Settings > Contacts gains "Expire" (Off/7d/30d/90d) and a "Prune now" action
that counts first and asks before removing anything. A contact with no
advert/update within the threshold is eligible; favourites are always kept.
Thresholds and their labels live in one NodePrefs table so the age shown and
the age enforced can't drift. SCHEMA_SENTINEL -> 0xC0DE002C (sizeof unchanged
at 2824, confirmed on native and a real WioTrackerL1 build).
Also fixes four bugs in the scope list from 89c02eea:
- removeScope() saved /scopes1 but never savePrefs(), so the ch_scope_idx[]
and repeat_extra_scope_mask fix-ups it makes were lost on reboot, leaving
shifted entries against unshifted indices.
- CMD_SET_DEFAULT_FLOOD_SCOPE wrote the legacy fields directly instead of
going through setPrimaryScope(), so the app's default-scope setting had
nothing reading it once sends resolved through the list.
- The reverse direction was stale too: an on-device "Set as default" never
refreshed default_scope_name/key, so CMD_GET_DEFAULT_FLOOD_SCOPE reported
a scope the device had stopped using. New syncLegacyDefaultScope().
- Upgrading from the old single Scope field set the default (so DMs kept it)
but left every channel unscoped, since "*" means unscoped, not "inherit".
loadScopeList() now reports when it migrated and begin() seeds the channels
that already exist, leaving empty slots alone.
"Set default" -> "Set as default", and setting it now says what it governs
("Default: DMs + relay") rather than leaving the [default] marker to imply
more than it does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Replace the single device-wide Scope text field with a small named list
(wildcard "*" fixed first, plus a movable default): each channel picks one
scope of its own (matching the app's per-channel region picker, surfaced in
the channel-history title), and the repeater's Extra scopes multi-selects
from the same list instead of comma-typed names. Both pickers are popups
(PopupMenu gains addCheckItem()/a fillable-square checkbox glyph) over the
existing screen rather than a full-screen takeover.
Also fixes a stray-bits bug where a pre-existing prefs file's own sentinel
tail could read into the new repeat_extra_scope_mask/ch_scope_idx fields and
silently reappear as a real pick later once the scope list grew into that
range.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Remote Bot's channel trigger reply, channel command reply, and !gps fix
result all mirrored their send into the on-device history with
addOwnChannelMsg() but never called armChannelRelay() afterward, unlike
the app's CMD_SEND_CHANNEL_TXT_MSG send which already did both -- so a
bot's own channel posts never showed which repeaters echoed them back,
while everything else did.
Factor the always-together pair (mirror into history, then arm relay
tracking from the send sendGroupMessage's sendFloodScoped already
tracked) into MyMesh::mirrorOwnChannelMsg(), and route all four call
sites through it instead of pairing the two calls by hand -- the bot
bug was exactly a dropped second call, so a new call site can no longer
add the first half without the second.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Same staleness bug as the build-date fallback: bypassing build.sh (a
direct `pio run`, an IDE Build button, the sim) fell back to a hardcoded
"v1.27-dev" literal that would silently keep claiming to BE v1.27 forever,
even once development has moved well past it. build.sh/CI's real
git-tag-derived FIRMWARE_VERSION is untouched -- only the bypass fallback
changes, to a version-agnostic "dev-<build date>".
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Contact updates (advert path cache, new/removed contacts, favourites) are
lazily debounced (dirty_contacts_expiry, 5s) to avoid wearing flash on
every mesh packet. CMD_REBOOT already flushed this before rebooting, but
UITask::shutdown() -- the low-battery auto-shutdown and long-press
power-off path -- didn't, so under continuous mesh traffic (which keeps
re-arming the debounce timer) a pending write could sit unflushed for a
whole session and be lost when one of those paths fired. Add
MyMesh::flushDirtyContacts() and call it from shutdown() alongside the
existing savePrefs()/saveRTCTime() flush.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Ports examples/simple_repeater to variants/sim/ (new sim_simple_repeater
native env + build_wasm_repeater.sh) and adds a JS "ether"
(variants/sim/web/mesh.html) that bridges two real companion_radio WASM
instances through a real simple_repeater instance in a strict A<->R<->B
topology (no direct A-B link), proving genuine relay routing rather than
a shortcut.
Also fixes multi-instance issues Phase 2's single-instance design never
surfaced: SimDisplayDriver's canvas context/id caching was keyed on a
single global instead of per-instance, and both wasm builds were missing
_malloc/_free/HEAPU8 runtime exports needed for the ether to poke bytes
into an instance's memory.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three names had grown around one idea. "Favourite" was a filter in
Settings, an invisible app-only flag on a contact, a device-settable bit on
a channel, and — on the Nodes screen — a menu row that actually pinned to
the Favourites dial. Nothing marked a favourite on screen, and the dial
only took chat contacts.
A favourite is now the starred flag (ContactInfo::flags bit 0 for contacts
and rooms, ch_fav_bitmask for channels), settable on the device everywhere
via a Fav: ON/OFF row, marked with a star on its row, and sorted to the top
of the list — in Messages, Tools > Nodes and the Locator target picker.
