-ink) -- the longer
hold made the swing-marquee's full reveal cycle too slow for long message
previews.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
BaseChatMesh::bootstrapRTCfromContacts() called setCurrentTime(latest+1)
unconditionally. The newest contact's lastmod proves the clock must be at
*least* that late -- it says nothing about it being any earlier -- so on
any node that already has a better time source (a board with a real RTC,
or the Emscripten sim whose SimRTCClock is backed by the host's wall
clock) this dragged a correct clock backwards to whatever timestamp
happened to be persisted alongside the contact list. Measured in the
sim: ~9s behind real time after every reboot, growing with how long the
previous session ran.
Also adds sim_test_sync_time(epoch_secs) next to the other
SIM_PLATFORM/__EMSCRIPTEN__ test hooks, so a host page can re-anchor the
RTC on every (re)boot. The clock is live state the real mesh writes to at
runtime -- a peer whose own clock runs ahead pushes ours forward, which
is right on a node with no better source and, with meshcore-solo-site's
cross-visitor relay, means one skewed visitor can drag everyone. On a
demo running on someone's computer, "reset the device" should also mean
"the clock is correct again".
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018iubftDmKNWmkNnhJRz8UH
genericBuzzer (src/helpers/ui/buzzer.h/.cpp) gets a third platform branch,
#elif defined(SIM_PLATFORM), alongside the existing NRF52 (direct PWM) and
NonBlockingRtttl paths -- purely additive, no changes to either real-hardware
branch. It reuses the NRF52 branch's already hardware-free RTTTL parser
(_parseHeader/_parseNext/_noteFreq, now shared via a widened guard) but
tracks (current frequency, note-end-time) instead of touching real PWM/timer
registers, advancing on plain millis() polling from loop() -- same
non-blocking shape UITask already drives every tick.
Wired into the sim build the same way every real board sets its buzzer pin
(-D PIN_BUZZER=<n> in build_flags/DEFINES; here it's a dummy sentinel since
there's no real pin, just something to activate the existing #ifdef
PIN_BUZZER guards in UITask.h/.cpp/SoundNotifier.h unchanged), plus two new
small UITask accessors (isBuzzerPlaying/buzzerFreqHz/buzzerVolume) and three
EMSCRIPTEN_KEEPALIVE exports so a host page can poll the buzzer's state.
Browser side: one Web Audio oscillator+gain per companion instance (index.html
single-instance; mesh.html per A/B, not R which is headless), created lazily
on the first real user gesture (AudioContext autoplay policy), polled every
20ms and mapped to the oscillator frequency/gain -- so every notification
sound, ringtone, alarm, and volume-blip that already worked on real hardware
now actually produces audio in the browser, unchanged at the call-site level.
Verified end-to-end with real RTTTL playback traces (not just "no errors"):
the startup jingle's exact note frequencies (C6/E6/G6) and a real DM-received
notification triggering the receiving instance's Web Audio gain node from 0
to its mapped volume and back, matching the actual "MsgRcv3" melody's notes.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Ports examples/simple_repeater to variants/sim/ (new sim_simple_repeater
native env + build_wasm_repeater.sh) and adds a JS "ether"
(variants/sim/web/mesh.html) that bridges two real companion_radio WASM
instances through a real simple_repeater instance in a strict A<->R<->B
topology (no direct A-B link), proving genuine relay routing rather than
a shortcut.
Also fixes multi-instance issues Phase 2's single-instance design never
surfaced: SimDisplayDriver's canvas context/id caching was keyed on a
single global instead of per-instance, and both wasm builds were missing
_malloc/_free/HEAPU8 runtime exports needed for the ether to poke bytes
into an instance's memory.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New board variant compiling the unmodified MyMesh/UITask/DataStore app
logic against real mesh::Radio/MainBoard/RTCClock/RNG interfaces, for
running the actual firmware outside embedded hardware:
- Native (plain g++, platform = native): ASCII-art display over stdout,
stdin-driven input, local-disk-backed DataStore/IdentityStore.
- Emscripten/WASM (variants/sim/build_wasm.sh, since PlatformIO's native
platform force-overrides any CC/CXX toolchain override back to system
clang++): canvas-backed display, IDBFS-backed persistence across page
reloads, JS-callable input via sim_enqueue_key(), emscripten_set_main_loop.
Real rweather/Crypto (AES128/SHA256/Ed25519) vendored unmodified and
proven working on both targets. variants/sim/web/index.html is a bare
verification harness, not the polished website embed.
