Same gap as the screens had: the bot reply, a typed message's {temp} and
the placeholder lists read only the sensors, so a board without one (the
L1) answered !temp with n/a while its telemetry carried a temperature.
The fallback moves to LocalSensors.h, shared by the screens, expandMsg()
and sensorPlaceholders(); the latter now takes the chip's temperature.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
USB drive and Format card closed the open map pack and unmounted, while the
tile task could still be reading a tile off the card (a map left open, a
prefetch). Both now wait for it first, as the map's own redraw does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Upstream's flag (meshcore-dev/MeshCore#3290, already set on the L1 OLED
builds) did nothing in the Solo UI. The L1 has a power switch; a pocket
could hibernate it by mistake from the Shutdown page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The telemetry reply adds the MCU temperature, the screens read only the
sensors: on a board without a temperature sensor (the L1) the app showed
a temperature and the clock field '--'. The clock, Status and the L2's
Home now fall back to the chip's, like the reply. The bot's !temp and
{temp} still read only the sensors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The name column always reserved 7-9 characters on the right, though a scan
row shows only 11 px of signal bars: names got about half the OLED.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rows kept a fixed order while their numbers came from page_order,
which still has slots for retired pages (Recent, GPS, Sensors): numbers
skipped, and Left/Right could swap a page with a slot that has no row, so
nothing seemed to happen. Rows now show the pages in Home's order; a move
skips retired slots and the highlight follows the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The keypad files came back with CRLF endings; MESHCORE_VERSION is the
MeshCore base on the splash (1.18.0), not the Solo version, which comes
from the tag; ENV_INCLUDE_GPS is already set by the ProMicro base. A long
Enter with the screen off acted on the dark screen: it now only wakes it,
like every other key, and restarts the screen-off timer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Simpson: Enter long-press on the keypad, GPS skyview; the last position kept
while GPS duty-cycling sleeps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Same gap as the ProMicro: an SSD1306 solo build without
OLED_MISC_FIXED_FONT, non-Latin text as filled squares. Flash 75%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The only SSD1306 solo build without OLED_MISC_FIXED_FONT: non-Latin text
showed as filled squares. ~14 KB flash (70.3% -> 72.3%).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The OLED popup fits 3 rows, a finished ping has 4; UP/DOWN were swallowed
so SNR back stayed hidden. Enter on any row sends. Fixes#50.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On the ProMicro the CardKB sits on Wire with the SSD1306. The poll task,
active while a frame goes out, read the keyboard mid-transfer: frozen
screen and a boot loop since rc3. Fixes#51.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The env is Simpson_companion_solo_dual, the suffix the release workflow
builds, and keeps the variant's build_unflags (they were overridden, so the
GPS pins were defined twice and the sensor drivers came back). Hardware
gets a Simpson section with sim1988son's schematic and the keypad's modes;
README lists the board.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A flow's point is where its contact is now, its end here where you are now
(GPS, else the position set in Privacy): shared by the L2 map and the
OLED / e-ink Nodes map.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CONTACT_FLAG_ROUTE_PINNED was bit 4 (0x10) of ContactInfo::flags, which
upstream 1.18 made isRemoteCLIAllowed(): keeping a route to a contact let it
run any CLI command on the device remotely (radio, name, PIN, reboot,
wifi.pwd), and a contact the app allowed CLI had its route held. The kept
route moves to bit 7 (0x80). Not in any release (the route editor came
after rc3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Every e-ink build: the nodes' names beside their dots, placed where they
cover no other name, dot or mark; the trail dotted and the waypoints.
- 4.2" and 4.26": the map on the left 3/5, beside it the selected node
(distance and direction, type, last heard, path, a compass rose) and,
with Flow on, a legend counting each kind over the last minute; the
kinds are told apart by their dashes (gfx::Dash).
- E-ink scale: a framed bar, half filled, ticks at the ends, the distance
over its middle. The OLED map is unchanged.
- The distance shows with the position set in Privacy too.
- Sim: sim_trail() lays a trail and two waypoints.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The newest lines are three strokes centred on the line, not two to one
side.
- A flow's points are drawn where the contacts and you are now, not where
they were when it was heard; dots and lines round the same way.
- With the GPS off, the position set in Privacy is your mark on the map
and where the lines end.