Settings > Contacts > "Favs top" turns the sorting off; it defaults on, and
is stored inverted so an upgraded prefs file reads back as on rather than
off.
MyMesh::setContactFavourite() writes the same bit the app sets and bumps
lastmod, so the two stay in sync. The DMs/Rooms = Fav list filters no
longer depend on having starred someone in the app first.
Pinning is now separate and explicit, and the dial takes contacts, room
servers and channels. Slots carry a kind (NodePrefs::favourite_kinds,
schema 0xC0DE0029) — a channel slot holds an index, so emptiness is decided
by the kind first, since channel 0's payload is all zeroes. Choosing what
to pin reuses the Messages screen's own Direct/Channels/Rooms browse
instead of a second picker built on the dial, which drops that picker, its
key/label tables and the now-unused getRecentDMContacts(). A filled tile
gained Unpin/Replace under Hold Enter.
Fixes a room server being pinnable and then unremovable: the picker's
recent-conversations tier didn't filter by contact type and room posts
share the DM history, opening one from the dial skipped the login
handshake, and Unpin only existed in the chat contact list that rooms never
appear in.
Also: PopupMenu::_visible was written and never read (render recomputes the
cap from display height), which is why menus with more items than the
"visible" argument always worked; Settings' all/fav values and the
dm_show_all comment said things that were not true.
Built for Heltec V3, Wio Tracker L1, Wio Tracker L1 e-ink and T-Echo Card.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Extends the existing single-boolean channel relay-echo marker into a
full count + list of distinct confirming repeaters, since each
repeater retransmit already appends its own identity hash to the
packet's path and the echo-matching hash deliberately ignores that
mutable path -- so every distinct repeater's echo of one send now
matches the same tracking slot instead of only the first.
Symmetrically captures the hop path a received DM/channel message
actually took, so a new "Path"/"Relayed by" row in the existing
Hold-Enter Options popup can show the resolved sequence of repeaters
(by contact name, or a hex fallback for an unknown one).
Also fixes a real bug caught during testing: the popup row's own
label ("Path (N hops)"/"Relayed by (N)") was built into a stack-local
buffer handed to PopupMenu, which only stores the pointer -- it
rendered as garbage once the building function returned. Moved to a
persistent member buffer.
Bumps the dev-build fallback version and adds release notes/docs
for this plus the two other 1.27 features already on this branch
(BLE retry backoff, marquee-scroll for selected long text).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Settings > Radio > Scope: type a community/region name on-device (derives
the shared key the same "#name" -> SHA256 way as DEFAULT_FLOOD_SCOPE_NAME),
previously only settable from a connected app.
- Tools > Repeater > Scope only + Extra scopes: only relay flood traffic
matching the device's own scope or a comma-separated list of additional
scopes, without changing what scope the device's own messages send under.
No-op while unconfigured.
- getCADEnabled()/getInterferenceThreshold() were hardcoded off on
companion_radio; CAD now auto-enables whenever RX power-save (duty-cycle)
is active, since the noise floor isn't kept fresh during duty-cycle sleep.
- Message truncation to fit the send frame could split a multi-byte UTF-8
character in half; now stops at the last complete character.
- The default "Public" channel was unconditionally re-added at every boot
before the saved channel list was loaded, so deleting it never stuck.
Only seeded now on a genuinely fresh device (no channel file yet).
- Tools > Nodes read contacts from the wrong starting offset, landing on
internally-reserved bookkeeping slots instead of real contacts -- showed
as blank "Unknown" rows and silently dropped that many real contacts off
the end of the list.
- resetContacts() only cleared the first few reserved slots, not the whole
contact table, contrary to its own comment; only reachable today via
private-key import, fixed to match stated intent regardless.
- Keyboard's multi-line text preview could render the cursor on an empty
line below short typed text instead of right after it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The pre-v1.13 "GPS Interval" setting (hidden from Settings ever since,
but its byte kept "for backwards compatibility") used a different option
set than today's duty-cycle presets -- its old 30s choice isn't one of
them. A device that had it set to 30 would load that value straight into
the new duty-cycle scheduler while "GPS pwr" in Settings showed OFF
(gpsDutyIndex() found no matching preset), silently cycling GPS on a
setting nobody could see or change. Unrecognised values now reset to OFF
on load, same as the existing out-of-range clamp this replaces.
Also refreshes MyMesh.h's FIRMWARE_VERSION/FIRMWARE_BUILD_DATE fallback
(only ever used by a `pio run` that bypasses build.sh entirely) -- it
was still "v1.17-solo.0" from 12 tags ago.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Two races between the new GPS duty-cycle scheduler and code that changes
GPS state independently of it:
- gpsDutyCycleLoop() capped every "GPS on" phase at a fixed 60s and would
stop_gps() as soon as a fix went valid, with no awareness of an
in-flight "!gps fix" bot request -- so a fix's own up-to-300s acquire
window (and its 10s averaging phase) could get cut short by the
scheduler shutting GPS off mid-request. MyMesh::isGpsFixPending() now
feeds into UITask's existing "is anything live using GPS right now"
hold, alongside trail/live-share/locator/nearby.