DeviceDiag::getHeapStats()/getStackFreeBytes() only had an implementation
for NRF52_PLATFORM; every other platform fell through to the 0/0 stub, so
Diagnostics > Live showed "N/A" for Heap free and Stack free on ESP32
boards (Heltec v3/v4) -- exactly the boards where that number is most
useful to see. Added an ESP32 branch using heap_caps_get_free_size()/
heap_caps_get_total_size() (MALLOC_CAP_8BIT, matching the general-purpose
heap `new`/malloc() actually draw from) and the same
uxTaskGetStackHighWaterMark() call nRF52 already uses, since Arduino-ESP32
runs on FreeRTOS too.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The animated marquee that lets a selected row scroll into view instead of
truncating behind an ellipsis uses a small "is this the same text as last
frame" buffer, _marquee_text[64], compared against the current frame's
temp_str[256] via strcmp(). For any text at or past that 64-byte cutoff,
temp_str simply has more bytes than _marquee_text can hold, so strcmp
always finds a difference at the truncation point -- is_new evaluates true
on every single call, which resets _marquee_skip_cp and _marquee_phase back
to the start every frame. Short labels and names (what this was written
for) stayed under the cutoff and animated fine; a longer message-body
preview -- letting a message be read from the list without opening
fullscreen, an emergent use of the same feature -- got stuck holding at its
first frame forever.
Bumped _marquee_text to 256 to match temp_str/window's own cap in the same
function, so the comparison is exact instead of silently truncated. Static
+192 bytes on the one global DisplayDriver instance; verified against RAM
usage on all four build targets (all comfortably under headroom).
This lives in src/helpers/ui/, shared with upstream, unlike the rest of
this session's ui-new/-only work -- kept as its own commit.
Selecting a row whose ellipsized text overflows now animates a "swing"
marquee: holds at the start, scrolls to reveal the full tail, holds
there, then scrolls back and repeats. Unselected/non-overflowing text
is unchanged (still a static "..."). E-ink gets slower, coarser steps
(fewer, cheaper partial refreshes) than OLED; unchanged frames are
already skipped by the display's CRC diff, so idle holds are free.
Wired into every screen with a selectable row: home favourites, DM/
channel lists and message bodies, Settings, popup menus, Bot, Admin,
Nearby, Waypoints, Locator, Live Share, and the alarm screen.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
At the edge of BLE range the phone repeatedly drops and reconnects, and
each queued outgoing frame's write can block the main loop up to 100ms
(Bluefruit's notify() waits on a free HVN packet slot). The fixed 250ms
retry throttle re-triggered that blocking wait constantly during a bad
link, making the device feel almost unresponsive. Retries now back off
exponentially (250ms -> 2s cap) on repeated failure and reset on the
next successful send.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Settings > Radio > Scope: type a community/region name on-device (derives
the shared key the same "#name" -> SHA256 way as DEFAULT_FLOOD_SCOPE_NAME),
previously only settable from a connected app.
- Tools > Repeater > Scope only + Extra scopes: only relay flood traffic
matching the device's own scope or a comma-separated list of additional
scopes, without changing what scope the device's own messages send under.
No-op while unconfigured.
- getCADEnabled()/getInterferenceThreshold() were hardcoded off on
companion_radio; CAD now auto-enables whenever RX power-save (duty-cycle)
is active, since the noise floor isn't kept fresh during duty-cycle sleep.
- Message truncation to fit the send frame could split a multi-byte UTF-8
character in half; now stops at the last complete character.
- The default "Public" channel was unconditionally re-added at every boot
before the saved channel list was loaded, so deleting it never stuck.
Only seeded now on a genuinely fresh device (no channel file yet).
- Tools > Nodes read contacts from the wrong starting offset, landing on
internally-reserved bookkeeping slots instead of real contacts -- showed
as blank "Unknown" rows and silently dropped that many real contacts off
the end of the list.
- resetContacts() only cleared the first few reserved slots, not the whole
contact table, contrary to its own comment; only reachable today via
private-key import, fixed to match stated intent regardless.
- Keyboard's multi-line text preview could render the cursor on an empty
line below short typed text instead of right after it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Home key toggles the keyboard backlight but wasn't going through
checkDisplayOn() like every other TCA8418 key, so it couldn't wake a
sleeping display or extend the auto-off timer.
Also: removed a no-op #elif branch in ST7789Display.cpp (same values as
the #else it duplicated), and ENABLE_SCREENSHOT on the Cardputer ADV
solo env, which does nothing since ST7789Display has no getBuffer().
Two races between the new GPS duty-cycle scheduler and code that changes
GPS state independently of it:
- gpsDutyCycleLoop() capped every "GPS on" phase at a fixed 60s and would
stop_gps() as soon as a fix went valid, with no awareness of an
in-flight "!gps fix" bot request -- so a fix's own up-to-300s acquire
window (and its 10s averaging phase) could get cut short by the
scheduler shutting GPS off mid-request. MyMesh::isGpsFixPending() now
feeds into UITask's existing "is anything live using GPS right now"
hold, alongside trail/live-share/locator/nearby.
- setSettingValue("gps", ...) (Settings toggle, bot !gps on/off, CLI)
starts/stops GPS directly without resetting the scheduler's own phase
timer, so a manual toggle could land on a stale, already-expired
deadline left over from before -- immediately re-stopping GPS a tick
after turning it on. The phase timer now resets on every external
change, so the next duty-cycle tick re-arms fresh.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.
Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.
Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.
Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude
JakubandClaude Opus 5.5
MarekZegare4
Scott Powell
taco