Contacts and rooms, the scope list, discovery and ping, APC and
screenshots move out of MyMesh.cpp to headers included at its bottom,
as MyMeshBot.h and MyMeshCli.h are, so upstream merges meet less of our
code. The feature matrix gains the 4.26" in its layout tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pure move: each block now sits in its own header, included where its
code was, so the order of definitions is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WioTrackerL1Eink426_solo_dual extends eink_solo like the 4.2" build and
sets only what differs: the panel, rotation, the 9x15 at 2x with Text and
Icon size, bulk writes at 8 MHz, 250 contacts and a 32-message queue.
Replaces the full copy of the flags in solo/wio-tracker-l1-gdeq0426/.
Docs: advert precision, text and icon size, the 4.26" in the feature matrix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nodes: telemetry permissions per contact, reset path, share nearby
(L1 options menu; L2 node card with "Can ask for" switches)
- Settings > Privacy: fixed position (typed in, from a waypoint, cleared)
and the Bluetooth PIN; Settings > System: factory reset, asked twice
- Companion CLI (CMD_RUN_CLI_COMMAND 66 / RESP_CODE_CLI_REPLY 29, as
upstream; FIRMWARE_VER_CODE 14): upstream's command names plus a key for
every schema setting (get / set / keys)
- Screenshots move to 0x7E; tools/screenshot.py falls back to 66 / 29
- Your contact as a QR code (meshcore://contact/add): Status > System on
ui-new, Settings > About on the L2; Nayuki's qrcodegen made header-only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Settings schema gains Privacy (position in adverts, who can ask for
status / location / sensors), Adding contacts (all or by type, max
hops, replace oldest) and Advanced radio (path hash size, double ACK,
listen before talk, interference threshold, RX boost, RX delay,
airtime factor); both UIs build their rows from it
- Auto-advert carries position only when Position in adverts is on
- ui-new accordion holds 16 sections and 128 rows
- docs: settings, tools, feature matrix
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new: Status › System, Enter shows it full screen. L2: Settings › About.
One precomputed 25 x 25 matrix (ui-core/SiteQr.h) for both, so no QR
library; the URL in upper case keeps it at version 2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nearby › Map (ui-new): the positioned nodes and you on one view, scaled
to fit, with north, a scale bar and the selected node's name and
distance; Left / Right picks a node, Up / Down zooms on it, Enter opens it.
- Clock tools › Calendar (ui-new): the month with today and the alarm's
days; a tight grid on small screens, Left / Right pages the months.
- L2 Settings: a Message banner switch (on / off) in place of ui-new's
three-way alert setting.
- Simulator: sim_nodes() puts eight positioned contacts around Kraków.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The cursor marks the character it stands before instead of pushing the
text apart: underlined while typing, an inverted block while moving it.
The grid stays on screen with the special row turned into the key hints;
Up/Down move a word, Hold-Enter deletes before the cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both UIs: a channel, DM or room with unread messages opens on the oldest of
them (MessageHistory::firstUnreadChannel / firstUnreadDm, own messages not
counted), a "New" line above it, so it reads down to the newest. Nothing
unread: the newest, as before.
L1: the first unread is selected and scrolled up top with the line in view;
the channel's unread count now counts down as you read towards the newest.
L2: the page holding it, scrolled to the line; an incoming message scrolls
down only when the list is already at its end. Sim hooks: sim_unread (L1),
sim_open("unread") (L2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display > Message alert: Normal keeps the sliding banner; Compact shows an
envelope with the unread count beside the battery (in the header line where
there's no status row), blinking for 2 s; Off shows nothing. The blink only
ever brings the next frame earlier, so it no longer holds back the UI's
animations while it runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The quick panel, as a phone's: pulled down from the status bar (or a tap
on it). Bluetooth, WiFi, GPS, sound, trail and live share switch at a
tap; Advert opens the advert popup (moved here from the Nodes header);
Lock locks the screen; a brightness slider. Holding a tile opens its
settings. Lock and sun glyphs added to the fonts.
