- Each host backup carries the node it belongs to, read from its source host or its name (`hostcfg-<node>`, a job of this node or its PBS backup ID); both backup lists also return the node name.
- The backup list offers This node / All nodes when some backup belongs to another node, with This node as the default, a count that follows the choice and a note with the backups not shown.
- Backups whose node cannot be read from their name are listed under All nodes.
- A local backup made on this node by a job that no longer exists is marked as Former job, read from its metadata file; backups without it, manual ones and those of other nodes are not marked.
- New texts in English and Spanish, modelled in the translation steady-state test.
- Tests for the node and the former job read from each backup, and for the cluster node membership notifications.
- "Install an image that is not in the catalog" also takes an oci-compose pasted in the terminal, next to reading it from a file or downloading it from an address.
- oci/README.md and the documentation page of the option describe the three ways, and the README links to the thread for suggesting applications (#440).
- oci/VALIDATION.md points to discussion #440 instead of the closed#360.
- The oci-compose tests pass on a host set to another language and without python3-jsonschema.
OCI manager Apps
- "Install an image that is not in the catalog" reads an oci-compose from a file of the host or from an address.
- A file written by hand states the image, its ports, variables and volumes, and what the installation asks; the rest is completed when it is read. A complete file, or the record of an installation, is installed as it is, and of a record only the template is used.
- Errors name the field they are in, also on a host without python3-jsonschema.
- oci/README.md describes the engine and the oci-compose block by block, with two examples in oci/examples/.
- The documentation page of the option covers it, in English and Spanish.
Log2RAM (reported by @f3rs3n)
- The sync removes the old active journal file from the disk copy, so a boot no longer restores it and journald deletes its oldest archives first. Log2RAM optimization 1.7; it takes effect from the next reboot.
Translations
- The bot keeps "oci-compose" as written.
- Spanish texts for the new option and for the Log2RAM notice.
A container volume is filled with what the image holds at that path, with its owner and permissions, as Docker does with a new volume. It was only done for the recipes that asked for it. Images that run as a user of their own and do not take PUID, such as Node-RED or Grafana, find their data directory writable and start.
The main menu opens with a search that finds an option of ProxMenux, an application of the OCI catalog or a Helper-Script by its name or by related words, in that order, and by category after the names.
Every result opens what its name says and nothing is run by the search itself: a script starts at its first screen, an application opens its page, an option of the post-install or a system utility opens its list with it marked, and an option that lives inside a menu is opened by that menu, which stays behind it.
The menus take the option to open as an argument and behave as before without one. The Helper-Scripts catalog is kept on the host and refreshed once a day. The main menu, the lists of OCI manager and the Helper-Scripts menu share the same height.
An addon is run where the catalog lists it: on the Proxmox host, inside an LXC chosen from a list, or wherever is chosen when it can be both. The LXC is started when it is stopped, and OCI containers are left out. Until now every addon ran on the host.
A script is downloaded whole before anything runs, so a failed or empty download runs nothing. Descriptions and notes the catalog writes in HTML are shown as plain text.
The menu opens one script given as argument, and is as tall as the main menu.
The image published by the Duplicati project joins the catalog next to the LinuxServer one.
Bitcoin Knots is hidden until its image closes the application cleanly when it stops; EmulatorJS and SickChill, until their images are published again.
Manyfold, BookStack and NetBox declare the services they need. Lychee and Manyfold install with their own SQLite database.
Folding@home, Healthchecks, NetBird, Speedtest Tracker, Twingate Connector, HA Bridge, ChatGPT Next Web, DDNS Updater and Minisatip explain each value, propose one or leave it to the advanced installation.
Pinchflat gets 1024 MB.
What a Compose file reserves is the least the application is promised, not the most it may use. 81 recipes had taken it as the memory of the container, as low as 128 MB, and the kernel stopped applications such as Home Assistant Official and UniFi Network.
Without a limit in the file the container gets the standard 1024 MB, or the reservation when it is larger. A limit the file sets is kept.
A path offered as a container volume or as a host directory is created for the user the application runs as, also as a volume, and is always mounted: the option of leaving it out is gone for those folders.
A container volume is never read-only, which is kept for a host directory that already holds the content, and the time files of the host are not turned into volumes.
An application that expects a database or another service that is already running shows it, with the address of its image documentation, before anything is asked, and its page lists it under Needs.
The installer windows share one width; the page of an application and the final summary are a little wider.
feat(oci): offer access to a host directory that already exists
feat(oci): gather the file-sharing applications in Files & Sharing
fix(oci): ShareCoveX keeps its settings in a 1 GB volume, and the new translations are mended
Installed for real on a lab host through the default and the advanced
installation, with a host directory and a container volume to share, and
removed again. The recipe states what was exercised: clean install and
service health; the rest of its validation fields stay pending.
ShareCoveX is a file server with a web panel that publishes directories
over SMB, NFS or both. Its recipe declares that it shares directories, so
the installation asks for them one after another, in the default mode as
well: each is a container volume or a directory of the host, mounted under
/shares with the name given to it. Modify offers to add more.
The advanced installation also offers the privileged profile NFSv4 needs;
the default one never asks and stays unprivileged. A secret can declare a
minimum length, and the recipe opens the Files & Sharing category.