- setSettingValue("gps", ...) (Settings toggle, bot !gps on/off, CLI)
starts/stops GPS directly without resetting the scheduler's own phase
timer, so a manual toggle could land on a stale, already-expired
deadline left over from before -- immediately re-stopping GPS a tick
after turning it on. The phase timer now resets on every external
change, so the next duty-cycle tick re-arms fresh.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adopts hardware Channel Activity Detection (wired into
RadioLibWrapper::isChannelActive() alongside our RSSI-threshold check
and RX duty-cycle power-save), MCU temperature telemetry, LR2021
standby workaround, DISPLAY_SCALE/FLIP overrides, NRF52Board
shutdownPeripherals() refactor, and misc upstream fixes.
Declines upstream's ConfigSerializer-based NodePrefs rewrite,
MultiSerialInterface/interface_manager, and UIColor palette system —
each would have broken large parts of the Solo-specific feature set
(NodePrefs fields, per-variant single serial_interface, enum-based
DisplayDriver::Color). Flagged as candidate follow-up migrations, not
permanent no's.
Also fixes several pre-existing bugs surfaced while chasing silent
merge breaks (stale newMsg() override signature in ui-tiny/ui-orig,
dead UIEventType::newContactMessage case, missing ContactsIterator
init), bumps FIRMWARE_VERSION/MESHCORE_VERSION to 1.17, and fixes a
missing <cstdlib> include that broke the native ConfigSerializer unit
tests.
Verified via 13+ pio run builds across ESP32/nRF52, all 3 companion UI
variants, and 7 display drivers, plus the full native unit test suite
(33/33 passing).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three power-saving additions, prompted by comparing this fork's existing
RX duty-cycle support against IoTThinks/EasySkyMesh:
- RX duty-cycle watchdog: the SX126x's hardware RX<->sleep sequencer runs
with no MCU polling, so a desync (a known failure mode) previously had
nothing watching for it. A new watchdog samples the BUSY pin every tick;
no transition for too long triggers a soft re-arm, then a full chip
reset (with cached radio params reapplied, since std_init() resets to
compiled firmware defaults) if that doesn't clear it. Soft/hard recovery
counts surface on Tools > Diagnostics > Live as "RXPS wd s/h".
- Noise-floor recalibration during power-save: sampling was previously
skipped entirely while duty-cycling, freezing int.thresh interference
detection at whatever the floor was when power-save turned on. Now
borrows a brief continuous-RX window once a minute to take a fresh
reading before re-arming duty-cycle.
- GPS duty-cycling (Settings > System > "GPS pwr"): cycles GPS off between
fixes instead of running it continuously. Each wake waits for a fix
(capped at 60s) before sleeping again for the configured interval.
Repurposes the long-dead NodePrefs::gps_interval byte rather than adding
a new persisted field. A "is anything live using GPS right now" hold in
UITask keeps GPS continuously on whenever trail recording, live-share,
an armed Locator, or the Compass/Nearby-navigate view actually need a
live fix, so none of those features degrade. Locator crossing-state is
reset on each wake so a still-settling first fix can't read as a false
geofence crossing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- DM/room unread badges could claim messages the ring no longer held
(same class as the channel fix in 6470afaf, not covered by it):
getDMUnread()/getDMUnreadTotal() now clamp to dmHistCountForContact(),
and a new reconcileDMUnread() (called once per loop()) frees any
_dm_unread_table slot whose ring occupancy has dropped to 0, so a
17th sender isn't starved by stale entries. onContactRemoved() now
also clears _dm_unread_table -- the one per-contact table it was
missing.
- Shift didn't capitalise ł/ń/ź/ż (+ĺ/ľ/ň/ž): the Latin Extended-A
case-pairing rule assumed a single parity for the whole block, but it
flips around the unpaired codepoints ĸ/ʼn/Ÿ. Fixed with four
sub-ranges, verified exhaustively over U+0100-U+017F.
- Triple-click could still toggle the buzzer while locked on
PIN_USER_BTN/PIN_USER_BTN_ANA boards (joystick path already guarded
this).
- millis() wraparound: 4 absolute comparisons in UITask.cpp (battery
poll, auto-off, lock-wake, backlight) converted to the existing
(int32_t)(millis()-deadline)>=0 idiom; MyMeshBot.h's DM-throttle
eviction now picks the oldest slot by elapsed time instead of raw
t_ms, which picked the wrong slot right after a rollover.
- Long-press bypassed checkDisplayOn() on all 5 call sites -- neither
woke the display nor extended auto-off, and could deliver
KEY_CONTEXT_MENU to the invisible screen. Moved the gate inside
handleLongPress() itself instead of patching each site.
- CardKB's backspace/printable-insert branches didn't reset t9_cell,
so typing right after a T9 cycle tap could get silently overwritten
by a same-cell re-tap within the T9 timeout.
- buildContactList()'s counts[MAX_CONTACTS] was a 1400 B int array on
the 4 KB loop() stack; values are bounded by DM_HIST_MAX (32), so
now uint8_t.