Fixes from rc1 testing on the L2:
- GPS status icon: none when GPS is off (the module kept its last fix
valid, so it stayed green); grey on, green with a fix. ensureGps()
turns GPS on before trusting that stale fix.
- Screen wake: the panel wakes dark, a frame is drawn, then the
backlight fades in -- no white flash. Off fades out first.
- Power off / flat battery: the chip wakes every 30 s to look for USB
power and starts when plugged in (it slept with no wake source before,
until the reset button). Plugged in when switched off: stays off until
re-plugged.
- Message ages in a conversation refresh every 2 s, as on ui-new; the
message popup keeps its age, repeaters heard and delivery up to date.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
/prefs holds a header (magic, format version, size, CRC-32), the node's
position and NodePrefs as it is in memory, in place of /new_prefs' two
hand-kept field lists and 0xC0DE00xx schema bumps. A new field goes at the
end of the struct; moving one bumps PREFS_VERSION. sanitize() keeps every
value in range.
The first boot after an update from before 2.0 imports only the first
block of the old file, laid out the same in upstream MeshCore and Solo
(name, position, radio, BLE PIN, scope), then deletes it; everything else
starts from the defaults. Contacts, channels, scopes, waypoints and trails
are untouched.
Gone: the page-order and GPS-interval migrations, the unused
trail_interval_idx / trail_units_idx / repeat_extra_scopes; fav_sort_off
and msg_wake_screen_off become fav_sort and msg_wake (on by default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Docs: the E-ink section describes the landscape and portrait builds, what
the tall screens add, and the settings, with three screenshots; the e-ink
build flags; the release file names. Sim: each orientation gets its own
factory, so a page can load both, and simEinkScale 0 leaves the canvas'
CSS size to the page. CI builds both into solo-sim-wasm.zip (wasm/eink/).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Home pages as they are now (Status, quick panels, Map page), the Status
screen's tabs instead of Diagnostics / GPS / Sensors, lock clock Big /
Compact and the hint on a key press, battery curve on L1 and L2, "+ Send"
and a failed send, trail pin, vector map behind -D MAP_VECTOR.
- Developer guide: drawScreenHeader, soft frames, InfoKit, TabBar, a status
bar without blinking, toast and millis() rules; ui-core status; build
flags (GPS_SKYVIEW, MAP_VECTOR, HIST_ARCHIVE added, ui-tiny-only ones out).
- New simulator screenshots: the clock page and the Status page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Trail on the L2: 32768 points every 5 m, no simplification, no point
spacing setting; copied to the card every minute and restored at power-on.
The line keeps up with the position dot (incremental sync, pending point).
Map: a tap's finger jitter no longer turns follow off; the GPS button
shows when the map follows. The trail is drawn as one polyline with
breaks and off-view chunks skipped (an lv_line queued a draw task per
point).
Fewer rebuilds: conversation bubbles patched (new messages, delivery
marks), home mini-map dots reused, Nearby rows rewritten in place,
history read in runs and each file opened once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- CMD_GET_SCREENSHOT on colour screens: display type 2 (RGB565 LE),
32-bit payload size; ui-lvgl captureFrame() shared with the SD BMP
- ENABLE_SCREENSHOT in the L2 build; tools/screenshot.py decodes type 2
- docs and READMEs point to solo.marekzegarek.com/#pc-tools
- USB popup: "Keep card" instead of "Charge only" (only the card is lent;
charging and USB serial work either way)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Short pages by feature (getting started, messages, contacts, navigation,
tools, settings, lock, hardware) instead of one page per OLED screen, with
Wio Tracker L2 differences as notes; facts checked against the code
(keyboard scripts vs. hold-for-accents, {batt}/{dist}, L2 limits and
settings layout). Developer guides and build flags under docs/solo/developer.