- An observation is never left out for its age and cannot be dismissed:
the rule that hid it after 30 days without a repetition, and the
clean-up that marked the ones of a missing device, are removed.
- The ones earlier versions left out are shown again; an error that came
back while hidden appears with its first date and its full count.
- The audit attributes recorded events to a disk by its serial number.
- Nothing is written under /etc/pve unless it is the mounted cluster
filesystem; a Monitor that starts while pve-cluster is being restarted
waits for it and registers its webhook afterwards.
- The Monitor service is ordered after pve-cluster.service.
- The settings are written only when they have to change. The copies
taken before a change are kept in
/usr/local/share/proxmenux/backups/pve-notifications, and the ones left
in /etc/pve by earlier versions are moved there.
- Uninstalling the Monitor removes its target and matcher from Proxmox.
Reported in #427.
- The observations of a disk belong to its serial number, not to its
connector: a replaced disk starts clean, and the badge of the list
counts what the detail of the disk lists.
- An OCI container is recognised while it is still being installed, so
an image that carries Docker inside is not offered Docker.
- Links use the IPv4 address of a container and write IPv6 in brackets;
an answer without an address of its own is read again.
- The Monitor restores, when it starts, the DHCP clients of containers
that were started from it.
- The backup taken before an update or a modification is made on another
storage when it does not fit on the system disk; an operation without
room says so before anything is stopped.
- Privileged containers, relaxed AppArmor or seccomp, process limits, the
host monitors Glances and Netdata and single-file host mounts are
rebuilt and recovered like any other application.
- HAOS One installs the docker-haos image: port 8123, host time zone,
unprivileged, watchdog proposed by default; it is updated and modified
with Home Assistant's own check on the rebuilt container.
- A container that reboots itself gets its DHCP client back.
- The installer takes the address of the container's own interface, and
the notes of a suite or stack container show its LAN address.
- Seerr installs: its volume belongs to the image user and
no-new-privileges goes through the include of the container.
- Removing an application deletes its seccomp profile.
- Host restore notification: reports its tasks and no longer calls the node fully ready.
- Watchdog notification: covers an application that did not start as well as one that stopped again.
- OCI: Modify summary, Immich recognition preview, private network kept by another guest, empty USB list.
- gzip diagnostic no longer says that nothing changed.
Source questions from the Italian review by @f3rs3n.
- New service that starts again an OCI application that stopped on its own, such as Frigate after Save & Restart. A stop or shutdown asked by the user, a backup, a migration and a ProxMenux operation are never undone.
- The installer asks it in both modes and proposes what the recipe declares; it is changed from the management menu or with the Watchdog switch of the container modal in the Monitor.
- Notifications when the watchdog restarts an application and when it keeps stopping.
- The service is recorded in the change journal, and the feature is documented.
- The option that edits an installed application is Modify for one container and for a multi-container application, in the OCI menu and on the Monitor button. Recreate is only the rebuild of a multi-container application as it is.
- A stack recreation says "Recreating" and "Recreated" in its steps instead of "Updating".
- The notes of the GPU, Coral, disk and share menus no longer name the option.
- Spanish for the new texts; the English copies of the stack texts are removed from de, fr, pt and sv so the bot translates them.
The menu registers restored containers and refreshes the carried record
before it lists or manages an instance. The tests that run those menu
functions in isolation provide the new helpers they call.
An image published with a Docker-format manifest is saved for Proxmox
under another digest than the one its registry serves. The App tab reads
the installed version through the digest the registry served the image
under, and decides an update by comparing the platform manifest that
digest resolves to with the one the tag points at.
The installation record of an OCI application travels with its container:
a copy inside the container and another in /etc/pve, written together
with the one kept on the host. A container restored on a newly installed
Proxmox, restored with another ID or moved to another node of a cluster
is recognised and registered again, with its private network, hookscript,
Rclone mount, host firewall rule and NVIDIA runtime. The Monitor offers
the same recovery from the Updates tab.
AMD GPUs are offered by generation. A GPU the ROCm image supports takes
the profile as it is; one of a supported family (Radeon 680M, 780M) is an
experimental option that asks for confirmation and is never proposed; an
older one is not offered. The GPU is checked with a real inference before
the installation accepts it. Recreate changes what runs recognition in an
installed Immich, between the CPU and a GPU of the host.
Updates:
- A failed update that is restored and checked removes its temporary
container and the disks of the failed attempt.
- Every container volume is part of the backups, so Jellyfin, Plex and
Hugo update with their default installation.
- An image published with a Docker-format manifest is recognised by its
layers and build time and updates.
- The Proxmox notes of a multi-container application link to its LAN
address.
- Immich asks what runs its video and its recognition in one menu, in both
modes, and gives the GPU to the server and to Machine learning; AMD uses ROCm
- Frigate, Ollama, llama.cpp, Faster Whisper and Piper take the image built
for the chosen GPU
- The acceleration menu offers only what the host can run
- An update or a recreation sends one notification with its result instead of
the stop, backup and start of each container
- A private bridge with nothing connected is not reported as down
- Secondary containers of a stack appear in the App tab with their version and
logo; Secure Gateway shows the same update state in both views
- A mistyped value in the wizard asks the same question again
MacRimi
