setRamArea() and fastWrite() follow GxEPD2 1.6.2's private
_setPartialRamArea() and _writeImage() for the GDEQ0426T82; say so, so
whoever bumps the library knows to re-check them.
On an 800x480 panel the doubled 6x9 font and the status bar's icons are
tiny. Two opt-in build flags, each also a setting under Settings > Display:
- EINK_FONT_SCALE=<n>: the landscape font's pixel multiplier (stock 2).
Settings > Display > Text size (1x-5x) overrides it at run time
(DisplayDriver::setUiScale -> EinkGfxDisplay re-lays out).
- STATUS_ICON_SCALE=<n>: Home's status icons, battery and page-icon row
drawn at n x their pixel grid, the bar growing to fit. 0 = Auto, 1.5x
the text's pixel scale. Settings > Display > Icon size (Auto, 1x-8x).
Both live in their own /ui_scale file, so NodePrefs is untouched. Icon size
appears only where STATUS_ICON_SCALE is set; Text size appears on every
e-ink build with the full-refresh setting, and builds that set neither
flag draw as before until it is changed. The GDEQ0426T82 env defaults to
4x text with Auto icons.
Tested in the native sim at 800x480.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxAZVAbhhYr18Dd4guTQM1
GxEPD2 sends the panel RAM a byte at a time; on the nRF52's SPIM the
per-call overhead dominates, and an 800x480 partial refresh writes the
whole 48 KB several times. GxEPD2_426_GDEQ0426T82_Fast overrides the three
image writes to send each row in one transfer() call, falling back to the
stock path for the cases it doesn't cover (first write, mirror_y, PROGMEM).
Byte-for-byte the same data as the stock driver.
Opt-in per env: -D EINK_FAST_WRITES=1, and EINK_SPI_HZ (default 4 MHz,
8 MHz here, SPIM2's ceiling).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxAZVAbhhYr18Dd4guTQM1
New solo env WioTrackerL1_GDEQ0426T82_companion_solo_dual: the Wio Tracker
L1 (Lite) with a Good Display GDEQ0426T82 (SSD1677) on the board's 24-pin
e-ink FPC. Build config only. Extends WioTrackerL1Eink with its own full
build_flags list so the stock panel's model and rotation never reach the
compiler.
RAM: the 800x480 framebuffer is 48 KB, so OFFLINE_QUEUE_SIZE is 32 and
MAX_CONTACTS 250 -- with the stock limits UiCore's heap allocations fail
at boot and it loops.
Tested on hardware: Wio Tracker L1 Lite + GDEQ0426T82.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxAZVAbhhYr18Dd4guTQM1
ui-new: Status › System, Enter shows it full screen. L2: Settings › About.
One precomputed 25 x 25 matrix (ui-core/SiteQr.h) for both, so no QR
library; the URL in upper case keeps it at version 2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Nearby › Map (ui-new): the positioned nodes and you on one view, scaled
to fit, with north, a scale bar and the selected node's name and
distance; Left / Right picks a node, Up / Down zooms on it, Enter opens it.
- Clock tools › Calendar (ui-new): the month with today and the alarm's
days; a tight grid on small screens, Left / Right pages the months.
- L2 Settings: a Message banner switch (on / off) in place of ui-new's
three-way alert setting.
- Simulator: sim_nodes() puts eight positioned contacts around Kraków.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ui-new's messagesInView() and ui-lvgl's threadInView() hold the
lit-and-unlocked test the viewing checks repeated; the keyboard's three
copies of the backspace call deleteBeforeCursor(). A stale comment on the
cursor-mode hint goes, onDisplayOn() sits after the view helpers it calls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The cursor marks the character it stands before instead of pushing the
text apart: underlined while typing, an inverted block while moving it.
The grid stays on screen with the special row turned into the key hints;
Up/Down move a word, Hold-Enter deletes before the cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A conversation left open under the lock screen or a dark display no longer
counts as read: the counters and the lock screen's tally go up, and on
waking (L2: on unlocking) the conversation reopens on its first unread
under the "New" line, a typed draft kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hashtag channel names already start with '#'; the tiles added another
("##test"). chanctl::bareName() is now the one place that strips it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Contacts and paths are saved a while after the change and never while the
user is active, so a send no longer stutters on the 53 KB contact rewrite
(a path that came back unchanged isn't written at all). The clock is saved
every 30 minutes and restored no earlier than the firmware's build day.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both UIs: a channel, DM or room with unread messages opens on the oldest of
them (MessageHistory::firstUnreadChannel / firstUnreadDm, own messages not
counted), a "New" line above it, so it reads down to the newest. Nothing
unread: the newest, as before.