- ACK table treated ack==0 as a wildcard: isAckPending(0) matched any
free slot, and processAck() with an all-zero ACK matched the first
free slot and returned its stale contact pointer. Both now skip/reject
ack==0, and the matched slot's contact pointer is cleared alongside
its ack hash.
- ensurePageOrderInit() could write one byte past page_order[13] when
migrating a saved order with all 13 slots full and CLOCK last --
guarded on insert_at < PAGE_ORDER_LEN.
Two findings from the same review were resolved as no-op decisions,
not code changes: !buzz over DM ignoring quiet hours is intentional
(the pull exemption is meant to cover the buzzer), and the offline
queue's full-queue drop-newest behaviour is upstream code, left alone.
Build-verified green on WioTrackerL1_companion_solo_dual (RAM 71.1%,
Flash 66.6%) and WioTrackerL1Eink_companion_solo_dual (RAM 73.0%,
Flash 67.9%).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Bot Actions (!buzz/!gps/!advert/!gpio1-4) ran their side effect
immediately during botScanCommands(), before quiet-hours/cooldown/
per-contact throttle were checked -- those gates only suppressed the
reply text, not the actual buzz/GPS toggle/advert/pin write. botCommandReply()
now only records what was requested; applyPendingBotActions() runs the
deferred effects once a wrapper's throttle checks pass and the ack sent,
mirroring the existing _locfix_requested pattern. resetPendingBotActions()
clears everything on every throttled/aborted path.
- CardKB's Fn+<letter> accent-popup shortcut bypassed the locked-input gate
(it called into KeyboardWidget directly instead of through the
enqueueKey()/dequeue path every other key uses, so it wasn't discarded
while _locked). Now checks _locked itself.
- Since a locked device now correctly ignores CardKB entirely, Fn+Esc
(single press) is added as CardKB's own lock/unlock gesture -- otherwise
a CardKB-only setup had no way to unlock. Esc rather than the adjacent
Fn+Backspace, to avoid an accidental press.
- botScanCommands() now parses up to two arguments per command instead of
one. Used by "!gps fix [seconds]" to override the default 90s timeout
(clamped 15-300s) for a poor sky view where 90s isn't always enough to
reach isLocFixReady()'s HDOP/satellite bar.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Satellite count alone is a poor proxy for fix quality -- few satellites
in good geometry can beat many in poor geometry. LocationProvider now
exposes getHDOP() (default -1 = unsupported); MicroNMEA implements it.
isLocFixReady() prefers HDOP <= 2.0 when available, falling back to the
old >=8 satellite threshold for providers that don't report it (e.g.
RAK12500/u-blox).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Same fix as hotfix/admin-login-timeout (5a5ebe9f). UITask::onRoomLoginResult()
dispatches by whichever screen is currently shown, not by who sent the
request, so a reply arriving after AdminScreen gave up (Cancel or the
timeout fix) could land on MessagesScreen instead and persist its own
unrelated _login_pw as the "confirmed" password for that pubkey.
MyMesh::cancelUiPendingLogin(pub_key) stops tracking the request on
give-up so a late reply matches nothing instead.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Turns GPS on (if it wasn't already), waits for a stabilised fix
(isValid() + >=8 satellites, then averages 10s of readings), sends the
position, and restores GPS to whatever state it was in before -- up to
a 90s timeout, after which it reports a partial fix (if it got any
samples) or plain failure.
Replies in two parts since a fix takes seconds-to-minutes, unlike every
other bot command here: an immediate "acquiring fix..." ack (through
the existing synchronous command path), then the actual position as a
separate follow-up message once ready, delivered to whichever
destination (DM/room/channel) the request came from. Only one fix can
be in flight at a time -- a second request while one is pending gets an
immediate "already pending" instead of silently replacing it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
AdminScreen's LOGIN phase had no timeout, unlike its COMMAND phase
(_cmd_deadline_ms). If a login reply never arrived -- most commonly a
saved password gone stale after the remote node's password changed,
silently dropped instead of nacked -- the screen stayed stuck with only
a manual Cancel to escape.
sendRoomLogin() now returns the same est_timeout sendAdminCommand()
already exposes; AdminScreen uses it to arm a deadline (poll(),
mirroring the COMMAND-phase pattern) that forgets the stale password
and returns to the picker on expiry, same as an explicit login
rejection already does.
Same fix as hotfix/admin-login-timeout (23f43cac), split out of this
branch's other in-progress work.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Auto-Reply Bot gains Actions (!buzz/!gps/!advert) behind a new per-target
toggle nested under Commands (bot_actions_dm/ch/room); off by default.
- Bot Trigger fields accept comma-separated multiple phrases, matching any
one fires the reply.
- New user-assignable GPIO feature (Wio Tracker L1): !gpio1..!gpio4 bot
commands plus a Tools > GPIO screen. Each pin cycles Off/Input/Output;
GPIO1/GPIO2 (P0.02/P0.29, the nRF52840's AIN0/AIN5) also offer a read-only
Analog mode via direct SAADC access. GPIO3/GPIO4 (P0.09/P0.10) are the
chip's NFC1/NFC2 pins, repurposed as plain GPIO via a one-time UICR
NFCPINS bit-clear in initVariant() (adapted from Adafruit's own
nfc_to_gpio example) -- confirmed working on real hardware.