- Far ends are projected and clipped in floats: zoomed in, a far point no
longer overflows an int and turns a line around.
- Rings are clipped to the map and as thick as a line; the scale and the
north mark get a background; on e-ink the ring here stays 15 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- release-notes: v2.0 section covering all of 2.0 against 1.28, the
settings reset for rc users (name, radio, BT PIN), changes since rc3
in a collapsed section.
- README: centred title, badges (release, browser sim, docs, Discord),
three screenshots, the Buy Me a Coffee button; stale "BLE has
priority over USB" note removed; e-ink row split by panel; Community
section; pmow in contributors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A restart between commitTempFile()'s remove and rename left only the .tmp;
loads now recover it (prefs, contacts, channels, scopes).
- CustomLR1121Wrapper lacked readLiveRSSI/readLiveSNR: LR1121 boards didn't
compile.
- The repeater and room server sims gain DynamicConfigSerializer.cpp and
CommonRadioPrefs.cpp (broken since the v1.18 merge).
- Comments still describing the removed DualSerialInterface.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- DisplayDriver takes ColorVal; each driver's .cpp defines the UIColor roles
(window_bkg, primary_txt, ...) in its own values. ui-new draws in two:
window_bkg and primary_txt. OLED and e-ink look as before (sim screens
pixel-identical).
- E213, E290, LGFX, Null, ST7735, ST7789LCD, U8g2 taken whole from upstream
(with them the rewritten ST7735 driver and the Heltec V4 R8 TFT display).
- SH1106, SSD1306, ST7789, EinkGfxDisplay and the sim drivers converted.
- ui-orig, ui-tiny, simple_* get upstream's colour roles; the repeater's UI
taken from upstream (its power-off screen).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Bluetooth + USB (+ WiFi/Ethernet/UART per build) in one interface_manager,
as upstream; frames go to every enabled link, USB is read while BT is
connected. DUAL_SERIAL now means ENABLE_USB_INTERFACE.
- WiFi interface with upstream's wifi_* prefs and set/get wifi.* CLI.
- isClientConnected moved into ArduinoSerialInterface (DTR on nRF52 and
ESP32 native CDC).
- UI uses isBluetoothEnabled/enableBluetooth/disableBluetooth; turning BT
off leaves USB and the other links on.
- DualSerialInterface removed.
- Sim build gains DynamicConfigSerializer.cpp (broken since bd64c203).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NodePrefs is now NodePrefsFields (the fields) plus how they're saved: one
JSON key per field, upstream's keys under "radio", "gps", "repeat", "comp"
and "custom" (so either firmware reads what the other wrote of them),
ours under "solo". Saved atomically (temp file, then renamed), through a
buffer. 2.0-rc's binary /prefs is removed, not converted: 2.0 starts from
the defaults; /new_prefs from before 2.0 is still imported.
From upstream with it: txdelay / direct.txdelay / agc.reset.interval
(prefs and CLI), and the board's own settings through getCustom()
(Board::attachDynamicPrefs) in place of the merge's stopgap adapter.
ConfigSerializer reads values up to 191 characters (was 127): 140-byte
texts, an 80-byte table in hex.
Test: every field round-trips through the JSON byte for byte; the alarm
label tests expect "Once" (the label changed).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes and features from upstream: MACThenDecrypt / command buffer
overflow fixes, ACK forwarding delay, transport code 0 as unscoped,
hidden nodes don't answer DISCOVER, LR2021/LR1121 fixes, GPS cold-start
detection and waitFor()/drain(), NMEA fix-age counters, ESP32 RTC after a
crash, remote CLI by text message (TXT_TYPE_CLI_COMMAND),
PUSH_CODE_BINARY_RESPONSE, board.loop(), new boards (Wio Tracker L1 1W,
ThinkNode M4/M8, Muzi Base, Waveshare LR1121, Pico W).
Kept ours: NodePrefs, main.cpp, every UI, GxEPDDisplay. The companion CLI
stays MyMeshCli.h's handleCliCommand(); upstream's handleCommand() calls
it. The board's FEM gains go through attachDynamicPrefs() with an adapter
over our NodePrefs fields. Upstream's JSON prefs and MultiSerialInterface
come as their own stages.