Old docs/solo_features and its ~50 screenshots removed; a hero banner and
three simulator screenshots added; links updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Working plans (docs/development, docs/design redesign notes) removed; the
two developer guides moved to docs/developer/. README cut to devices,
flashing, links and building (Wio Tracker L2 added); its feature list and
doc tables moved to docs/solo_features/README.md. RELEASE.md describes the
Solo release flow. Upstream's GitHub Pages workflow (docs.meshcore.io)
dropped, CLAUDE.md untracked, Buy Me a Coffee back in FUNDING.yml.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The contributor's feature -- a PIN asked before the screen unlocks, on
boot, and when the magnet cover opens, stored as a salted SHA-256 -- on
top of this branch, with:
- ui-core/ScreenLock.h: set / check / isSet and the tries limit, shared by
L1 and L2. isSet looks at every byte (the PR tested only the first, so one
PIN in 256 silently disabled the lock). 5 misses pause entry for 30 s.
- NodePrefs: the fields at the tail after quiet hours, sentinel 0xC0DE0031,
sizeof 2880; an older file's bytes there are cleared. A sentinel bump no
longer resets display_brightness_pct from a file that already has it.
- DataStore: no AGPL header (the project is MIT), no whitespace churn.
- Keyboard: the number pad is a widget flag (pin_mode) with a prompt in the
preview ("New PIN", "Again", "PIN"), not keyboard_type = 2 written into the
prefs and restored after.
- L1 Settings: "Lock PIN" right after the schema's "Lock screen" row, typed
twice, at least 4 characters, saved at once (a power-off right after
setting it kept no PIN). Home is told about a boot-time lock once it
exists (also fixes booting with the cover closed).
- L2: the screen PIN moves from plain text in NVS to the same hash in
NodePrefs; the old one is migrated on first boot and removed. The pad
unlocks as soon as the hash matches from 4 digits on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- L1's MessagesScreen sends through UiCore::sendDirectText / sendChannelText
(its own copy of send + file + ACK tracking gone).
- ui-core/Telemetry.h: the dashboard fields (numbers, names, formats) and
sensor readings as text, each frontend passing its Style; L2 Home, L1's
clock page, lock screen, sensors page and GPS altitude use it.
- L2: the side button held in the first 8 s is the CLI rescue, as on L1.
- L1's repeater radio goes through rptctl.
- L1 Settings are built from SettingsSchema: short labels for small
screens, SCHEMA_* placeholders expand to the schema's sections, one
generic row (switch ON/OFF, bars for brightness / volume). 20 hand-written
rows and their tables gone; L1 implements applyDisplayPrefs /
applySoundPrefs. settings::text / step / indexOf shared with L2.
- Schema: auto-off gains 5 s; the advert sound scope reads "Direct".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Dead code gone: anim::fadeHide, radioctl::presetCount, the L2 board's
setSdPower / setGrovePower / expanderOK (awRead, gnssReset now private).
- buttonBar() / barButton() replace 7 copies of the popup button row.
- confirmBody(): one red-button confirm for reboot / power off, reset
counters, admin commands, preset and scope delete.
- tapConfirmed(): the 11 "tap again" buttons share one mechanism, 3 s
everywhere, the label restored when left alone.
- noteLabel() for ~30 wrapped notes.
- localTm() in NodePrefs.h and one MONTHS table: lvgl, MsgExpand, the L1
clock and lock screen.
- The sim keeps UI settings in an in-memory nvs::, so one set of load /
save helpers serves both.
- Asleep, the loop wakes every 50 ms (the button / touch poll), not 20.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings > Sound > Quiet hours (L2: its own group; L1: Quiet hrs / from /
until): from quiet_from to quiet_to (local hours, wrapping past midnight)
the buzzer is muted and a message doesn't wake the screen; the clock alarm
still rings. A manual mute or unmute inside the window stands until the
window ends. Off with the clock unset.