- Fix: DM/room reply-prefix ("@[nick] ") stripping happened at the wrong
layer, hiding the "To:" header on DM replies and leaking the raw prefix
into room messages' list view; a related mismatch had the history
scrollbar's sizing pass wrap room messages with the sender name still
attached, disagreeing with the actual rendered text.
Build-verified: WioTrackerL1_companion_solo_dual and
WioTrackerL1Eink_companion_solo_dual both compile and link clean
(sizeof(NodePrefs) confirmed 2720 via real build, not guessed).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Renamed the vestigial Lemon/default font-switch naming (setLemonFont/
isLemonFont/drawLemonChar/lemonXAdvance/_use_lemon -> setSingleFont/
isSingleFont/drawGlyph/glyphXAdvance/_single_font) across DisplayDriver.h
and both concrete drivers -- both have been permanently single-font for
several commits, so the old names invited a future reader to think a
real switch still existed. Pure identifier rename, no logic changed.
Also extracted the byte-identical "SenderName: " prefix-splitting in
MyMeshBot.h's tryBotReplyChannel()/tryBotChannelCommand() into a shared
botChannelSenderSplit(), mirroring the existing botRoomSenderName().
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Tools > Admin: split the Radio tab's single "f,bw,sf,cr" comma-string
field (free-text keyboard) into 4 independent, type-appropriate rows --
Frequency (same digit-cursor DigitEditor Settings/Repeater use locally),
Bandwidth/Spreading factor/Coding rate (discrete-set LEFT/RIGHT stepping),
plus TX power and the 3 Routing numeric fields as number steppers and
Repeat as an ON/OFF toggle. Edits happen locally (zero mesh traffic per
keystroke); only Enter sends one combined `set`, Cancel sends nothing.
Full pre-release audit of all 16 commits since v1.22 (5 parallel focus
areas: display/font, keyboard/messages, Nodes/Admin, Bot/channels,
UITask+NodePrefs schema) turned up and fixed:
- Admin: fetched FK_NUMBER values weren't clamped to the field's range,
so a value already out-of-range could get stuck unreachable; fixed
commit-time float format noise (%.6f -> %.3f); Cancel/failed-login
always returned to the Nodes picker even when Admin was opened
directly from a node's Hold-Enter action -- now returns to wherever
it was actually opened from (AdminScreen::_from_picker).
- Keyboard: one-shot Shift was consumed after the *first* T9 multi-tap,
so cycling to the 2nd/3rd candidate always came out lowercase --
fixed by caching the cycle's caps state (t9_caps).
- Messages: history is numbered newest-first, so a message arriving
while scrolled up to an older one silently relabeled the view onto a
different message -- selection now shifts with the insert.
- Channels: onChannelRemoved() didn't clear ch_notif_override/
ch_notif_muted/ch_fav_bitmask despite its own contract comment
requiring it (now far more reachable via the on-device Delete);
an all-zero hex secret silently self-deleted the channel it was
just saved into (collides with the empty-slot sentinel) -- rejected.
- Room login: isRoomLoggedIn() indexed the login-tracking ring
directly instead of via its head offset, silently wrong once the
ring wraps (8+ rooms/session) -- the new on-device Logout depends
on this being right.
- Font/display: removed the now fully-inert Settings > Display > Font
toggle and the dead LemonFont.h (retired by the earlier misc-fixed
font unification, zero remaining includes); fixed a copy-pasted
"5x7" comment (font is 6x9), two meaningless dead ternaries, and an
OLED/e-ink inconsistency in the undefined-glyph fallback box offset.
- AdminField's `kind`/bounds fields no longer rely on default member
initializers inside aggregate-init: this toolchain's actual nRF52
build (unlike env:native) has no explicit -std= override, so it
predates C++14's aggregate-with-default-member-initializer rule.
Given an explicit constructor instead -- portable regardless of
standard, all existing field-table literals unchanged.
Docs updated to match: tools_screen.md (Diagnostics as a 3-tab
carousel, was documented as one flat screen), message_screen.md
(chat bubbles, newest-at-bottom, cursor mode, secret validation),
settings_screen.md (dropped the dead Font row), solo_ui_framework.md
(header menu_hint signatures, icon priority-drop, KeyboardWidget's
T9/alphabets/cursor-mode). release-notes.md gains the v1.23 section
covering all of the above plus the other 15 commits since v1.22.
Build-verified on WioTrackerL1_companion_solo_dual.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Messages:
- Add/edit/delete channels on-device (new ChannelsView, owned by the renamed
MessagesScreen — was QuickMsgScreen, whose name no longer matched its scope).
Channel secret entry supports a typed passphrase (SHA-256'd, same primitive
the library already uses for the routing hash) or a raw 32-hex-char key.
- MyMesh::setChannelLocal() factors out the setChannel/saveChannels/
onChannelRemoved sequence previously duplicated across the two
CMD_SET_CHANNEL branches, shared now by the BLE and on-device paths.