Also: the display defaults were inside RADIO_FEM_TXGAIN's #else (a
missing #endif).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel froze and dimmed the screen as the finger started: a snapshot of
the whole screen (slow on the map) and a full-screen flush, so it stalled,
jumped and tore top to bottom. Now it slides opaque over the live screen
(a clear layer under it still takes the tap that closes it), built at start.
Its slide is timed by its own frames, at most 30 ms a frame: a slow frame
ended the 160 ms lv_anim and the panel just appeared.
The sky plot on GPS > Sky was a fixed 168 px, taller than what is left
under the title bar and tabs: now it takes that height.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The light theme read as the dark one inverted. Now something selected (a
tab, a segment, a tile, Fav) is a tint of the accent with the accent's text
(SEL_*), the full accent fill stays for the primary action; setting values
read in grey (VALUE); popups, the banner and the toast have a quiet grey edge
(EDGE), the toast is a dark pill; neutral greys the RGB565 panel keeps
neutral; the big clock graphite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings > Display > Theme: Dark / Light (NVS mc_ui/light). The colour
tokens are set once before anything is built, so a change restarts the
device. Text on an accent fill is the new ON_ACCENT (it was BG, white
in the light theme); each accent has a deeper hand-picked light variant
that reads on white and takes white text. The map's empty-tile fill and
grid and the areas' outlines follow the theme too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
L2: a Flashlight app on Home (a lightbulb icon added to the fonts): a
white layer over everything, the backlight at 100 %, no auto-off; a tap,
the side or the top button puts it away and the brightness back.
L1: Tools > System > Flashlight, the whole OLED lit at full contrast
until a key. Not on e-ink.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel starts a radius up, under the status bar, so its top corners
are hidden there instead of cut out over the frozen screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Map tools > Layers > Map picks what the map is drawn from:
- Topo: OpenTopoMap, as before.
- Light and Dark: Esri's grey canvases, no labels, up to z16.
- Satellite: Esri World Imagery.
- Esri Topo.
Each layer has its own folder for downloaded areas (/sdcard/maps-light,
-dark, -sat, -esritopo; Topo stays in /sdcard/maps) and its own live-tile
cache. Live-cache records carry the layer.
Esri serves JPEG: decoded with LVGL's tjpgd (LV_USE_TJPGD), whatever the
file name says. The layer is kept in NVS (mc_ui/layer); switching waits
while a download or a deletion runs in the current folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Every packet heard is drawn, by kind in fixed colours: advert, DM,
channel, request, ack, other, sent. One that can't be placed on the map
is a ring at your own position.
- A legend pill at the top counts each kind over the last minute.
- On a map without node markers, a flow brings its own nodes (a dot and
the name), fading with it.
- Copies of one packet (the same packet hash) share one fade, so a path
goes out as a whole, not segment by segment.
- 32 flows kept on ESP32 (12 on nRF).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WiFi starts and joins on internal RAM: ~42 KB the first time, ~25 KB after,
more for WPA. Free internal RAM had shrunk to ~20 KB after opening the map
(the tile decoder's 12 KB stack, the 32 KB I-cache, the DMA draw buffers,
UI statics), so a scan failed at once (esp_wifi_init: no memory) and a join
during a tile download timed out (AUTH_EXPIRE).
- ESP-IDF: CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY, and the esp_timer
task stack 8 -> 4 KB (it uses ~0.4 KB). Rebuild the framework libs:
pio run -e Wio_Tracker_L2_idf_libs.
- PSRAM_BSS (EXT_RAM_BSS_ATTR) on the UI's big statics: QR codes, map
state, charts, lists. .dram0.bss 115 -> 66 KB.
- The tile decoder's and fetcher's task stacks in PSRAM.