NodePrefs gains quiet_hours / quiet_from / quiet_to (appended to the file,
sentinel 0xC0DE0030; sizeof 2832 on nRF52 and ESP32), off by default,
22:00-07:00. hourInWindow() / localHour() are shared with the bot's quiet
hours. soundctl::tick() replaces autoTick() (Auto and quiet hours).
Also fixes the L2 side-button mute: it went by the mode, not by whether
the buzzer was muted, so with Auto + an app connected (and now quiet hours)
the first press muted instead of unmuting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Noise tab held the L2's interference hunt: parts of the board off one
by one, a slow cycle for a second radio, a spike hunt and three sweeps
(~90 s, L2 only). It is now one Measure: the noise floor on the mesh
frequency (median and 10th percentile of 5 s) and a +-1.1 MHz sweep round
it, ~12 s, with a short legend for reading it. Works wherever the variant
defines the radio.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The UI runs on Arduino's loop task, whose stock 8 KB stack had 340 B left
at its deepest point; a screenshot's file write went past it and reset the
device. The loop stack is now 16 KB (measured peak ~7.8 KB) and the
screenshot's line buffer is static. Diagnostics names the row
"UI stack free (lowest)".
With a cable in at boot, the USB popup waited for nothing and showed over
the splash; it now comes once the splash has faded.
Adds docs/development/plan-next.md, the plan up to the merge into dev.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hold an app on Home (or Settings > Home apps) to arrange them: every app
is shown, hidden ones dimmed with a +; a drag drops the app into the slot
under the finger, held at a screen edge it goes to that page; a tap hides
or shows it. Settings stays shown. The order is kept in NVS (letters per
app, lower case = hidden), saved on Done or on leaving Home.
Roadmap: note the speaker-knock experiment (DAC ramp didn't help).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The spike (a throwaway ui-oled frontend, not kept) ran in the simulator but
never got past building its screens on the L1: LVGL's pool and stack sit
outside the heap and UiCore needs 27 KB of it in one piece. Flash was fine.
Decision: no LVGL on the nRF52 boards; the v2 look goes into ui-new.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One .vpk file per region in /vmap (header, sorted index of tiles and
points, then the data), read in place with the index in PSRAM; loose
{dz}/{x}/{y}.vt/.vp files still work. osm_vector.py writes packs
(--pack/--name), reads OSM PBF extracts for a box (--pbf/--bbox, via
pyosmium) and picks label languages (--lang). Map tools > Vector regions
lists the packs on the card: show one on the map, delete it. No
on-device download: packs are made with the tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
osm_vector.py --dem adds contours from the Terrain Tiles on AWS Open Data
(SRTM, ~25 m; tools/maps/dem.py, standard library only: PNG decode,
smoothing, marching squares, line joining). Every 100 m from zoom 12,
every 20 m from zoom 15; the credit names the elevation source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hiking routes are stored per stretch with the waymark colours of every
route along it and drawn as side-by-side stripes on a white band (half
the route ways in the Tatra sample carry two or more routes), less
simplified; demanding / alpine paths are dotted. Named points (places,
peaks with height, huts, passes, springs, viewpoints, caves) come in
small .vp files and are placed by priority as a layer over the tiles,
clear of each other and of the map controls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tools/maps/osm_vector.py turns Overpass JSON into VT2 tiles (data zooms
10/12/14, per-feature bbox, simplified); VectorTileProvider draws them
into 256 px tiles (scanline polygons, thick lines with round joins) with
a small PSRAM cache of data files. Behind Map tools > Vector map (test),
raster where there is no vector data.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Download an area: a frame with four corner handles on the map (kept in
world coordinates, the map pans / zooms under it); a bar gives its size,
zoom range, tile count and size, the trails switch and Get; areas on the
card are outlined
- Map tools > Map areas: the downloaded areas (map/AreaStore.h,
/sdcard/maps/areas.txt) -- show (framed, outlined), rename, fill gaps,
refresh (force re-download), trails on / off, delete (in steps, keeping
tiles another area covers)
- TileDownloader: force and per-job trails options
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A square grid drawn under the tiles (map, Nodes map, Home minimap), its step
a round distance for the zoom in metric or imperial units, with a scale bar
one step long; gives position and scale where no tile is loaded. The
missing-tiles hint moves up, off own position.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Waymarked Trails' transparent hiking layer, kept in /sdcard/maps-trails and
blended over the base tile at render time (Map tools > Hiking trails, NVS).