Tools > Admin (new):
- Log into a repeater/room server's admin account and send CLI commands,
the on-device equivalent of the app's repeater-admin feature.
- Commands are organised into category tabs (System/Radio/Routing/Actions)
with common get/set fields (name, radio profile, tx power, repeat, advert
intervals, ...) plus a free-text "Custom command..." fallback for anything
else. A field row fetches the current value, opens it pre-filled for
editing, and sends the change — falling back to a blank editor if the
fetch fails or times out.
- The admin password persists and self-heals exactly like room logins in
Messages: saved on a confirmed admin-level login, forgotten on a failed
one, left alone if merely under-privileged.
- New MyMesh::sendAdminCommand()/AbstractUITask::onAdminReply() plumbing so
a reply reaches the UI without touching the existing BLE/app CLI-terminal
path (queueMessage's should_display gate is untouched).
Shared TabBar.h extracted from NearbyScreen/BotScreen's independently
duplicated tab-carousel rendering (now a third consumer via Admin) — also
fixes neighbouring tabs vanishing outright when they didn't fully fit;
they now truncate with an ellipsis instead.
Keyboard: the combined "Ext.Latin" alphabet split into 8 separate,
linguistically complete per-language keyboards (Polish, Czech, Slovak,
German, French, Spanish, Portuguese, Nordic), and fixed an OLED-only bug
where tall accented glyphs overlapped the keyboard's separator line
(SH1106's Lemon-font ascent constant was 2-3px short for them).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Auto-Reply Bot gains a third target (room servers, alongside DM and
channel), new {name}/{hops} reply placeholders, and a DM all/favourites
allow-list. BotScreen is redesigned as a circular tab carousel (Direct /
Channel / Room / Other, same interaction as Nearby Nodes' filter tabs)
instead of one long scrolling list, which also exposed and fixed a
leftover coupling where Channel/Room trigger-replies and their !command
handling secretly depended on the DM tab's Enable/Commands toggles —
each target's Enable and Commands are now fully independent.
- NodePrefs: bot_room_enabled/prefix/trigger/reply, bot_dm_scope,
bot_commands_ch/bot_commands_room (bot_commands_enabled repurposed as
DM-only). SCHEMA_SENTINEL 0xC0DE001D -> 0xC0DE001F; sizeof unchanged
at 2712 (new bytes absorbed existing padding, verified via a
standalone host compile + offsetof check).
- DataStore: persists all new fields; seeds bot_commands_ch/room from
the old shared bot_commands_enabled on upgrade so existing
channel/room command behaviour isn't silently lost.
- MyMeshBot: tryBotReplyRoom/tryBotRoomCommand mirror the channel bot's
shape but post via sendMessage (room relays to members itself);
requires an existing login session with that room, same as a manual
post would. botDmSenderAllowed() gates DM trigger-reply/commands on
the favourites bit when bot_dm_scope=Fav.
- MsgExpand: {name}/{hops} as optional trailing params (default
nullptr/-1, no existing caller affected) — deliberately not exposed
on the general compose keyboard, only on bot Reply fields.
- QuickMsgScreen/UITask: room-target picker (mirrors the channel
picker), routing through the existing room-login prompt when there's
no saved password yet.
- BotScreen: tab carousel (LEFT/RIGHT switches tabs, UP/DOWN moves
rows, Enter is now the only way to change a value); Enable split out
of Channel/Room's combo row; Quiet Hours gained a stepper sub-mode;
Commands moved from a shared toggle into each tab.
- docs/tools_screen.md updated for the new tab layout and behaviour.
Not build-verified — no PlatformIO toolchain in this environment.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Context menus (PopupMenu, Nearby/QuickMsg call sites) go back to centring on
screen; the header's discoverable-menu glyph stays, but dropping the popup
out of its corner looked bad on some screens.
- Unread pill badge digit wasn't centred: Adafruit_GFX's classic built-in font
(SH1106/SSD1306) always pads a measured string by one trailing advance
column regardless of the glyph drawn, so centring on the raw width left 1px
more slack on the right than the left. New DisplayDriver::
textWidthTrailingGap() (0 by default) corrects for it on those two backends.
- On-device room Logout: mirrors the app's CMD_LOGOUT (drops keep-alive
tracking, forgets the saved password) so a room can be deliberately signed
out of from the Room options menu, not just re-logged-in.
Not build-verified — no PlatformIO toolchain available this session.
Turn Nearby Nodes into the single node hub and make its navigation legible.
Node management (no phone app needed):
- MyMesh gains addDiscoveredContact() and deleteContactByKey(); CMD_REMOVE_CONTACT
now reuses deleteContactByKey() (one delete path: contact + blob + room password
+ UI cleanup + lazy write).
- Action menu (Hold Enter) gains Add contact (a new scanned node), Favourite /
Unfavourite (pin to the first free dial slot), and Delete contact (confirm first,
defaults to Cancel). Actions are offered contextually per row.
- A pinned contact shows a star in the list row, next to any live-share diamond.