Free internal RAM, idle: 48 -> 105 KB; WiFi up: 57 KB, 29 KB at the
lowest while downloading tiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With two thumbs the second lands before the first lifts; the panel's
first point then jumped to it and LVGL saw one press sliding from key to
key, losing the first letter (or starting a scroll). A new GT911 track id
is now a release, then a press. The keyboard no longer hands a rolling
finger to a scroll or gesture up the tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Density from less chrome instead of smaller rows (ROW_H stays 44):
- titled screens drop the status bar; the title bar (APPBAR_H) holds back,
the title, the screen's actions and the time/battery on a pill; the status
bar returns for Home, the map, typing, the quick panel and the lock
- one radius (RADIUS) for everything tapped: buttons, tabs, choices, chips
- tabs are all segmented at TAB_H in the body (GPS, Clock converted)
- Nodes: chips row + sort + status line become one toolbar row with
Show / Order choices; Messages' All/Favourites is the same choice
- nav map: the target bar only while there is a target; the pin opens one
"Places" popup; back from a map options page restores the map and Map
tools as left, without a jump
- node detail actions at the top of the scroll; Home tiles fill the page
- rowsFit() leaves growing labels to the flex (a screen title cut to one
letter after Messages' filter changed)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every packet heard runs from its origin through the repeaters with a
position to this device; a packet sent is a ring. ui-core/PacketFlow.h
resolves them (UiCore::flow, MyMesh logRx/logTx -> Listener). ui-lvgl
draws them on the map's marker layer and repaints only their area while
they move; ui-new draws the last minute on the Nodes map ("Flow" in its
options). Setting: Map options > On the map > Packet flow, CLI map.flow.
Off by default. Sim-checked only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Core: PathEditor results are links (node k hearing k-1 and back); toNode()
off traces only the repeaters (a companion answers only with repeat on);
probe() traces to each repeater in turn after no reply; failures carry a
reason; an empty list saves "direct". PingEngine takes over a slot left past
its timeout. A kept route: the dropped heard path isn't announced to the app
nor bumps lastmod; an app update keeps the flag only if it leaves the route.
Marker boxes sized for every dot and name (overflow).
ui-lvgl Route: one line per node with out / back dB coloured by quality, tap
a hop to move / remove, tap the node to include it, Keep in the header, Find
where beside a no-reply status. ui-new Path: To node / Find break rows,
result alerts, cursor kept on its action.
Channels: ui-new re-sorts the list on entering it, cursor on the same channel.
Docs: Path and trace, Channel order. Sim hooks: open route, add channel,
open messages.
Checked in the browser sim (L2 + ui-new peer + repeater); not on hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shared chanctl::order() builds the channel list for ui-new and the L2:
favourites first, then by ch_sort. New ch_sort pref at the end of NodePrefs,
Settings > Contacts row and contacts.channel.order CLI key.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Core: PathEditor (UiCore::route) loads, edits, traces and saves the route to
a contact; MyMesh::sendTrace over an explicit route with per-hop SNRs,
setContactPath / setContactPinned. A route can be kept
(CONTACT_FLAG_ROUTE_PINNED, ContactInfo::flags bit 4): a path heard from the
node doesn't replace it and the last DM resend doesn't drop it.
ui-lvgl: Route screen (node detail), repeater picker by distance, picking
hops by tapping the nodes map (numbered badges, line, Undo / Done). The
map's markers are one drawn layer with hit-testing and name decluttering
instead of three objects per node.
ui-new: Path / trace view in the Nodes action menu; Add reuses the list
filtered to repeaters.
First cut: built for L2 LVGL, L1 OLED and L1 e-ink, tried on L2 only.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
PREFS_VERSION 2: settings saved by 2.0-rc1..rc3 are not read, the device
starts from the defaults (v1.x /new_prefs is still imported as before).
The fields appended at the end during the rc cycle move into their
sections (BLE off, battery curve, text/icon size, message alert, advert
position precision, lock screen look). ch_scope_follow and its rc1
conversion and the unused use_lemon_font are removed. Stale comments in
NodePrefs.h and Trail.h fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- L2 vector packs: a damaged count can't wrap the index size, and an
entry pointing past the file is refused.
- L2 map share-target list: sized for 40 long channel names and 16
favourites (it could overflow), off the stack.
- L2 SD history: a file with an unreadable header is set aside as .bad
instead of written over; Delete message history takes those too.
- Contact lookups by key or hash start after the reserved anon slots (an
empty one matched a 00 hop hash with a blank name); MessagesScreen uses
contactctl::hopName().
- Nearby keeps its selection by public key: deleting a contact shifts
the table.
- ui-new Live Share target cycle holds every channel and favourite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Joining #topic drops surrounding spaces and keeps the case, as
meshcore-open's derivePskFromHashtag() does.