L1: the first unread is selected and scrolled up top with the line in view;
the channel's unread count now counts down as you read towards the newest.
L2: the page holding it, scrolled to the line; an incoming message scrolls
down only when the list is already at its end. Sim hooks: sim_unread (L1),
sim_open("unread") (L2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A pending DM shows a dot per send, as on the L1. The thread is read from
the SD archive, which a resend never updated: it does now, and the
thread's signature and patch state count the attempt.
- Nearby redraws when a node goes live, changes type or the units change;
the scan popup when a name or the remote SNR arrives.
- The user LED is active high: it was lit all the time and went dark
while transmitting.
- Sim hooks "dm" and "send" for testing a DM thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display > Message alert: Normal keeps the sliding banner; Compact shows an
envelope with the unread count beside the battery (in the header line where
there's no status row), blinking for 2 s; Off shows nothing. The blink only
ever brings the next frame earlier, so it no longer holds back the UI's
animations while it runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The limit is what the send leaves of MAX_TEXT_LEN: a channel post carries
"<node name>: ", a direct message resent more than three times keeps two
bytes spare, and placeholders count as they expand (msgtext::limit/sentLen).
Bytes, not characters. The path and packet header sit outside the payload;
static_asserts keep a full message within the radio frame on the longest path.
From 40 bytes left the count shows: on the L2 as a tag on the field's top
edge, on OLED/e-ink at the right of the preview's last line with the text
wrapped short of it. Input stops at the limit; a send still over (a
placeholder grew) is held. Sim hooks to open a compose with text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Our /prefs file can't be read from a folder of that name, and the rename
that commits each save can't replace one, so on a device moved over from
Meshtastic without erasing the flash no setting survived a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each tab a screenful: the sky plot beside the fix; the bars with a fixed
dB-Hz scale and the constellations; and Details with whatever else the
receiver reports (correction, locator, course, DOPs with their rating,
signal averages, NMEA counts). Sim: sim_open("gps").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Chart.h draws Diagnostics > History, the noise sweep and the trail's height
profile: round values up the left, labels along the bottom, a solid fill
(no transparency) and, under a finger, the sample's value and when / where.
Sim: sim_open("histdemo") / ("profdemo") fill them with made-up data.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Home and the lock screen draw HH:MM in ui-core/Lettering.h's block digits,
the seconds smaller on the same baseline, leaning smoothly per screen row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ACCENT_DIM (the accent mixed toward black) came out brown on selected
tabs, chips, segments and own bubbles. They take the accent with dark
text now, as primary actions and the quick panel tiles do:
styleSelected() sets the fill, the pressed shade and every label under
it. Own bubbles: dark text, age and delivery mark (green or red can't be
read on amber); the melody editor's selected note is outlined, the
sounding one filled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
build_unflags runs after build_flags, so unflagging the board's
-D DISPLAY_ROTATION=1 in [eink_solo] also removed the landscape env's
identical flag: the panel came up portrait (GxEPDDisplay's default 0) and
UITask::applyRotation's restore was compiled out, so the rotation setting
didn't stick. Only the portrait env unflags it now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Quick panel: the screen under it is frozen and dimmed in one snapshot
(freeze::early), so the slide redraws an image and the panel; a tap or
swipe up under it closes it and nothing under it takes a touch. Tiles are
two pages of four with dots; tiles restyle only when their state changes.
- Home: a touch that starts on the top layer (the quick panel, the status
bar) is not a page swipe -- a sideways drag of the brightness slider over
Home ended the drag and turned the page under it.
- Keyboard: OK and hide don't put the cursor back on a field whose keyboard
is gone.
- BotScreen: adminRowBox -> centerRow (the sim build broke in 3293ac09).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ui-lvgl: navTextEntry()/TextEntry replace eight copies of popup + field +
keyboard wiring; one byte-capped insert callback instead of two.
- ui-new: drawHeadedBubble()/BubbleMark replace the duplicated DM and channel
bubble drawing in MessagesScreen.
- GpsSky::halt(): stopping the receiver ends an unfinished search but keeps
the first-fix time; keyboard cursor blink restarts after a key.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
- GPS: stop() resets the sky state so the 'Searching' timer does not run
while the receiver is off; the status page shows it only when GPS is on.
- L2 keyboard: put the FOCUSED state back after typing a key or picking a
variant, so the cursor is drawn again after characters like a-ogonek.
- Quick panel: drop the full-screen dim (a blend per frame), so the screen
below stays interactive; tiles are one sideways-scrolling, snapping row;
the brightness slider no longer animates and only updates the backlight
when the value changes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeBrxKyHHxWsmttVkUdBrj
pmow
JakubandClaude Opus 5.5