Absorb passively-heard adverts: refreshStored() folds getRecentlyHeard() nodes that
aren't already listed as name+age rows (All filter only — AdvertPath has no type),
so "recently heard" no longer needs its own page.
Legible filter navigation: the filter (LEFT/RIGHT) is now a visible tab strip — the
active filter is a centred inverted pill, neighbours fan out and wrap around
(circular, first<->last). Only whole tabs are drawn so labels never wrap a line.
Rename Tools > "Nearby Nodes" to "Nodes".
Both solo envs build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A discover response often arrives twice — the zero-hop direct copy and a
re-flooded copy relayed by another repeater carry different packet hashes,
so the mesh duplicate filter passes both. The standalone scan appended the
same node twice and app-driven discover forwarded both copies, so one
repeater showed up as two.
Track (tag, responder pubkey) for a short window in isDupDiscoverResp() and
drop the second copy in both the standalone and app-forward paths.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The on-device login path already saved room passwords to /room_pw; do the
same for logins issued by the phone/USB app (CMD_SEND_LOGIN). The password
is stashed when the login is sent and persisted once the server confirms,
gated to ADV_TYPE_ROOM contacts; a failed login forgets any stale saved
password, mirroring the on-device path. This lets the device post to a
room standalone after a reboot without re-prompting.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Log in to a room server from the device UI with no phone app: picking a
room prompts for its password (blank allowed for open rooms), and a
context-menu "Login..." allows re-login. Successful passwords are
persisted to a dedicated /room_pw file so a previously-used room logs
back in after reboot without retyping; a failed login forgets the
(now-stale) saved password so the next attempt prompts again.
The room-password file is written via a temp file + atomic rename
(new DataStore::commitFile helper), matching the crash-safety of
contacts/channels persistence.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
isValidRepeaterProfile() hard-coded the 150-960 MHz SX1262 range, which
would wrongly reject legal frequencies on any other chip. Take the freq
bounds as parameters and pass radio_driver.getFreqBounds() at both call
sites (repeaterProfileValid() and the load-time migration), so the chip's
own validated range is the single source of truth. DataStore.cpp gains a
target.h include for radio_driver (declared extern there).
DigitEditor::render() now zero-pads the integer part to int_digits: the
cursor addresses place values (100/10/1/0.1…), so a value with fewer
integer digits than int_digits would shift every glyph and misplace the
highlight. No visual change for the frequency field (always 3 digits).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the repeater filter knobs from "politeness" to "forwarding
filters" across code comments, FEATURES.md and the docs, and correct
references that hadn't followed the controls when they moved from
Settings › Radio to the dedicated Tools › Repeater screen.
Comment/doc accuracy fixes:
- NodePrefs: user_radio_presets are now written by both Settings and
Repeater (shared picker), not Settings only.
- DiagnosticsScreen: class header listed only some rows; spell out the
full set (forwarded, signal, pool/queue, error flags, reset gesture).
- RepeaterScreen header no longer claims to show live forwarding stats
(they live on Diagnostics).
- tools_screen.md: drop the stale paragraph claiming the Repeater screen
shows live stats at the bottom — it is config-only.
Comments/docs only; no behaviour change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings > Radio gains a repeater toggle, 16 community-suggested radio
presets plus manual Freq/SF/BW/CR tuning (digit-by-digit Freq editor),
4 persisted user preset slots, and the packet pool bumped 16->32 so
queued retransmits stop starving incoming-packet allocation while
relaying.
Four opt-in politeness knobs (skip-advert, max-hops, yield, min-SNR),
all flood-only and off by default, plus overhear suppression that
cancels a queued retransmit if a peer relays the same packet first.
Adaptive Power Control is suppressed while relaying (pins TX power to
the ceiling) and duty-cycle RX is forced off, since a repeater needs
to hear and relay at consistent power.
A dedicated Tools > Repeater screen consolidates the toggle, the
politeness knobs, and live forwarding stats, plus an optional "Custom"
radio profile — a dedicated frequency/SF/BW/CR for relaying, separate
from the companion's own network, band-matched to the companion
frequency by default and used everywhere a radio change can happen
(boot, on-device toggle, app-driven CMD_SET_RADIO_PARAMS, Settings
radio edits) so the device never silently falls back to the wrong
params mid-relay.
Diagnostics gains the actually-forwarded packet count, real heap-free
via mallinfo(), a reset-counters popup, and hardened loop-detect
bounds. Also: a frequency-floor fix and a float-equality preset-match
fix in the repeater profile logic, deduped BW-table/valCol/profile-
seeding helpers shared between Settings and the Repeater screen, and
a build.sh fix tolerating control characters in `pio project config`'s
JSON dump.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reply-bot overhaul on top of the trigger/reply auto-reply:
Robustness
- single botTriggerMatches() shared by DM/channel paths; named constants
(BOT_REPLY_COOLDOWN_MS / BOT_SCRATCH) replace magic numbers.
- per-contact DM throttle (8-entry ring) so a second sender isn't starved
while one contact is on cooldown.
- channel anti-loop: skip only when an incoming message equals our own reply
(was: any reply containing the trigger word — which silently killed channel
replies for the common "trigger word in reply" setup).