- /prefs written by a newer build (bigger NodePrefs, same version): the
extra bytes are read through the CRC and skipped instead of resetting
every setting.
- A channel post from someone named "Me" is filed as "\"Me\": ...", so
the views don't take it for our own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- UITaskBase holds what both UIs' shutdown() and low-battery check share:
the saves before the goodbye sound, the power-down (GPS through its
provider) and the battery EMA and threshold.
- L2 SD archive: a channel's file is keyed by its secret only, so renaming
keeps the history; old files are renamed once at boot.
- L2 fetch: abandoning a request and the task finishing it are one critical
section (it could stay DONE for good); TileCache gets the read-side barrier.
- Text from a repeater or sensor no longer rings on the device (nothing to
open); a settings switch reads any non-zero value as on; the message
toast never cuts a letter in half; ui-new's GPS helpers ask UiCore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- set af / dutycycle / rxdelay reject nan.
- A TX power change from the app or CLI re-baselines APC.
- CMD_SET_RADIO_PARAMS stores repeat as 0/1.
- The alarm reschedules itself when the time zone changes.
- A late ACK for an earlier DM attempt marks it delivered.
- A new auto-advert interval counts from the last advert.
- Both UIs take the TX power range from radioctl, up to MAX_LORA_TX_POWER
(30 dBm on the GAT562 30S).
- The ping timeout comes from the airtime; 3-byte path hash mode pings with
4-byte trace hashes, and trace flags are right for width 4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Removing a scope moves the channels that used it to the default, not to
unscoped.
- The room bot ignores posts older than 5 minutes: the backlog a room
replays after login no longer gets answers.
- Adverts take the default scope from the scope list, as messages do; the
legacy fields always mirror it, and CMD_SET_DEFAULT_FLOOD_SCOPE with a
full list answers TABLE_FULL.
- The last DM resend drops the direct path and floods.
- /trail and /waypoints are written through a temp file.
- An admin login timeout keeps the saved password.
- History records read from the SD card are sanitised.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MicroNMEA's valid flag survives a power cycle, so the duty cycle saw the
old fix right after waking the receiver and stopped it again a tick
later: with GPS power saving on the position never updated. begin() now
clears the parser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the phone not connected, every frame (each packet heard, each advert)
went to the USB port. With nobody holding it open the core either drops the
bytes or lets its buffer fill, and streamWriteUntil() then spun out its whole
timeout. Skip the write when the native USB Serial has no host.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Neither is published or used any more: the LVGL firmware on Arduino-ESP32
3.x is the only L2 build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Contacts and rooms, the scope list, discovery and ping, APC and
screenshots move out of MyMesh.cpp to headers included at its bottom,
as MyMeshBot.h and MyMeshCli.h are, so upstream merges meet less of our
code. The feature matrix gains the 4.26" in its layout tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pure move: each section now sits in its own header, included where its
code was, so the order of definitions is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pure move: each block now sits in its own header, included where its
code was, so the order of definitions is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WioTrackerL1Eink426_solo_dual extends eink_solo like the 4.2" build and
sets only what differs: the panel, rotation, the 9x15 at 2x with Text and
Icon size, bulk writes at 8 MHz, 250 contacts and a 32-message queue.
Replaces the full copy of the flags in solo/wio-tracker-l1-gdeq0426/.
Docs: advert precision, text and icon size, the 4.26" in the feature matrix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A page break counted a space before every key, printing put none before
the first, so the skipped pages broke one key early and the next page
began with the previous page's last key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nodes: telemetry permissions per contact, reset path, share nearby
(L1 options menu; L2 node card with "Can ask for" switches)
- Settings > Privacy: fixed position (typed in, from a waypoint, cleared)
and the Bluetooth PIN; Settings > System: factory reset, asked twice
- Companion CLI (CMD_RUN_CLI_COMMAND 66 / RESP_CODE_CLI_REPLY 29, as
upstream; FIRMWARE_VER_CODE 14): upstream's command names plus a key for
every schema setting (get / set / keys)
- Screenshots move to 0x7E; tools/screenshot.py falls back to 66 / 29
- Your contact as a QR code (meshcore://contact/add): Status > System on
ui-new, Settings > About on the L2; Nayuki's qrcodegen made header-only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Settings schema gains Privacy (position in adverts, who can ask for
status / location / sensors), Adding contacts (all or by type, max
hops, replace oldest) and Advanced radio (path hash size, double ACK,
listen before talk, interference threshold, RX boost, RX delay,
airtime factor); both UIs build their rows from it
- Auto-advert carries position only when Position in adverts is on
- ui-new accordion holds 16 sections and 128 rows
- docs: settings, tools, feature matrix
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Watch13 env still compiled with -Ofast and had run out of flash
after the map, calendar and QR commits. -Os brings it to 70.7%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new: Status › System, Enter shows it full screen. L2: Settings › About.