An area download fetches each tile's trails after its base tile, so
re-running an area on the card adds just the trails; with live tiles on, a
shown tile missing its trails has them fetched. Tiles without a trail are
stored as 0-byte files (no cluster on FAT).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Home pages: favourites, the clock (tap for Clock) with three telemetry
fields picked by holding one (shared dashboard_fields), a minimap that
frames you, live shares and the target (tap for the Navigation map), and
the apps in 3x2 pages. The side button now returns to the clock page with
a cross-fade instead of going back. Home moves to HomeScreen.h.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Power: the UI loop sleeps until something is due (never with packets
queued); screen off puts the CPU at 80 MHz, the GT911 to sleep (unless a
tap wakes the screen) and the LP5814 in standby. GPS off now cuts the
L76K's rail and UART on the L2 (L2GpsProvider). The battery divider is
powered only for a reading (measured: settles at once); readings within
2 s are reused. The SD mount is retried at most every 5 s.
Fixes: WiFi left on after leaving a scan, live tiles' WiFi kept with the
screen off on the map, an ADC read every second for the status bar, touch
polled on every pass while dark, a scan cutting an update's WiFi, relay
count not refreshing in a channel thread, raw @[nick] in room previews.
Labels skip unchanged text (no redraw).
Helpers: scrollList, dimOverlay, settingRow, flexBox, nvs::get/put,
trailFilePath (a second save in the same minute no longer overwrites),
unreadTotal. Dead code removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Mentions: "@[nick]" in message text becomes "@nick" in the accent colour
(a span group); a mention of us is underlined and its bubble outlined.
Chat previews and the message popup's quote show "@nick" as well.
Emoji: every single-codepoint Twemoji and every flag, 16 px RGB565A8 in
flash, as the fallback font of each text size (fonts/ui_emoji.c, data
generated by fonts/emoji.py). Joiners, selectors and skin tones take no
space; a regional-indicator pair is swapped for the flag's private
codepoint before text reaches a label. Twemoji credit in Settings > About.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shown while WiFi is switched on (Settings > WiFi), bright when connected
(live tiles, map download, update), dim otherwise. The switch is read
from NVS once and cached. The status icon signature buffer grew so
changes to the last icons aren't missed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The six slots with unread badges on a card of their own (swiped to,
no clock), redrawn when messages arrive; the Favourites tile and screen
are gone, showFavourites() opens the card. The page dots sit at the
bottom on every card.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings > Display & power > WAKE > Tap to wake (NVS, on by default):
off, only the top WAKE button turns the screen on. The side USER button
doesn't wake the screen any more (a press in a pocket); held, it still
mutes / unmutes with the screen off. Roadmap: buttons corrected (WAKE is
the top one), USER to open the main menu page later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"solo", our version, upstream's and the build date (as digits) are drawn
in the wordmark's letters, the missing ones (l, v, d, digits, '.', '-')
made to match; a line with any other character falls back to Noto.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A progress bar and one line of counts while downloading (the zoom row
hides, it can't change then), failures on one line, the source as
"opentopomap.org", only the WiFi network's name (set up in Settings >
WiFi). The debug line (IP, RSSI, heap) is gone. Roadmap: mentions
highlight added, four items ticked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tiles fetched while browsing online go to /sdcard/maps-live with an
index of arrival order; past the limit (Settings > Storage, 16 MB-1 GB,
default 64 MB) the oldest are deleted a few per loop. Storage shows
their count and size and can delete them all. Downloaded maps are never
touched. Roadmap: live tiles done, second batch of user items added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JakubandClaude Opus 5.5