Features
- away / reply-to-all: a lone "*" trigger matches every message.
- independent DM vs channel triggers (bot_trigger / bot_trigger_ch); "*" works
on the channel too, bounded by cooldown + echo guard.
- query commands: a DM or monitored-channel message is scanned for "!word"
tokens — !ping/!batt/!loc/!time/!temp/!hops/!status/!help — merged into one
combined reply. DM = per-contact throttle, ignores quiet hours; channel =
broadcast, per-channel cooldown, respects quiet hours. !hops uses
getPathHashCount() (0 = direct).
- quiet hours (bot_quiet_start/end, local, wraps midnight) silence push replies.
- reply counter shown in the BotScreen header.
UI / storage
- BotScreen: 9 rows, scrolling list (no more cramming), field I/O via
fieldBuf()/fieldCap().
- prefs bot_commands_enabled / bot_quiet_start / bot_quiet_end / bot_trigger_ch
persisted; schema 0xC0DE000A → 0xC0DE000C with clamping + migration
(bot_trigger_ch seeded from bot_trigger on upgrade).
- docs: tools_screen bot section rewritten; FEATURES.md refreshed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
End-to-end delivery indicators on the device UI, drawn next to outgoing
messages and auto-scaled to the font (legible on landscape e-ink).
DM (and room servers, which share the DM path):
- Pending / delivered / failed marker driven by the real end-to-end ACK.
Pending shows a row of dots — one per send — so auto-resend progress is
visible before it resolves to ✓ / ✗.
- Auto-resend: new pref dm_resend_count (0-5, default 2), Settings ›
Messages › Resend. A pending DM whose ACK times out is re-sent (reusing
the original timestamp) until resends run out, then ✗. Driven from
UITask::loop so it completes in the background, independent of screen.
- Incoming dedup: a retry reuses the sender timestamp + text but carries a
fresh packet hash, so addDMMsg drops copies matching prefix+ts+text.
Channels (flood, no recipient ACK):
- ✓ only once a repeater echo confirms the send was relayed into the mesh;
no echo is normal, not a failure (no pending/fail shown). A small ring
tracks a burst of sends so each matches its echo. Receive-path hashing is
gated so the hot flood path is untouched when idle.
Shared:
- Markers shown in both the history list and the fullscreen message view.
- Reusable scalable mini-icon facility in icons.h (bitmap + auto-scale);
adding a new status icon is a bitmap plus one draw call.
No changes to the upstream mesh library (src/).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two independent, default-off toggles under Settings › Radio.
Pwr save: hardware RX duty-cycle (SX126x SetRxDutyCycle via
startReceiveDutyCycleAuto). The chip cycles RX↔sleep and wakes on a preamble —
no MCU state machine; recvRaw reads the packet exactly as in continuous RX.
Falls back to continuous RX on non-SX126x. (Replaces an earlier software-CAD
state machine that fought the hardware: polling a warm-sleeping chip gave a
phantom-busy channel that stalled TX ~4 s and dropped ACKs in the scan gaps.)
Auto pwr: Adaptive Power Control. tx_power_dbm becomes a ceiling; actual TX
power tracks the reverse-link SNR margin (measured above the per-SF demod floor,
EWMA-smoothed, proportional step with a deadband). Feedback comes from direct /
room-server ACKs and, for channels (no ACK), from hearing a repeater rebroadcast
our own flood; a lost confirmation ramps power back up so channel sends can't get
stranded below what the repeaters can hear.
Prefs schema 0xC0DE0009 (rx_powersave, tx_apc). Radio page / name bar show the
live TX power; noise floor reads n/a while duty-cycling.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reverts onDiscoveredContact to the upstream 4-param signature, adding a
separate virtual onDiscoveredAdvert(bool was_flood) with a default no-op
implementation. Only MyMesh overrides the new virtual; simple_secure_chat
and any future implementors need no changes on upstream merges.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
handleScreenshotRequest() reinterpret-cast every DisplayDriver* first to
SH1106Display* then to SSD1306Display*; both casts always produce a
non-null pointer, so the SSD1306 fallback was unreachable and on any
SSD1306 build we called SH1106::getBuffer() on a SSD1306 object — UB
that only happened to work because both backing classes share an
Adafruit_GFX layout at offset zero.
Replace the cast hack with virtual getBuffer()/getBufferSize() on
DisplayDriver, overridden in SH1106Display and SSD1306Display. MyMesh
no longer needs to know about either concrete type. const-correct the
buffer pointer and widen bufferSize to uint16_t while passing through.
Also fix the matching Python decoder: it sanity-checked length before
dispatching on resp_code, so a 2-byte RESP_CODE_ERR frame was reported
as "Frame too short" instead of the actual device error. Move the
length check after the resp_code dispatch and log the error code byte.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Adds the possibility to capture the device screen and save it as a PNG
image
- Wrap the code behind ENABLE_SCREENSHOT build flag, as per instructions
in README
JakubandClaude Opus 5
MarekZegare4
Scott Powell
Wessel Nieboer
vanous