One precomputed 25 x 25 matrix (ui-core/SiteQr.h) for both, so no QR
library; the URL in upper case keeps it at version 2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nearby › Map (ui-new): the positioned nodes and you on one view, scaled
to fit, with north, a scale bar and the selected node's name and
distance; Left / Right picks a node, Up / Down zooms on it, Enter opens it.
- Clock tools › Calendar (ui-new): the month with today and the alarm's
days; a tight grid on small screens, Left / Right pages the months.
- L2 Settings: a Message banner switch (on / off) in place of ui-new's
three-way alert setting.
- Simulator: sim_nodes() puts eight positioned contacts around Kraków.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new's messagesInView() and ui-lvgl's threadInView() hold the
lit-and-unlocked test the viewing checks repeated; the keyboard's three
copies of the backspace call deleteBeforeCursor(). A stale comment on the
cursor-mode hint goes, onDisplayOn() sits after the view helpers it calls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The cursor marks the character it stands before instead of pushing the
text apart: underlined while typing, an inverted block while moving it.
The grid stays on screen with the special row turned into the key hints;
Up/Down move a word, Hold-Enter deletes before the cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A conversation left open under the lock screen or a dark display no longer
counts as read: the counters and the lock screen's tally go up, and on
waking (L2: on unlocking) the conversation reopens on its first unread
under the "New" line, a typed draft kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hashtag channel names already start with '#'; the tiles added another
("##test"). chanctl::bareName() is now the one place that strips it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Contacts and paths are saved a while after the change and never while the
user is active, so a send no longer stutters on the 53 KB contact rewrite
(a path that came back unchanged isn't written at all). The clock is saved
every 30 minutes and restored no earlier than the firmware's build day.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both UIs: a channel, DM or room with unread messages opens on the oldest of
them (MessageHistory::firstUnreadChannel / firstUnreadDm, own messages not
counted), a "New" line above it, so it reads down to the newest. Nothing
unread: the newest, as before.
L1: the first unread is selected and scrolled up top with the line in view;
the channel's unread count now counts down as you read towards the newest.
L2: the page holding it, scrolled to the line; an incoming message scrolls
down only when the list is already at its end. Sim hooks: sim_unread (L1),
sim_open("unread") (L2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A pending DM shows a dot per send, as on the L1. The thread is read from
the SD archive, which a resend never updated: it does now, and the
thread's signature and patch state count the attempt.
- Nearby redraws when a node goes live, changes type or the units change;
the scan popup when a name or the remote SNR arrives.
- The user LED is active high: it was lit all the time and went dark
while transmitting.
- Sim hooks "dm" and "send" for testing a DM thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display > Message alert: Normal keeps the sliding banner; Compact shows an
envelope with the unread count beside the battery (in the header line where
there's no status row), blinking for 2 s; Off shows nothing. The blink only
ever brings the next frame earlier, so it no longer holds back the UI's
animations while it runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The limit is what the send leaves of MAX_TEXT_LEN: a channel post carries
"<node name>: ", a direct message resent more than three times keeps two
bytes spare, and placeholders count as they expand (msgtext::limit/sentLen).
Bytes, not characters. The path and packet header sit outside the payload;
static_asserts keep a full message within the radio frame on the longest path.
From 40 bytes left the count shows: on the L2 as a tag on the field's top
edge, on OLED/e-ink at the right of the preview's last line with the text
wrapped short of it. Input stops at the limit; a send still over (a
placeholder grew) is held. Sim hooks to open a compose with text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Our /prefs file can't be read from a folder of that name, and the rename
that commits each save can't replace one, so on a device moved over from
Meshtastic without erasing the flash no setting survived a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
JakubandClaude Opus 5.5
